All Airsoft Assault Rifles

If you're just getting started on your Airsoft journey and don't want to get in too deep straight away, the CYMA CM.517 M4 Combat Machine AEG is a fine choice. This battery-powered Airsoft AEG is constructed almost entirely from high-density ABS polymer with an alloy outer barrel and alloy version 2 gearbox, keeping the build lightweight and agile, not to mention cost-effective. While it weighs practically nothing (only 1.7kg!), the CM.517 doesn't feel flimsy thanks to its use of high-density ABS polymer. Inside we are treated to surprisingly well-equipped internals, offering respectable performance in both outdoor and indoor skirmishes.

The alloy version 2 gearbox the CM.517 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.517 is absolutely mission-ready, equipped with a 20mm Picatinny quad rail handguard and 20mm railed receiver, ready for any 20mm Picatinny accessories you need, from red dot sights and scopes to vertical foregrips, laser aiming modules and tactical flashlights. The alloy outer barrel is rocking 14mm CCW male threads, meaning you can add a tracer unit to make your BBs glow or a suppressor for sneaky styling. If you're ready to get into the sport with an affordable, reliable and competitive platform for a great price, the CYMA CM.517 M4 Combat Machine AEG is a fantastic choice!

If you're just starting your Airsoft journey and looking for an affordable lightweight polymer build M4/AR-15 AEG with programmable fire controls, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

The internals of the DA-C05-EGL are similar to the original CHARLIE™ series, but the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced primary, for an entry-level price!

For those seeking a lightweight, yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is one to watch!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK16 SCAR-L replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-L. Externally, this SCAR-L is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-L into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET will do the trick!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

If you are working on your Special Forces loadout but you haven't had time to hit the gym, Delta Armory has the MK18 for you! The DA-B15-ETU BRAVO™ is styled to match the real MK18 MOD.1 rifle issued to US Navy SEALs and Delta Force but is far lighter and handier than full metal versions thanks to its combination of a CNC aluminium handguard and alloy outer barrel with a high density polymer receiver and buffer tube. 

Inside, this MK18 MOD.1 is rather special, being fully upgraded internally with little room for more. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response. If you want the looks of the MK18 without the weight, the DA-B15-ETU BRAVO™ brings the MK18 styling along with incredible performance!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you've been checking out MK18 MOD.1 AEG platforms, the Delta Armory DA-A07-ETU ALPHA™ MK18 MOD.1 M4/AR-15 AEG is yet another fantastic option to weigh up. This MK18 MOD.1 AEG adds an enhanced receiver to the Milspec MK18 mix, providing a tasty combination of a proven design with extra consideration given to ergonomics and handling.

Being an AEG of the ALPHA™ line, this beast boasts full metal construction and the best internals Delta Armory has to offer, including the impressive programmable MOSFET/ETU system. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The ETU expands on these superb internals by allowing for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response.

If a MK18 MOD.1 will be your next buy, you have one heck of a decision to make! If you like advanced internals to go with the MK18 aesthetic, you cannot go wrong with the DA-A07-ETU ALPHA™ from Delta Armory!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're a CQB skirmisher and are looking for a new compact AR platform with a ton of nifty features all for a relatively low price, then the DA-B18-EGL BRAVO™ has you covered! This PDW-style AEG comes with a CNC aluminium handguard and a high-density polymer receiver. And of course, the star of the show, the EAGLE™ MOSFET! This ETU allows you to program your preferred firing such as burst modes, binary trigger and an AUG mode.

This AR is equipped with an M-LOK handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out on the inside with a rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate, a 6.03mm tightbore inner barrel and the EAGLE™ programmable MOSFET.

The compact nature of this AEG means that the PDW stock and buffer tube can only accommodate smaller batteries. We at Patrol Base recommend the Specna Arms 7.4V 600mAh 20/40C Battery for PDW as it is specifically designed for PDW-style assault rifles. If you want an advanced compact platform that is perfect for running around in a CQB skirmish, then the DA-B18-EGL BRAVO™ TALOS 3 PDW M4/AR-15 AEG is the one to choose!

If you're into modern military firearms, you'll love the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG! Inspired by the real steel L403A1/KS-1 recently issued to the Royal Marines, the DA-C09-EGL is a slightly shorter variant closer in length to the KS-3, though at a glance, it makes the perfect stand-in for the L403A1. On the outside, the DA-C09-EGL is made primarily from high density polymer with an M-LOK handguard, 14mm CCW threaded barrel and 20mm Picatinny railed receiver, ready to be kitted out!

While the DA-C09-EGL is similarly equipped internally to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price.

Also inside the DA-C09-EGL is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism.

Looking for something that stands out from the crowd of M4s and AKs? Here we have a rifle for those of a discerning taste. The LK58 from JG is a close replica of the real world FAL, a rifle that is often considered the western equivalent of the AK47, due to its widespread use throughout NATO during the cold war. The LK58 is modeled after the American civilian tactical FAL, the SA58, and has all the classic FAL features with a sprinkle of modernity for convenience.

An Airsoft Electronic 6mm BB Gun, based on the AK74 with more Tactical and Modern Features than the standard design and features G&G's new ETU and MOSFET Control System.

An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from Alloy, featuring an alloy Receiver, Stock Tube, Hand Guard and Barrel, with a Polymer Pistol Grip, Magazine and Stock.

If you have been laced up in CQB recently, the chances are the user was sporting this or something similar! The Firehawk from G&G Airsoft is a lightweight Airsoft AEG designed to be ultra-compact and loud, providing an intimidating muzzle report and excellent rate of fire, helping you dominate theCQB battlefield!

If you like the iconic M4A1 shape but want more ergonomic furniture, the Delta Armory DA-B02 BRAVO™ RIS M4/AR-15 AEG should suit you perfectly! The DA-B02 is based on the real steel US Army-issued M4A1 rifle but is rocking the Delta Armory modernised receiver, Delta battery stock and "gunfighter mod.3" style ergonomic pistol grip, giving it a touch of modern comfort to go with its classic militant aesthetic.

Being an AEG of the Delta Armory BRAVO™ line, the DA-B02 combines the high-density polymer receiver and buffer tube of the CHARLIE™ line with a CNC aluminium handguard and alloy outer barrel. This gives the platform more realistic weight distribution and an extra hint of realism without compromising the platform's agility.

Internally, the DA-B02 is well equipped with pre-upgraded internals focused on longevity and reliability straight out of the box. These include a reinforced gearbox shell, a piston with a full steel tooth rack and tappet plate from SHS and a quick change ball-bearing spring guide. A 6.03mm tightbore inner barrel paired with a rotary HOP-up unit is also present, intended to enhance long-range effectiveness and accuracy potential. Whether you're putting together a casual US Army-style loadout or need a lightweight platform to improve your in game agility, the DA-B02 BRAVO™ RIS M4/AR-15 AEG makes a fine primary!

If you have your sights set on an M4/AR-15 AEG with plenty of accessory options in the perfect length for both indoor and outdoor skirmishes, the DA-B11 BRAVO™ from Delta Armory is a solid choice. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Externally, the DA-B11 boasts a great combination of 20mm Picatinny rails and M-LOK negative space attachment slots, giving you access to prolific 20mm Picatinny attachments as well as the latest bits for M-LOK systems. The barrel is 14.5 inches long, giving you a great mid-length platform ideal for a mix of CQB and outdoor scenarios. At the rear, we are treated to the superb Delta Armory battery stock, a comfortable and well-designed stock with built-in sling points and a decent-sized battery compartment ideal for LiPo batteries.

Inside the DA-B11, we are treated to some thoughtful internal upgrades to extend the platform's lifespan and enhance performance. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, the steel 18:1 gearset runs on 7mm ball-bearing bushings and SHS provides the piston and tappet plate, a brand known for hard-wearing upgrade parts. Whether this will be your first AEG or a backup to a heavier full metal primary, you can't go wrong with the Delta Armory DA-B11!

If you are looking for a base gun for your dream custom AR or you like the classic look, the Delta Armory DA-C01 CHARLIE™ M4A1 is what you need. This M4/AR-15 AEG is styled after the original M4A1 rifle of the 1990s but with some 21st-century ergonomic enhancements to improve handling and a styled-up Delta Armory receiver matching modern real steel "billet" receivers.

Being a replica of the Delta Armory CHARLIE™ line, the DA-C01 is constructed primarily from high density polymer with alloy trim parts and is kitted out on the inside with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide.

With more pre-upgraded internals than a platform this price deserves and some stylish, modern enhancements, the DA-C01 would make a fine basis for a custom build but can also be left as it is to take advantage of some interesting old-school features!

If you like your M4 AEGs simple and effective, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is perfect for you! Based on the real steel M4A1 in the shorter CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle most long-range threats while not being too long that close-quarters combat becomes impossible.

 On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 base platform a slight facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics and a shorter barrel length, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is the best choice!

If you're in search of an M-LOK-equipped AR AEG packed with pre-upgraded parts, the Delta Armory DA-B13-ETU BRAVO™ M4/AR-15 M-LOK AEG is one to watch. Like Delta's other BRAVO™ like offerings, the DA-B13-ETU boasts a CNC aluminium handguard and high density polymer receiver, giving you a great combination of realism and low weight. The handguard is rocking M-LOK slots at the 3, 6 & 9 o'clock positions and a 20mm Picatinny rail up top, ready for whatever accessories you need to complete your mission.

Delta's ETU AEGs are even more upgraded than the standard BRAVO™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. These pre-upgraded internals give the DA-B13-ETU a super snappy trigger response and raised rate of fire from the combination of improved efficiency via the ETU and faster mechanical cycling via the high-speed gearset.

If you need a handy platform with beastly internals at the perfect length for aggressive, fast-moving playstyles, the DA-B13-ETU from Delta Armory will be an asset to your game!

An exceptional value-for-money Airsoft Electric Gun that offers great features like a Quick Change Spring, Microswitch Trigger, Fully Ambidextrous Controls and Steel Gears. If you're new to the sport or you're looking for a reliable backup Gun as a spare, then this replica will appeal greatly. With fully Ambidextrous Fire Controls, this is also a strong choice for Left Handed Players.

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat.

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted.

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

If you don't like to waste energy lugging a full metal platform around but want high performance, pre-upgraded internals, the Delta Armory CHARLIE™ ETU range was conceived with you in mind. This is the DA-C04-ETU M4/AR-15 KeyMod AEG, based externally on the original DA-C04 but kitted out internally with Delta's APLHA™ ETU internals.

Inside, we are treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The Delta Armory programmable ETU/MOSFET system is also present, offering super snappy trigger response, improved rate of fire and the ability to program the fire controls for burst mode and binary trigger. Whether you're new to skirmishing and want a pre-upgraded platform that can tangle with the best, or you're a veteran who likes to fight easy, the DA-C04-ETU CHARLIE™ M4/AR-15 KeyMod AEG is the ideal addition to your Airsoft armoury!

If you dream of a beastly DMR build but don't want the hassle of building one yourself, the Bolster Tuned EMG Daniel Defense M4A1 RIII™ DMR Upgraded AEG is your best option! Based on the already impressive EMG Daniel Defense M4A1 RIII™ 14.5" AEG but ram-packed full of upgrade parts and tuned to absolute perfection, the Bolster Tuned M4A1 RIII™ is locked to semi-automatic and hits out at an impressive 410 FPS with a 0.2g BB, ready for DMR duty!

On the outside, the EMG M4A1 RIII™ is practically the perfect DMR base gun, with enough length for the DMR look paired with a light and agile RIS III M-LOK handguard, ergonomic Daniel Defense Buttstock and gorgeous licenced Daniel Defense trademarks. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for upgraded builds with high performance parameters.

Inside, you'll find a Gate ASTER™ MOSFET paired with the Gate QUANTUM™ CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan and an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding and the strength to handle the high power main spring.

To get your BBs way out there and onto target, a Tru-Hop Gen.3 HOP-up bucking paired with a Maple Leaf OMEGA nub was installed, giving you impressive accuracy for a high first-round-hit probability. The Warhead 45K Base Brushless Motor and a Laylax EG 18:1 Hard Gear Set provides the durability, torque and heat dissipation qualities for peak efficiency, shocking trigger response and a long lifespan of reliable performance.

With a scary-fast trigger response, exceptional range and the ability to hit small targets out to 60 meters and beyond, this isn't just a high FPS platform locked to semi; each and every Bolster Tuned M4A1 RIII™ DMR is hand-assembled, tuned to perfection and put through rigorous testing on our 65m range. If it doesn't meet the Bolster standard, it doesn't leave the workbench until it does!

Whether you're new to the game and looking to start out with a full metal platform bristling with advanced features or a veteran skirmisher in search of an M4 AEG you can just pick up and go with, the Delta Armory DA-A06 ALPHA™ KeyMod 10" M4/AR-15 AEG is a fine choice. A realistically hefty full metal build with a cutting-edge aesthetic at just the right length to do its dirty work both outdoors and in CQB, the DA-A06 ALPHA™ is ready for any challenge that faces it. 

Equipped with a KeyMod handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out with SHS reinforced parts and a 6.03mm tightbore inner barrel the DA-A06 ALPHA™ is an extremely competitive platform, both on price and performance!

If you're after a new M4 AEG but don't like to commit to a particular build direction, the DA-A06 won't make any decisions for you! Thanks to the modularity of the AR platform and the DA-A06 ALPHA™ 10" KeyMod M4/AR-15 AEG is ready to accept a full complement of accessories, kitted out just how you desire and give the enemy team the what for when it comes to skirmish day!

If you're in search of a new CQB platform or a compact PDW-style AR for your quick and slick playstyle, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG should be high on your list of options. This full-metal M4 platform boasts an extremely compact front end, ideal for close-quarters skirmishes or woodland warriors who prefer to move fast with a bite-sized M4 with full-sized firepower. 

Being an AEG of the ALPHA™ range, this beast boasts pre-upgraded internals and a high-quality metal receiver paired with a  CNC aluminium handguard and micro suppressor. Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness despite its short overall length. 

If your aim is to refute the "size matters" philosophy and prove it truly is how you use it, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG is the perfect AEG to do it!

If a full metal AR PDW will be your next buy, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG definately deserves your attention! Rocking full metal ALPHA™ standard externals on the outside and some seriously slick technology internally, the TALOS 1 is a mean CQB machine ideal for cutting tight corners up close and personal. 

Inside, the TALOS 1 is equipped with Delta's EAGLE™ programmable MOSFET/ETU, offering a boost in trigger response and rate of fire along with programmable fire controls. Available fire modes include 3 or 5-round burst mode, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you almost too many options all of which can be programmed using the fire controls of the AEG itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the TALOS 1 far more long-range effect on target than one might expect!

Whether you specialise in CQB or prefer a short platform for aggressive outdoor play, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG will be an asset to your battlefield role. Dressed to impress on the outside with all the latest attachment interfaces, the TALOS 1 is a force to contend with; kit it out and get busy!