Delta Armory Airsoft

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're into the race gun look and the performance advantages which come with it, you'll be a big fan of the P06 Slipstream EU17 Gas Blowback Pistol from Delta Armory! Boasting full metal construction, a dynamic weight-reduced ported slide, light-enhancing iron sights and a super-grippy imitation hand-stippled frame, this EU series comes customised straight out of the box with stylish, elite looks.

The P06 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

If you prefer speedy styling over standard mil-spec sidearms, the P06 Slipstream EU17 Gas Blowback Pistol is the Delta Armory pistol for you. With a super-slick external design inspired by the best real steel pistols on the market, the P06 Slipstream looks far more expensive than it actually is!

If you need a full metal sidearm with custom styling and entry-level pricing, you sure are picky! Thankfully, Delta Armory has met your demands with the P05 Tiger EU17 Gas Blowback Pistol. This GBB pistol is internally based on the Tokyo Marui EU17 system, giving it an almost unlimited aftermarket of customisation and upgrade options, though it's pretty darn custom as it comes! Fitted with a stylish custom slide based on the real steel ZEV SOCOM slide, the violent-looking sawtooth serrations really make this one stand out!

Completing the customised aesthetic, the P05 is also equipped with a super-grippy imitation hand-stippled frame, a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

Supplied in a hard polymer storage case complete with wave foam padding, the P05 is a generous package for those who like custom looks without all the fitting hassle. If you're into mean-looking pistols based on the best of the best in the real steel pistol world, the Delta Armory P05 Tiger EU17 Gas Blowback Pistol will definitely put a smile on your face!

If you need a full metal sidearm with custom styling and entry-level pricing, you sure are picky! Thankfully, Delta Armory has met your demands with the P05 Tiger EU17 Gas Blowback Pistol. This GBB pistol is internally based on the Tokyo Marui EU17 system, giving it an almost unlimited aftermarket of customisation and upgrade options, though it's pretty darn custom as it comes! Fitted with a stylish custom slide based on the real steel ZEV SOCOM slide, the violent-looking sawtooth serrations really make this one stand out!

Completing the customised aesthetic, the P05 is also equipped with a super-grippy imitation hand-stippled frame, a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

Supplied in a hard polymer storage case complete with wave foam padding, the P05 is a generous package for those who like custom looks without all the fitting hassle. If you're into mean-looking pistols based on the best of the best in the real steel pistol world, the Delta Armory P05 Tiger EU17 Gas Blowback Pistol will definitely put a smile on your face!

If you need a full metal sidearm with custom styling and entry-level pricing, you sure are picky! Thankfully, Delta Armory has met your demands with the P05 Tiger EU17 Gas Blowback Pistol. This GBB pistol is internally based on the Tokyo Marui EU17 system, giving it an almost unlimited aftermarket of customisation and upgrade options, though it's pretty darn custom as it comes! Fitted with a stylish custom slide based on the real steel ZEV SOCOM slide, the violent-looking sawtooth serrations really make this one stand out!

Completing the customised aesthetic, the P05 is also equipped with a super-grippy imitation hand-stippled frame, a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

Supplied in a hard polymer storage case complete with wave foam padding, the P05 is a generous package for those who like custom looks without all the fitting hassle. If you're into mean-looking pistols based on the best of the best in the real steel pistol world, the Delta Armory P05 Tiger EU17 Gas Blowback Pistol will definitely put a smile on your face!

If you're not the type to customise your pistol but still want a custom look, Delta Armory has what you need! The P04 Vanguard EU17 Gas Blowback Pistol is rocking a super-grippy initiation hand-stippled grip, custom slide based on real steel ZEV pistols and light-enhancing iron sights, giving it styling to match the most sought-after sidearms out there.

The P04 is also kitted out with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight, opening up the potential to run it as a primary for CQB. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

As practical and combat-ready as a plain Jane EU series but with enhancements which assist handling and all the essential features a sidearm needs, the P04 Vanguard EU17 Gas Blowback Pistol is a fine choice and a big step up from more basic alternatives!

If you're not the type to customise your pistol but still want a custom look, Delta Armory has what you need! The P04 Vanguard EU17 Gas Blowback Pistol is rocking a super-grippy initiation hand-stippled grip, custom slide based on real steel ZEV pistols and light-enhancing iron sights, giving it styling to match the most sought-after sidearms out there.

The P04 is also kitted out with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight, opening up the potential to run it as a primary for CQB. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

As practical and combat-ready as a plain Jane EU series but with enhancements which assist handling and all the essential features a sidearm needs, the P04 Vanguard EU17 Gas Blowback Pistol is a fine choice and a big step up from more basic alternatives!

If you're into super-slick modern styling with a sneaky edge, the Delta Armory R15 FREYA™ Gen.2 Silent Ops DMR M4/AR-15 AEG should be right up your street! An innovative hybrid of the FREYA Gen.2 skeletonised receiver and internals with the Silent Ops DMR front end, this beast marries stealth and speed, resulting in a unique build which handles fantastically in-game.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're a FREYA™ fan but prefer covert styling, the Delta Armory R15 FREYA™ Gen.2 Silent Ops DMR M4/AR-15 AEG is the one to go for! With GrandPower Firearms licencing, a uniquely modern receiver design and both KeyMod and 20mm Picatinny interfaces ready for accessories, the FREYA™ Silent Ops DMR is an impressive combination of two of Delta's most popular designs!

If you're a Delta Armory fan, this patch is the best way to show your brand allegiance! Constructed from TPU with a Velcro backing, the Delta Armory Flaming Shield TPU Patch; Limited Edition is a free-form patch measuring 10cm x 8cm approximately.

This is a limited edition patch available in relatively small numbers, and when they are gone, they are gone. If you like the look of this unique reflective patch, grab one before they're gone for good!

This patch can be attached to any female velcro surface on bags, hats, helmets and rigs, but is also the perfect addition to any patch collector's patch wall. Showcasing Delta Armory's shield and crossed swords crest with impressive detail and some vibrant flames to spice things up, the Flaming Shield TPU Patch; Limited Edition is essential for any Delta Armory fan!

If your pistol tastes dictate the elite look, the Delta Armory P02 EU17 Gas Blowback Pistol belongs on your belt! This full metal EU-series GBB pistol is uniquely stylish, designed to imitate real-world customised pistols designed for tactical and competitive shooting. The P02 boasts Delta's unique imitation hand-stippled frame and a super-slick SAI style slide, mimicking the "Tier One" pistol, one of the trendsetters in the world of custom EU-series pistols.

The P02 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you prefer a pistol which telegraphs its customised nature discretely, the Delta Armory P02 EU17 Gas Blowback Pistol is the one for you. Supplied in a polymer hard pistol case with wave foam internals, the P02 is professional and sporty in equal measure!