Airsoft Magazines

A Medium Capacity Magazine for the CYMA CM.033 Thompson / M1A1, that holds a total of 60rnds and will feed BBs into your replica until empty, without the annoying rattle of High Cap Magazines. It is filled from the top using a Speedloader to force BBs into place, and is constructed to a tough standard using Polymer. As a final party trick, these Magazines are compatible with Tokyo Marui replicas as well.

EMG has teamed up with Lancer Systems to bring you a fully trademarked and licensed 5.56x45mm style magazine to give your Airsoft M4 AEG some serious style points! The mag features an ultra-modern aesthetic with the following trademarks:

• '5.56x45mm'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid-cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from a translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible. As with other mid-cap mags, a speed loader or loading tool is required to load the mag and loading is carried out through the fill/feed port at the top of the magazine body. If you're working on a 5.56x45mm-themed build and need modern magazines, these are perfect!

If you're looking for spare mags for your Golden Eagle Hi-capa, here they are! The 25rnd Green Gas Magazine for Hi-capa GBB is constructed from alloy with brass valves, rubber o-rings, a steel feed spring and a polymer baseplate and is a green gas magazine. The mag can be filled using the fill valve on the base plate and is loaded with BBs either through the feed lips at the top of the mag or by pulling the follower down and loading BBs in through the front.

This magazine is compatible with the Golden Eagle Hi-capa series but is patterned after the TM design so should also be compatible with other Hi-capa platforms as long as they use the Tokyo Marui internal system.

If you are Milsim-curious and occasionally give skirmishing a go with real-cap magazines, the ARCTURUS 30/130rnd Variable-Capacity Magazine for M4/AR-15 AEG is the perfect mag to fill your rig with. These magazines have adjustable capacity, meaning you can switch between a realistic 30-round capacity and a more skirmish-friendly 130-round capacity. Like a standard mid-cap, these mags are loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading tool.

To switch capacity, simply remove the screw retaining the baseplate, slide the internals of the magazine out through the top and flick the switch on the magazine's internal shell. Being styled after real steel STANAG magazines, these mags are compatible with most M4/AR-15, SCAR-L, 416 and SA80 AEGs and are constructed with an authentic steel shell with reinforcement ribs stamped on each side. If you fancy giving Milsim a try but you aren't ready to commit, these mags are a great place to start!

The Cybergun 35rnd Magazine For Desert Eagle .50AE AEP is exactly what you need to keep your CM.121 or CM.121S in the fight for longer. This unique magazine is designed exclusively for Desert Eagle AEPs and is not compatible with other pistols. It has a capacity of 35 BBs which is useful considering the full auto capabilities of the Cyma Desert Eagles. To load the BBs you can pull the spring downwards and insert BBs directly into the feed lips using a speedloader.

The Jing Gong 100rnd P90 Mid-Cap Magazine is transparent, allowing you to constantly monitor your remaining BBs so you don't get ambushed whilst having an empty magazine! This magazine fits perfectly into the CM.060, giving you smooth reloads even in the heat of the battle when the adrenaline is pumping!

It is made from a strong polymer and sturdy steel feed spring making it a mighty fine magazine that will last you a long time. This magazine can hold approximately 100 BBs so you have plenty of shots available if you opt for semi-auto firing, but if you prefer full spraying, this large magazine will surely have enough BBs in it so you can hit your target, or at least we would hope so...

If you need mags for your SSR77, these are the ones! The Novritsch 180rnd Magazine for SSR77 AUG AEGs is constructed from translucent brown high density polymer with an olive green baseplate, just like real AUG mags. The mag holds 180 BBs loaded through the fill/feed port on the top using a speed loader or loading tool. 

Being a mid-cap magazine, you won't get any battle rattle from this mag despite its respectable 180-round capacity. Compatibility-wise, this mag should fit the majority of AUG AEGs on the market and is ideal for the super speedy Novritsch SSR77 range!

If you're running the super speedy Novritsch SSR9 DSG, you'll need some magazines to keep it well-fed! The Novritsch 120rnd Transparent Magazine for SSR9 AEGs is a mid-cap magazine constructed from transparent brown polymer, keeping the material strong while allowing you to keep track of how many BBs remain. 

Like other Airsoft mid-caps, the SSR9 Transparent magazine can be loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. When filled, this spring-loaded mid-cap won't rattle and give your position away, making it great for skirmishers who prioritise stealth and like to avoid the "tactical maracas" noise of high-cap mags. Keep your SSR9 in the fight for longer with the Novritsch 120rnd Transparent Magazine for SSR9 AEGs!

The Novritsch 32rnd Gen.3 Gas Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas which is refilled at the bottom. The BBs are loaded into the magazine by pulling down the spring tab and filling the BB chamber with a speedloader. This mag has a 1-stage valve and a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 32rnd Gen.3 Gas Magazine for SSX23/303 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

If you require a spare magazine for your M249 AEG, this is for you! The  Novritsch 2000rnd Electric Box Magazine for M249 AEGs is designed for the Novritsch SSR249, however, it should be compatible with most other M249 AEGs on the market. The magazine is constructed from polymer with feed tubes coiled from steel wire and a black fabric cover. This magazine boasts both a sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding for you when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!

If you need a high-quality magazine for your M4/AR-15 AEG, you are in luck! The Novritsch 225rnd Magazine is the gen.2 model of Novritsch M4 magazines and comes with some new refinements and improvements. It comes with a monopod baseplate, perfect for shooting from a prone position. It also has a number matrix on the bottom so you know which magazine you're using.

There is also a viewing window on the side of the magazine so you know when you're running short on BBs. The baseplate is also easily removable and the internal magazine can be removed for easy maintenance and cleaning. This magazine is the perfect choice for any skirmisher who is looking for a reliable and consistent performance!

If you have an ARCTURUS AK in your arsenal and need some spare magazines for the battlefield, look no further! The ARCTURUS 30/130 Adjustable Mid-Cap for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

The magazine's capacity can be adjusted from a real capacity of 30 to a more fitting capacity for Airsoft, of 130 rounds. To adjust it, remove the magazine from the shell, and there is a switch that can be moved, one side for 30 rounds and one side for 130 rounds.

If you're running the SA-F249 and keep running out of rounds, this should help! The Specna Arms 1500rnd Electric Box Magazine for SA-F249 AEGs is an electrically powered auto-winding magazine, boasting a whopping 1500 BB capacity loaded through the fill window on the left side of the magazine body.

This mag requires 2 AA batteries to function (not included), which are installed through the bottom of the bag by unzipping the fabric cover and popping open the battery compartment inside. Also inside the fabric cover is the activation switch, offering both "Sound Control" and "Auto" modes. Using sound control, the magazine will wind as the internal sensors detect shooting. The "Auto" mode is ideal for priming the magazine after insertion and adding extra tension in the event of misfeeds.

Compatibility-wise, this mag is designed for the SA-F249 FLEX™ but may work in other M249 AEGs, though we can't guarantee it. If you're running the featherweight SA-F249 and need to put more rounds down range, the Specna Arms 1500rnd Electric Box Magazine for SA-F249 AEGs will do the trick!

A Spare Gas Blowback Magazine for any generation of the WE F226 range. 

If you need the best mags around coupled with the best BBs, here you go! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM 1 250rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. If you run a high performance M4/AR-15 AEG platform, this bundle was made with you in mind!

Looking for mags for your M14 battle rifle? Jing Gong has just what you need! The 400rnd High-capacity magazine is designed for Tokyo Marui style M14 AEG rifles such as the Jing Gong JG1401 and CYMA CM.032 but is not compatible with G&G M14 AEGs.

This mag holds an impressive 400 6mm BBs and is a wheel wound high-capacity design with a winding wheel located on the baseplate. The mag can be loaded through its fill window on the top rear of the magazine body which is easy to open by hand with the help of a fingernail. This magazine has a steel shell to give a realistic feel, and has reinforcement grooves in either side for that classic M14 cold war battle rifle look.

An Airsoft 6mm BB gas blowback magazine for the 4.3 Hi-Capa pistol series. The magazine is constructed from Alloy, with Polymer feed lips, base plate and follower.

If you are the proud owner of the impressive King Arms PDW SBR, or you have another AEG that takes SMG-5 magazines, this great value pack of 5 magazines may be of interest to you. The set includes 5x 100rnd medium capacity magazines constructed from polymer with steel feed springs. The magazines can be filled through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. These mags are patterned after the standard steel SMG-5 magazines and would fit in with any SMG-5 loadout perfectly!

If you're loading up on magazines and like them modern, the Novritsch 140rnd Mid-Cap Magazine for M4/AR-15 AEGs is ideal! This spring-loaded mid-cap magazine holds 140 rounds and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader.

Constructed with a strong polymer shell and steel feed spring, this mag won't rattle as you run like a high-cap would and is very easy to handle in wet conditions compared to steel-shelled STANAG magazines. Compatibility-wise, this mag should fit and feed in most M4/AR-15 and SCAR-L AEGs and also works well with the Novritsch SSR63A2 AR36 AEG. 

Need mags for your TM ZET system M4/AR-15 GBBR? The M4A1 MWS ZET 35rnd Gas Magazine from the one and only Tokyo Marui is what you need! Made to the high standards associated with Tokyo Marui, this 35-round magazine is a steel-shelled STANAG magazine design which accepts summer gas, green gas or red gas and is compatible with the TM M4A1 MWS and the MTR-16 GBBRs. 

If you love your speedy SSR9 DSG but don't love reloading every couple of minutes, the Classic Army 1400rnd Drum Magazine for Novritsch SSR9 AEGs belongs on your gat! This electrically powered auto-winding drum mag holds a positively epic 1400 BBs and winds up via the button on the front, saving you time winding high-caps and meaning you'll almost definitely never need to reload unless you have a seriously heavy trigger finger!

The Drum Magazine is powered by a 9V battery (smoke alarm style) which is installed through the compartment on the front of the magazine. If you don't have a 9V handy and don't want to raid your smoke alarms, you can grab one here. BBs are loaded through the fill window on the rear of the magazine; simply open the port and pour your BBs in. With this done, press the button on the front of the mag dead centre for a few seconds and the mag will wind up, ready for you to let rip!

Compatibility-wise, this magazine works with the Novritsch SSR9, SSR9 DSG and Classic Army X9 AEG series, made by Classic Army and supplied by Novritsch. The mag is made predominantly from high density polymer to avoid compromising your in-game agility and making your SMG unwieldy. If you know how quickly an SSR9 DSG dumps a mid-cap and you CBA practicing your fast reloads and investing in heaps of standard mags, the Classic Army 1400rnd Drum Magazine for Novritsch SSR9 AEGs is what you need!

If you want more BBs but don't want to weigh yourself down with an excessive amount of magazines, you need a high-cap magazine! The ARCTURUS Hi-Cap 350-BB magazine for M4/AR-15 AEG holds more than enough BBs for multiple firefights out on the skirmish field and is based on the iconic NATO STANAG 30rnd mag with its stamped steel shell.

Like most other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, open the window, then pour your BBs in. With this done, use the winding wheel on the baseplate to tension the mag, and you're all set. If you need more capacity but don't want to compromise agility with a rig full of magazines, the ARCTURUS Hi-Cap 350-BB magazine for M4/AR-15 AEG is what you need!

If you have ever spotted a vulnerable target, raised your Airsoft sniper rifle and gently squeezed the trigger and had nothing come out, you will understand the need for a way to monitor your ammo levels when sniping on the Airsoft field. Maple Leaf have the answer to our prayers, right here! The Transparent Magazine for the VSR-10 is constructed from a transparent polymer, allowing you to verify that your magazine is fully loaded before putting it into your mag pouch, and also allows you to quickly check how many BBs you have remaining through the clear witness window on the magazine's base. Never shoot blanks again with this mag!

A Spare BB Airsoft Magazine for ASG's Green Gas powered CZ P-09 Gas Blowback pistol.

If you need capacity for your S&T PPSh-41 AEG but don't like drum mags, get yourself a few of these! The S&T 540rnd High-cap Stick Magazine for PPSh-41 AEG is constructed from steel with polymer internals, holding 540 BBs loaded through the fill window on the top of the mag body.

This mag is only compatible with the S&T PPSh-41 and will not fit the Snow Wolf version.

If you need mags for your King Arms VSS Vintorez or AS VAL these are the ones! This great value box of 5 midcaps is built to match the real thing perfectly, including the reinforcement ribs on the sides and the unique shape of the 9X39mm real steel Vintorez/VAL magazine. The magazines can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. Being spring-loaded mid-caps, with these mags in your rig you don't need to worry about battle rattle!

These mags are designed for the King Arms VSS Vintorez/AS VAL AEG platform and will not work in the LCT or CYMA VSS/AS VAL AEGs.

Grab yourself some spare mags for the lesser seen but extra-cool SG55x series Airsoft AEG rifle so you can show the AR users what a weapon of class can do! Holding 200 rounds with wheel wound function and featuring integrated clamp lugs and semi-transparent design.

If you have an M4 with a rapid rate of fire, these magazines can easily keep up! The TPM-AR is one of the latest enhanced magazines from PTS Syndicate, a brand well known for its premium mags. The TPM-AR is compatible with practically any M4 AEG and is styled after the iconic design seen everywhere in Airsoft. This magazine is a spring-fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

A multipack of magazine for the ASG Scorpion Evo. These new magazines from ASG allow you to insert your own decals to make your magazines look more realistic. 

If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!

Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.