Airsoft Flashlights & Torches

A small LED powered Light designed for use as a marking device to donate Locations and Team Colours for Identification. The Body of the Light is constructed from Polymer, with a Gel encased LED Light, making it waterproof.

A small LED powered Light designed for use as a marking device to donate Locations and Team Colours for Identification. The Body of the Light is constructed from Polymer, with a Gel encased LED Light, making it waterproof.

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

If you are in need of a compact tactical flashlight for a short-barreled rifle or SMG setup an M300 pattern light is one of the best options out there. This variant, the WADSN M300 Scout Tactical Flashlight w/Diffuser Cover uses an M300 light body coupled with a specialised head with a built-in diffuser cover which can be quickly flipped out of the way when not needed.

The diffuser is designed to spread the light throw out to more effectively distract and disorient enemy players when entering a room and flipping it aside will narrow the beam for long range engagements. Being based on an M300 scout light body means you can use alternative scout light mounts, tail caps and other scout light accessories to set it up to suit you perfectly.

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

If you want to add a tactical flashlight to your Airsoft pistol, the NUPROL NX200 would be a fine choice. The NX200 is constructed from alloy, and sports a bright CREE LED with 200 Lumens output. 

The NX200 has a 20mm Picatinny rail mount built into the body, offering quick mounting and removing without the need for tools, and has a built in ambidextrous "rocker" switch, which offers both momentary and constant-on for both left and right-handed shooters. The rocker switch is placed perfectly to be activated with either the tip of your trigger finger, or your reaction hand thumb, making the NX200 remarkably intuitive to use, and easy to become proficient with. If you want to take your pistol game to the next level, the NX200 will get you there! 

Please Note: The Colour of the bronze variant has changed in our most recent batch, it is now much lighter than the images show. Please refer to the colour swatch in the "Specification" section for a more accurate representation of the new "Light Bronze" finish. Product Images will be updated shortly. 

For a more robust and thick lighting solution, the K-2P is for those of you with more Russian inclined loadouts. Constructed from full alloy, the torch shines at a brilliant 800 lumens and is powered by 2 x CR123A batteries.

The torch is easily attached to your AK rail or 20mm Picatinny system and includes a remote pressure switch, which again can be easily attached to a rail right out of the box. Another inclusion is the offset mount, which allows you to forward mount your torch on the bottom rail to avoid casting a shadow if you are using a suppressor.

If you are looking for that last small item to give your helmet/kit setup some added flair, check out the Signal light from FMA. This light can be attached to either velcro or a MOLLE rig and comes complete with a wireless charging kit, MOLLE mount, helmet mount and Velcro.

For those looking for the ultimate low profile pistol torch, stop searching! You've found it, powered by a single AAA battery you can dazzle your targets for hours without having excessive weight and bulk at the front of your Airsoft pistol.

If you want to add the elite look to your primary weapon but your local site bans lasers, the WADSN DBAL Mini style Tactical Flashlight was made with you in mind! This device is styled after the real steel DBAL Mini but instead of a laser, the device houses an ultra-bright tactical flashlight inside its front aperture.

The device offers several modes of operation, including low power mode for navigation and stroboscopic mode for distraction and disorientation, and mounts to your primary via a QD mount for 20mm Picatinny rails so you can easily switch between platforms without needing tools. The compact size of this unit makes it perfect for smaller SMGs and rifles, saving you rail space and offering similar functionality to a Scout tactical flashlight but with more modes to choose from and full compatibility with aftermarket 2.5mm pressure switches, dual pressure switches and hot buttons.

A Tail Switch unit designed to replace the existing Push button on the back of Big Dragon SF G2 Style T6 Torches. The tail switch is constructed from polymer with a Soft Rubber coated tail switch.

If you have rail space to fill and want the purebred operator look for your primary, a PEQ box is a great way to elevate the look of your rifle. This version of the WADSN PEQ15 LA-5C combines this elite look with full functionality, including a rare feature for an Airsoft PEQ; an infrared laser. This laser is only visible under night vision but can be a serious asset if you are fortunate enough to own NODs! 

In addition to the IR laser, this PEQ unit provides a white light and a red aiming laser which can be activated either using the onboard activation button or the included pressure switch. The WADSN PEQ15 LA-5C requires two CR123a cells, either standard disposable cells or rechargeable cells. 

If you have rail space to fill and want the purebred operator look for your primary, a PEQ box is a great way to elevate the look of your rifle. This version of the WADSN PEQ15 LA-5C combines this elite look with full functionality, including a rare feature for an Airsoft PEQ; an infrared laser. This laser is only visible under night vision but can be a serious asset if you are fortunate enough to own NODs! 

In addition to the IR laser, this PEQ unit provides a white light and a red aiming laser which can be activated either using the onboard activation button or the included pressure switch. The WADSN PEQ15 LA-5C requires two CR123a cells, either standard disposable cells or rechargeable cells. 

A replica PEQ-15 device from Nuprol that provides torch illumination, a visible red laser pointer and IR laser pointer - all in one compact package!

If you are the type of Airsofter who loves the latest and greatest mission essential equipment you must have been waiting for this moment! The WADSN ET OGL White Light Illuminator/Aiming Laser; Red & IR is a close replica of a well known real steel laser device and is constructed from CNC aluminium with flawless precision. 

The unit contains a 150-lumen white light illuminator, a red visible aiming laser and an infrared (IR) laser which can be used in various combinations and either with the included Crane jack pressure switch or aftermarket dual switches. Mode selection is provided by a rotary dial on the rear, and the unit requires a single CR123A 3V cell (not included) to function. If your mates are all running PEQ-15 and DBAL units and you want to make them jealous, the OGL will do just that!

If you have a small gun but a big need for illumination, or if you want the latest compact, high speed PEQ style laser unit, the DBAL-A2 from WADSN may be what you have been looking for! With more functions than the space shuttle and a compact lightweight form, you need your excuses ready to not want this on your primary!

For CQB, and for low light situations, there is no greater helping hand in the field than a tactical flashlight. The M340A Scout Light Pro from WADSN is the latest variant of their M3xx mini scout light series and comes complete with a low profile, angle adjustable mount for 20mm Picatinny rails, an angle adjustable M-LOK/KeyMod mount, and both the push button tail cap and the pressure switch tail cap. This light reportedly pumps out 540 lumens and literally turns night into day with its dazzling brightness!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you play a lot of CQB, a tactical flashlight will be an asset to your setup. The Delta Armory Defender Shield Tactical Flashlight is a highly flexible unit capable of being used as a handheld light or weapon light, packaged with a pressure switch tail cap and equipped with a push button tail cap as it comes. Also included is a 20mm Picatinny ring mount to allow you to mount it to your primary and a lanyard so you can carry it as a handheld light and avoid dropping it in wet weather.

The Defender Shield is powered by the included rechargeable18650 Lithium battery but the charger is not included. Compatible chargers can be found by putting "18650 Battery Charger" into your favourite search engine. If you're kitting out your primary for CQB or night skirmishes you need this on your primary!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

The DBAL-PL is the absolute pinnacle of pistol torches, offering the kind of functionality most Airsofters will never need, but all of them want! The DBAL-PL from WADSN provides a red aiming laser, a white LED light, and both an infrared laser and infrared illuminator all in one unit! The DBAL-PL is designed for use on pistols, but also looks awesome and functions perfectly when mounted to the lower rail of an assault rifle or submachine gun setup. If you own real NODs(lucky!) or any form of night vision and intend to use it for skirmishing, only a DBAL-PL will do it justice!

The DBAL-PL is the absolute pinnacle of pistol torches, offering the kind of functionality most Airsofters will never need, but all of them want! The DBAL-PL from WADSN provides a red aiming laser, a white LED light, and both an infrared laser and infrared illuminator all in one unit! The DBAL-PL is designed for use on pistols, but also looks awesome and functions perfectly when mounted to the lower rail of an assault rifle or submachine gun setup. If you own real NODs(lucky!) or any form of night vision and intend to use it for skirmishing, only a DBAL-PL will do it justice!

The M322 Scout Tactical Flashlight is a modern LED torch with RM45 offset mount for Picatinny 20 mm rail. This flashlight produces a fantastic 280 lumens from 1x CR123 battery, made possible due to the modern CRE2 LED bulb installed.

An advantage of this torch over similar models is that it comes with 2 switches that can be used in tandem, thank to the dual function tail cap. It features a constant on push button in addition to a lead-attached pressure switch . This means that you don't have to unscrew one to get to the other, like in some other flashlight models.

Another feature unique to this torch is the mount, in that it is an offset mount that allows it to be mounted closer to the handguard for a slick overall platform.

If you have rail space to fill and want the purebred operator look for your primary, a PEQ box is a great way to elevate the look of your rifle. The WADSN PEQ15 LA-5C comes with the added benefit that it doesn't just look really cool, it is also a functional aiming laser and tactical flashlight! This PEQ unit provides both bright white light and a red aiming laser which can be activated either using the onboard activation button or the included pressure switch. The WADSN PEQ15 LA-5C requires two CR123a cells, either standard disposable cells or rechargeable cells. 

If you need a compact tactical flashlight for your pistol, SMG or short-barreled rifle, check out the OPSMEN Fast 402 Ultra Weapon Light! This tactical flashlight is constructed from 6061 aviation-grade aluminium alloy and boasts an integral 20mm Picatinny rail mount and a built-in multi-function switch.

The Fast 402 outputs a maximum of 600 Lumens with a 150-meter beam throw, making it bright enough to dazzle the enemy when you breach a room in CQB with enough range to illuminate targets at longer ranges. Its robust construction grants the Fast 402 recoil resistance, 1.5m impact resistance and IPX7 water and dust resistance, ensuring it is battle-ready, even mounted on a heavy recoiling GBBR. If you're looking for an affordable tactical flashlight which is more robust than the average, the Fast 402 is what you need!