Specna Arms Airsoft

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're after affordable heavy-weight BBs, Specna Arms ONE 0.30g 6mm BIO BBs are a fantastic option. Supplied in a resealable bag containing 1000 BBs approximately, these BBs are made from biodegradable materials, making them great for outdoor target shooting and skirmishing alike.

These slightly heavier than standard BBs provide improved foliage penetration ability and wind resistance along with extended range in guns with upgraded HOP-ups. If you're trying to feed an ammo-hungry LMG without emptying your wallet, Specna Arms ONE 0.30g 6mm BIO BBs are a great way to do it!

Now Specna Arms has joined the AR-9 gang! Introducing the SA-X02 EDGE 2.0™ AR-9, Specna Arms' attempt to dethrone the legendary ARP9. The SA-X02 boasts full metal construction, ambidextrous controls and the superb Specna Arms ORION™ gearbox made all the better with a high torque motor and the game-changing Gate ASTER MOSFET.

On the outside, the SA-X02 boasts a totally unique look, with an officially licenced Strike Industries M-LOK handguard, a modern "billet" style receiver with weight-reducing cuts and an ergonomic pistol grip with a reduced grip angle which pairs perfectly with its compact PDW stock. If you are looking for an AR-9 which doesn't look like everyone else's and brings some seriously impressive performance to the table, the SA-X02 would be a great addition to your arsenal!

An Airsoft electric rifle made from Zinc Aluminium and Steel, with a wealth of up-rated internal parts to make a rifle that shoots as great as it looks. Part of Specna's EDGE series, this rifle features an X-ASR MOSFET and quick change spring system as standard.

Infinitely functional and incredibly comfortable, the Specna Arms Heavy Ops Stock for M4/AR-15 Platforms offers modern looks, an ergonomic shape and a massive internal battery compartment. Although branded as 'Heavy Ops', this stock is anything but, being constructed from lightweight yet strong high-density polymer to keep your setup light, agile and well balanced.

The internal battery compartment can be accessed by pushing the two tabs at the toe of the stock through, after which the butt plate will pop off. Inside, you'll find a pair of generous 17 cm long battery compartments, ideal for crane/nunchuck configuration batteries.

Amongst its many ergonomic perks, the Heavy Ops Stock features rubberised cheek rests for comfort and a thick serrated butt plate made from rubber for perfect traction in any weather conditions. The adjustment lever is ambidextrous and concealed within the "A-frame" shape, preventing equipment snags and keeping you agile in the field. If you need a substantial battery compartment but seek modern aesthetics, the Specna Arms Heavy Ops Stock for M4/AR-15 Platforms covers both bases!

If you have an M-LOK handguard, but own mostly Picatinny attachments, you need these rail sections! The Specna Arms Aluminium Picatinny Rail Set for M-LOK Handguard includes 3 different lengths of rail sections so that you can customise your rifle to your heart's content. This is perfect for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments!

If you're after cheap and cheerful eye protection which doesn't compromise on quality, the Pheos One Safety Glasses from Specna Arms should be in your sights. Made by Uvex Safety and rated EN166 FT for low energy impacts, these glasses should keep your eyes safe from incoming fire, but we recommend adding a retention strap if they sit loosely on your head.

Equally useful for target shooting with an Air Rifle or working with power tools, these protective glasses are a comfortable wrap-around design with rubberised gripping sections on the arms to keep them firmly planted. Whether you're a tinkerer who wants to stay safe while dremelling or an Airsofter enthusiast seeking affordable, impact-rated glasses, Specna's Pheos One Safety Glasses are the perfect choice!

The SA-249 MK1 Core is an Electric Gun Replica of the M249 MK1 PARA Light Machinegun, which is made to be as lightweight as possible whilst still being incredibly tough, so that you can run a support role on the skirmish field without absolutely exhausting yourself. If you want an easy to use Airsoft MG, then the lightweight Polymer/Alloy construction, Micro-switchTrigger Unit, Quick Change Spring and Alloy Rotary HOP will be very appealing to you.

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you fancy customising your M4 AEG or enhancing its handling, the Specna Arms M-416 Pistol Grip for M4/AR-15 AEGs is a fantastic, affordable option. Made from robust high-density polymer with a design inspired by the real steel M-416 rifle, this pistol grip is far more comfortable than most and adds the elite look to your primary as a bonus!

Compatibility-wise, this grip should fit on most M4/AR-15 AEGs but will require some expertise to install. If you want to freshen up the look of your setup or your current pistol grip doesn't work for you, the Specna Arms M-416 Pistol Grip for M4/AR-15 AEGs is worth a shot!

If you need more 20mm Picatinny rail space than you've had hot dinners, you need the Specna Arms CNC 10” 20mm Picatinny RIS Handguard for M4/AR-15! This piece is constructed from CNC aluminium, meaning it has tight tolerances, is high-quality, and surprisingly durable!

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't contact the outer barrel, so there is no force applied to the handguard, negatively affecting accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though it should fit the vast majority of M4/AR-15 AEG and GBBR platforms.

If you've lost a body pin in the field, the Specna Arms Body Pin Set for M4/AR-15 AEGs is what you need to make it right. This set includes front and rear screw-secured receiver pins and a trigger/gearbox pin, all constructed from alloy. The perk of screw secured pins is that, unlike standard friction-fitted pins, they'll never slide out in the field, provided you tighten them down and regularly ensure they're still firm.

Compatibility-wise, these pins are designed for Specna Arms M4/AR-15 AEG replicas but may also work with other brands. We advise proceeding with caution when installing these pins, especially in non-Specna receivers. When working with Airsoft externals, use as little force as possible to get the job done and avoid hammering them in like a caveman!

If you're kitting out your M-LOK handguard, the Specna Arms SAAS M-LOK Angular Front Grip is a solid foregrip option! Made from lightweight aluminium, this innovative foregrip includes a built-in QD sling socket on the rear facing the shooter, saving space to make your M-LOK slots go that bit further!

The contact surface of the SAAS Angular Front Grip is serrated for maximum traction in any weather conditions and includes an integral hand stop to prevent your hand from going past the handguard and into the danger zone. If you're after an angled foregrip for M-LOK and you also need a QD sling point, the Specna Arms SAAS M-LOK Angular Front Grip is your perfect combination!

If you need more stability when shooting from a static position, the Specna Arms Adjustable Telescopic Bipod for 20mm Picatinny Rail will assist! The bipod is predominantly made from alloy, with certain steel parts for strength. The bipod legs can be collapsed and extended by turning the knurled section on each, catering to a wide variety of platforms, terrain and uses.

The bipod is constructed from Alloy, with Rubber feet to prevent slipping on wet surfaces. The bipod mounts to 20mm Picatinny rails using an integral rail mount which can be tightened either by hand or using a large flat-headed screwdriver to secure. The legs can be folded up and down for transport using the catch on each, keeping your setup portable for when you need to relocate (fancy word for legging it). If you're running a hefty DMR or sniper rifle setup, use this Bipod to get more accurate shots from a supported position!

If you need more stability when shooting from a static position, the Specna Arms Adjustable Telescopic Bipod for 20mm Picatinny Rail will assist! The bipod is predominantly made from alloy, with certain steel parts for strength. The bipod legs can be collapsed and extended by turning the knurled section on each, catering to a wide variety of platforms, terrain and uses.

The bipod is constructed from Alloy, with Rubber feet to prevent slipping on wet surfaces. The bipod mounts to 20mm Picatinny rails using an integral rail mount which can be tightened either by hand or using a large flat-headed screwdriver to secure. The legs can be folded up and down for transport using the catch on each, keeping your setup portable for when you need to relocate (fancy word for legging it). If you're running a hefty DMR or sniper rifle setup, use this Bipod to get more accurate shots from a supported position!

Need more stability for long-range shots? The Specna Arms Spring Loaded Bipod for Harris Lug will do the trick! Designed to mount to a Harris-style sling/bipod Lug by twisting the thumbscrew on the base so that a pair of 'pincers' will grab onto the Lug, then tightening it down for a firm fit, this bipod is ideal for milsim sniper rifle setups!

The Bipod has spring-loaded legs which can be extended to full length by pressing the button for each leg. Once deployed, you can adjust them between 6 different levels of extension. Each leg can be adjusted independently, allowing you to set your rifle up on uneven ground. When not in use, you can easily fold the legs back into place by hand, with no fiddly catches to defeat while you're pumped with adrenaline. The Rubber Feet on the bottom of each Leg make any Rifle stable when used on flat ground, and will provide ample grip and stability.

The Spring Loaded Bipod for Harris Lug mounts to Harris sling/bipod lugs, which are present on many Airsoft sniper rifle replicas, including most M40A1, M24 and VSR-10 replicas. If you're rocking one of these rifles and want to make it look the business while improving stability when shooting from static positions, the Specna Arms Spring Loaded Bipod for Harris Lug belongs on board!

If you've had a mishap with your Specna Arms SA-H EDGE 2.0 AEG, this might be the part you've been searching for! The Specna Arms Lower Receiver for SA-H Series EDGE 2.0 AEGs is an original replacement part made from alloy, a stripped lower receiver ideal for replacing a cracked, damaged or broken lower.

The set includes a pre-installed fire selector switch and trigger guard but doesn't include body pins or other trim parts. Bring your EDGE 2.0 back to life with the Lower Receiver for SA-H Series EDGE 2.0 AEGs from Specna Arms!

If you're an AK kinda guy but want to stay light on your feet, the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG is your ideal primary! A revamped version of the original SA-J73, the HAL¹ ETU version keeps the best bits and adds some innovative new parts into the mix, with the HAL¹ programmable MOSFET taking centre stage.

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Also added to the updated SA-J73 is a new rotary AK HOP-up unit design, bringing rotary performance to the table to keep pace with ARs! Like the original SA-J73, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

If you're an operator on a budget and need an agile AK with advanced internals, the SA-J73 is exactly that. Rock solid despite its polymer build and kitted out on the inside with goodies you'd never expect at this price, you're in good hands on the field with the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG at your side!

If you're looking for a modern AR platform packed with pre-upgraded parts, the Specna Arms SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG is exactly that. A high-quality full metal build on the outside with a sleek M-LOK handguard, 20mm Picatinny railed receiver and Specna Arms SAAS angled foregrip pre-installed, the SA-P22 is equally impressive on the inside, equipped with Specna's top-of-the-range internals, which are even better than the previous EDGE 2.0 lineup!

The PRIME™ range is Specna's newest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're not the type to delve into Airsoft internals but you still want top tier performance, Specna's PRIME™ range was made with you in mind. With a brushless motor, programmable MOSFET, upgraded HOP-up unit and stainless steel tightbore under the hood, you'll never need to upgrade SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG!

If you're looking for a modern AR platform packed with pre-upgraded parts, the Specna Arms SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG is exactly that. A high-quality full metal build on the outside with a sleek M-LOK handguard, 20mm Picatinny railed receiver and Specna Arms SAAS angled foregrip pre-installed, the SA-P22 is equally impressive on the inside, equipped with Specna's top-of-the-range internals, which are even better than the previous EDGE 2.0 lineup!

The PRIME™ range is Specna's newest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're not the type to delve into Airsoft internals but you still want top tier performance, Specna's PRIME™ range was made with you in mind. With a brushless motor, programmable MOSFET, upgraded HOP-up unit and stainless steel tightbore under the hood, you'll never need to upgrade SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG!

If you're running the SA-F249 and keep running out of rounds, this should help! The Specna Arms 1500rnd Electric Box Magazine for SA-F249 AEGs is an electrically powered auto-winding magazine, boasting a whopping 1500 BB capacity loaded through the fill window on the left side of the magazine body.

This mag requires 2 AA batteries to function (not included), which are installed through the bottom of the bag by unzipping the fabric cover and popping open the battery compartment inside. Also inside the fabric cover is the activation switch, offering both "Sound Control" and "Auto" modes. Using sound control, the magazine will wind as the internal sensors detect shooting. The "Auto" mode is ideal for priming the magazine after insertion and adding extra tension in the event of misfeeds.

Compatibility-wise, this mag is designed for the SA-F249 FLEX™ but may work in other M249 AEGs, though we can't guarantee it. If you're running the featherweight SA-F249 and need to put more rounds down range, the Specna Arms 1500rnd Electric Box Magazine for SA-F249 AEGs will do the trick!

If you're in search of a long AR to complete your outdoor loadout, the Specna Arms SA-V30 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is a fine choice. Boasting the top-notch build quality Specna's ONE™ series has become known for, this is the updated version, fitted with the superb EShooter Kestrel Basic ETU/MOSFET.

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking with 6 levels to choose from and several quality-of-life functions such as low battery warning and cycle completion. The result is a remarkably snappy trigger when pre-cocking is set, the perfect feature for someone who needs fire supremacy in CQB to get the job done! Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you superb accuracy potential and the latest HOP-up design for M4/AR-15 platforms.

The Specna Arms SA-V30 ONE™ is a full-length M4 platform with a 15-inch outer barrel and a steel 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, making it a beast outdoors, and with the right upgrades, a DMR capable of dominating any firefight. Its super-light aluminium handguard gives you plenty of space for a nice C-clamp grip, making it easy to steer between targets at an impressive pace. No matter what you plan to do with it, this Specna Arms SA-V30 is a great addition to your armoury!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Need a battery and a charger for your upgraded AEG? Get both at once with the Specna Arms Set EASY Charger With an 11.1v 1000mAh Battery! This package has everything you need to get started with 11.1V batteries. The balance charger ensures that all your battery's cells are charged equally, it also works for 7.4V batteries.

11.1V batteries should only be used with upgraded platforms, the high voltage and discharge rate can cause excess wear on internal parts inside stock AEGs. However, if your Airsoft rifle is built to take 11.1V batteries you will notice an improved rate of fire, snappier trigger response and possibly even an increase in FPS.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.