Airsoft Electric Submachine Guns

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

An Airsoft 6mm replica SMG-5 SD6, manufactured by Jing Gong. Comes supplied with an integrated suppressor for looks and to slightly dampen muzzle report.

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

The JG M5 SD5 is an integrally suppressed SMG-5 AEG featuring a polymer body and full sized battery stock. A very popular style of Airsoft rifle due to its widespread use by sneaky types of many militaries, great for some discrete CQB kills! 

There has been a lot of fuss made about this particular AEG online, and let us tell you, the hype is real! The Krytac P90 AEG combines the P90s radical design with Krytac's industry expertise to produce the best performing P90 out there, with an unrivalled feature set and bomb-proof internals.

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

Now Specna Arms has joined the AR-9 gang! Introducing the SA-X02 EDGE 2.0™ AR-9, Specna Arms' attempt to dethrone the legendary ARP9. The SA-X02 boasts full metal construction, ambidextrous controls and the superb Specna Arms ORION™ gearbox made all the better with a high torque motor and the game-changing Gate ASTER MOSFET.

On the outside, the SA-X02 boasts a totally unique look, with an officially licenced Strike Industries M-LOK handguard, a modern "billet" style receiver with weight-reducing cuts and an ergonomic pistol grip with a reduced grip angle which pairs perfectly with its compact PDW stock. If you are looking for an AR-9 which doesn't look like everyone else's and brings some seriously impressive performance to the table, the SA-X02 would be a great addition to your arsenal!

An Airsoft electric powered 6mm SMG-5K replica with a full metal construction; the best friend to any close protection worker, movie bad guy, SAS operative or secret agent on skis!

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

For a machine pistol it doesn't get more compact than this! 

Perfect for those tightly spaced CQB environments. Used in such Hollywood films such as Taken and Air Force One, this iconic SMG is instantly recognisable and makes for a great Airsoft replica.

This variant comes with a quad 20mm RIS / RAS rail on the front handguard with the top rail extending along the length of the top of the gun, so you can customise to your hearts content with a variety of accessories.

With full metal construction, this replica has a realistic feel to it and is a great choice for beginner and veteran Airsofters alike.

If you are looking for something modern, compact and unique with which to turn and burn in CQB the SigAir MPX AEG would be a superb choice. This mould-breaking new SMG is a near-perfect replica of the real Sig MPX, the 9mm SMG offspring of the legendary MCX carbine. 

The SigAir MPX is built like a tank, sporting full metal construction and precision CNC machining across its externals and flawlessly realistic SIG trademarks, and is pre-wired with a basic MOSFET to keep its trigger contacts protected as you lay down rapid semi-auto shots in CQB, in the MPX’s natural habitat.

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Bucking was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

The tactical option for MP5 lovers far and wide; whether you want to attach the included foregrip or your own optics, torches, lasers this Airsoft 6mm electric powered replica has you covered.

Offering you the best of both worlds, the SRC SR4 ST Falcon-ZS lets you choose between using SR4 AR9 and M4 STANAG AEG magazines by using the handy included receiver adapter. Its lightweight and compact design makes the Falcon perfect for run-and-gun CQB playstyles.

With an integrated suppressor and PDW stock for that operator style, the Falcon boasts a wealth of other features such as M-LOK front handguard, 20mm top rail and flip-up ironsights, 280 round 9mm magazine, as well as a removable magwell grip, the Falcon has a lot to love in a compact package.

Finally released, the highly anticipated QRF Mod.2 is a pistol calibre style AR replica built by KWA to the highest of standards, with an excellent build quality, finish, and wide range of features to make this an absolute beast of an Airsoft Gun. This variant of the QRF features straight g-series style magazines, and a flat style stock butt plate. The replica even comes with upgraded externals right out of the box, with a high quality PTS Syndicate removable flip-up iron sight pair and PTS polymer pistol grip.

This Airsoft AEG features a range of features designed to make it dominate in CQB environments, but is also performs great outdoors as well. With a short compact design the replica features a sliding PDW style stock allowing you to take corners more aggressively without the fear of snagging for tighter more consistent game play.

This replica is perfect for those Airsoft skirmishers who are looking for a pistol calibre AR, or for those who need a gun for tight CQB engagements.

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

This MK7 Sterling is a replica of the rare Para-pistol SMG. It is a variation of the Sterling Submachine Guns that was produced for only 18 months from 1986 to 1988. This SMG was designed to provide paratroopers and non-infantry personnel with an automatic compact alternative to their pistols. The Airsoft replica doesn't quite have the same decorated history, but it looks just as stunning and would be a fine addition to any old military replica collection or wartime reenactor's arsenal.

Constructed almost entirely from steel with all the features one would expect from an authentic Sterling replica, the S&T MK7 Sterling is built like a tank, with the appropriate weight and heft for a realistic experience whether you're skirmishing with it or just fondling it at home (we don't judge!). Inside, we have a unique gearbox type with an alloy shell, caged motor and 18:1 ratio steel gears, with a well-concealed rotary adjustable HOP-up unit on the underside of the outer barrel. If you're looking for an old-school rare SMG or are working on your historic British firearms collection, you need the S&T MK7 Sterling!

If you love a bit of unique old-school cool, the Bolster Tuned CYMA CM.058 PP-19 Bizon SMG AEG should be in your sights! Based on the CYMA CM.058 Bizon, this rare Russian SMG replica is a sight to behold with its distinctive cylindrical magazine, side-folding skeleton stock and menacing trumpet flash hider, but inside, things get even better!

Like the more conventional Bolster Tuned CM.113 AKS-74U, the Bizon is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings to keep it running reliably long term. Replacing the copper trigger contacts, we have the space-aged Gate ASTER II™ ETU, the ASTER II boasts several quality of life improvements, more customisation options than ever before and Bluetooth 5.2 connectivity built-in, allowing you to change settings wirelessly on your smartphone or mobile device.

The HOP-up has been enhanced with a Delta Armory BERSERKER Flat Hop-Up Bucking to extend the range out to 60 meters and beyond with astonishing accuracy. To give it the insane rare of fire Bolster Tuned AEGs are known for, the team fitted CYMA Platinum 13:1 CNC High-speed gears, and the result is an incredible 27 rounds per second. A Guarder Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and the sub-par stock piston head O-ring has been replaced with the Bolster Armouries Enhanced Piston Head O-Ring to enhance air-seal qualities for minimal FPS deviation between shots. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put into refining the mass-produced CYMA gearbox and making it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts. The bearing holes have also been smoothed out to reduce friction and prolong lifespan. The angle of engagement has also been corrected using the Bolster Armouries AOE Correction Washer, meaning 11.1V LiPo's are a go for the Tuned CM.058, precisely what a proper PP-19 Bizon replica needs!

A respectable AEG in its original form, the CM.058 really shines with some expert custom fitting and choice upgraded parts. If you always fancied running a perfectly tuned SMG with a head-turning look, the Bolster Tuned CYMA CM.058 PP-19 Bizon SMG AEG ticks all the boxes!

The bringer of death makes an unexpected return! The OBIRE 2.0 Advanced PCC AEG marries dynamic, brooding styling with hand-tuned high-end internals, assembled with care by some of the most talented technicians in the industry. The proven pedigree of Bolster Armouries continues to amaze both end users and those downrange, landing consistent hits at 60 meters and beyond with an incredible rate of fire of 28 rounds per second. While the bar to entry is high financially, the performance you'll experience with a Bolster Armouries at your side is second to none.

Working with the SigAir MPX AEG as a starting point with the ultra-slick 3-Gun style Task Force Carbine Kit and Genuine MFT Battlelink Minimalist stock added, the OBIRE 2.0 has been externally and internally overhauled in true Bolster Armouries tradition. Almost none of the original internal parts remain inside; everything found to be suboptimal has been ripped out and replaced with high-end aftermarket parts from Gate Electronics, Laylax/Prometheus, RetroArms, Warhead Industries, Maple Leaf and FPS Softair. All parts are chosen after an extensive R&D process and tuned to perfection by the exacting techs of Bolster Armouries who simply cannot let anything less than perfection leave the workbench.

Standing on the shoulders of Airsoft giants such as the highly successful Bolster Armouries ONYX, ARKOSE, ATLAS, AEGIS and the original OBIRE AEGs, each OBIRE 2.0 platform is hand-assembled by the truly talented and dedicated Bolster Armouries technicians and tuned to perfection, providing the absolute pinnacle of Airsoft gun performance straight out of the box.

The Bolster Armouries dedicated after-sales service package supplied with each Bolster AEG has you covered for 24 months from the date of purchase, meaning the incredible performance standard set by the OBIRE 2.0 when you take your first shot is guaranteed to be maintained in the long term. If you are interested in the second generation of the slickest and quickest Bolster Armouries platform yet, the OBIRE 2.0 is ready whenever you are!

If you have caught AR-9 fever (it's contagious!) but you want something realistic, EMG has what you need! The Angstadt Arms UDP-9 is a modern AR-9 platform which is popular on the US civilian market and boasts full Angstadt Arms trademarks thanks to EMG.

This compact M4/AR15-derived submachine gun features full metal construction, a 14mm CCW male threaded outer barrel and an in-line MOSFET which pairs well with the microswitch trigger to provide a snappy response for some rapid double taps in CQB and has a nice rate of fire if you want to stretch this lil guy's legs in an outdoors setting. All of the controls are either ambidextrous or extended, making for a familiar but enhanced feel for M4 users, and its innovative compact PDW stock allows it to be pocket-sized but still make use of buffer tube style stick batteries. If you want ARP-9 like short barrel with a healthy dose of realism, the UDP-9 would be a great pick!

The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.

AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.

The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.

AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.

If you have dreams of a lightweight and compact SMG that shoots like a minigun, allow us to introduce you to the Novritsch SSR9 DSG. This phenomenal new AR-9 platform boasts an agile build combining a CNC aluminium handguard and high density polymer receiver and is rocking what is known as a Dual Sector Gear which effectively doubles the rate of fire to a phenomenal 36 rounds per second. This is the same RoF as the WELL PRO WE23-S Minigun; an incredible feat for such an affordable platform with only 1 barrel.

Speed is not the only trick up the SSR9's sleeve. The HOP-up unit is the rotary type with a numerically marked adjustment dial, kitted out with a Maple Leaf Macaron HOP-up bucking and 6.03mm tightbore inner barrel. Despite its short length and CQB optimisation, the SSR9 DSG is no slouch when it comes to long-range performance. If you like to move fast and need an AEG that can keep up, the Novritsch SSR9 DSG certainly can!

A compact and lightweight submachine gun, perfect for CQB sites or as an introductory weapon, with an instantly recognisable design, as well as rails on the top and sides for additional customisation options.