Airsoft Magazines

Looking for a CO2 magazine for your SRC Hi-capa to see it through the winter months? You have found what you need! This 28rnd CO2 Magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.

This magazine houses a single unthreaded 12g CO2 capsule which can be loaded through the bottom of the magazine by removing the baseplate. If you want to guarantee your SRC Baba Yaga can hack it when the temperature gets low a CO2 mag is the perfect solution!

If you're running one of the new Umarex BERETTA PMX SMGs, you'll need a few of these to keep the fun and kills coming! The 48rnd Green Gas Magazine is constructed from alloy and compatible with the Umarex BERETTA PMX. The mag can be loaded either through the feed lips at the top of the mag body or through the feed channel by pulling the follower down. We recommend a speed loader to make the loading process easy and avoid being the last one ready on game day!

This is a green gas magazine and is compatible with summer gas, green gas or red gas and can be filled by inverting the magazine through the fill valve on the baseplate.

If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!

Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!

If you're running an S&T Lee Enfield and need more mags, these will do the trick! The 32rnd Magazine for S&T Lee Enfield Rifle No.4 MK.I is patterned after the real steel No.4 MK.I detachable magazine which differs slightly from the earlier No.1 MK.III mags in the geometry of its reinforcement ribs. This makes this mag perfect for the stitch counters who need the perfect look for their No.4 MK.I but for those less picky Lee Enfield wielders, this also fits the S&T Rifle No.1 MK.III.

As with the No.1 MK.III magazine, this mag is loaded through the fill/feed port at the front of the magazine body using a speed loader or loading tool. The mag is finished in a realistic gun metal grey with an antique look, steering well clear of any hints that this mag isn't the real deal. If you're an observant skirmisher or collector seeking the correct magazine for your S&T Lee Enfield Rifle No.4 MK.I, the 32rnd Magazine for S&T Lee Enfield Rifle No.4 MK.I is exactly that!

If you are rocking the Delta Armory M24 R700 Sniper Rifle and need some spares for the battle, you're in luck! This magazine is designed exactly for this platform and holds 24 BBs, not a lot, but when you consider it's for a sniper rifle, a couple of these will last you a long time on the battlefield.

With spare Delta Armory 24rnd Magazines, you'll be able to stay in the battle for longer, camping in the perfect position, waiting for the unfortunate opponents to cross your sights.!

A low capacity AR36 magazine from ASG, with a transparent Polymer casing and dummy rounds which can be seen through the case.

Buy a triple pack and save some money in the meantime! The latest PTS Enhanced Polymer Magazine that allows you to switch from a 30rnd to 120rnd capacity within a split second from the underside of the magazine! The most robust magazine on the market, a must for anyone seeking realism and reliability.

If you're rocking the WELL PRO WE06-GM PPK-20 GBB SMG, these are what you need to keep the recoil thumping! The WELL PRO 38rnd Green Gas Magazine for WE06-GM PPK-20 GBB is constructed with an alloy shell and polymer feed lips, replicating the shape of the real steel PPK-20/PP-19-01 magazine flawlessly.

The mag can be loaded through the feed lips at the top using a speed loader or by hand, though this is much easier if you pull the follower on the front down to relieve spring pressure. The gas fill valve is concealed beneath the stamped steel baseplate; simply lift the bottom section of the follower up and slide the baseplate off to the rear to access the valve. This magazine also features a "Bolt stop" mechanism, giving you the "dead man's click" when your mag runs dry, just like the real PPK-20!

An 8 round magazine for the SRC 7.65 pistol.

So, if you have got yourself the Short Magazine Lee Enfield rifle from S&T, you will probably need a few more short magazines to go with it, eh? Introducing the Lee Enfield Rifle No.1 Mk.III S.M.L.E magazine from S&T, an alloy 35 round magazine with a beautiful old-school antique still finish on the outside. This magazine is a spring-loaded design and can be filled either with a speed loader or by hand from the fill port at the front. This magazine is around the length of a 7.62 STANAG magazine and could be carried in 7.62 fabric magazine pouches with a spacer in the bottom for easy access.

If you're in search of some extra magazines for your WELL PRO WE09 AK-12K, this is exactly what you need! These magazines are designed specifically for the WELL PRO gas AK series. They are constructed with a strong polymer shell holding the alloy internals and steel spring. These materials are guaranteed to resist the rough conditions of any skirmish.

This magazine holds a whopping 38 BBs, a larger amount than the usual 30-round capacity of other gas magazines. The BBs are loaded through the top, just like other gas magazines. To fill the magazine with gas, you can find the fill valve on the rear of the magazine near the top.

This magazine inserts just like any classic AK magazine would, with the rock and lock method. This means you have to insert the front section of your mag first, then "rock" your magazine back to "lock" it in place in your AK rifle. If you need a high-quality magazine for your WELL PRO WE09 AK-12K, this is the best choice for you!

A spare or replacement magazine for Vorsk's VM9 GBB pistol. This magazine is constructed from alloy with a steel feed spring, polymer feed lips and brass valves. The magazine holds approximately 25 rounds and can be loaded either with a speed loader or by hand through the feed lips at the top, or the feed channel in the front. This magazine is suitable for summer gas, maintenance gas and green gas.

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard magazine length, holds 21 rounds and is a direct replacement for the magazine which comes with the pistol. The magazine can be filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard magazine length, holds 21 rounds and is a direct replacement for the magazine which comes with the pistol. The magazine can be filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

If you need mags to keep up with your SSP28's insane rate of fire, these are the ones! Patterned after real steel Glock mags with a +2 round extension, the Novritsch 30rnd SSP28 Green Gas Magazine is made with an alloy shell, polymer feed lips, a polymer baseplate, brass valves, a rubber gas route bucking and rubber O-rings.

The fill valve is located on the baseplate, and to fill it with gas, you will need to invert the mag and your gas can, as is the case with other GBB pistol mags. Loading BBs can be done either through the feed lips on the top or through the widened follower channel on the front by pulling down the follower. Please note, this magazine is only compatible with the SSP28 GBB and won't fit the SSP18, TP22 or any other EU series GBB we have tested.

If you run your Hi-Capa as a primary and find yourself short on ammo, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 GBB Pistols will keep you shooting for longer! This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones. This is the chrome silver version, ideal for the stylish skirmisher. If you need the black version, check it out here!

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Magazine for R501/R603/R604 GBB Pistols will be a useful addition to your kitlist!

A spare magazine for the Gas Blowback submachine gun; the WE SMG-8, and the WE SMG-A1 (Also known as the New Wave - NP7 or "Small Rice 7").

*Please note that this magazine is not compatible with the Tokyo Marui SMG-7 or Umarex MP7 platforms

This 54rnd magazine is designed for AR36 platform Airsoft Electric Guns, and comes included with a set of Bullet Stickers to install behind the semi-transparent plastic, to make your replica look as realistic as possible. Not only this, but multiple magazines can be clamped together for lightning-fast reloads and easier magazine management. A Speedloader is required to fill; the magazine will feed until empty, without any annoying rattle sound.

Stay in the fight for longer with the WELL 30rnd Low-Cap Magazine for MB02/03/07/10 Sniper Rifles! This magazine is made with an alloy shell, polymer internals and a steel feed spring and is designed for WELL-branded VSR-10 clones such as the MB02/03/07/10 series.

This mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod. Compatibility-wise, this mag will work in any WELL or WELL PRO VSR-10 clone rifle and may also work in VSR-10 clones made by other brands. If you're running out of rounds before you're back at respawn, grab some WELL 30rnd Low-Cap Magazines for MB02/03/07/10 Sniper Rifles to maximise your K:D ratio!

If you need a spare mag for your Double Bell Lee Enfield, here you go! The Double Bell 6 Shell Magazine for SMLE No.1 MK.III Lee Enfield Rifles holds 6 Double Bell Lee Enfield/KAR98K shells (not included) and is compatible specifically with the Double Bell Lee Enfield No.1 MK.III S.M.L.E Bolt Action Sniper Rifle; Shell Ejecting. 

The magazine is constructed from alloy with a gun metal finish which closely matches the real thing. While it may not be the most practical skirmish primary, the fun factor of the shell-ejecting Lee Enfield is off the charts. If you want to keep your Double Bell Rifle No.1 MK.III SMLE well fed, this magazine is what you need!

If you need mags for your Novritsch SSQ22 GBBR you have found them! These magazines are styled after real steel 10/22 25-round magazines and are constructed from high density polymer with alloy internals and a steel feed spring. The outer shell of the magazine boasts textured panels to make the mag easier to grip during a speedy reload, and each magazine holds 36 BBs.

Loading the magazine can be done in one of two ways; Either pull the follower on the front of the magazine down to the bottom and load with a speed loader through the loading port on the front, or use a GBB adapter with your speed loader and load through the feed lips at the top of the mag. The gas fill valve is located on the bottom of the mag, and as with all gas magazines, the mag needs to be inverted in order to fill it. These mags work well with the Novritsch SSQ22 but unfortunately are not compatible with the ASG/KJ Works KC-02. If you are planning on running Novritsch's sporty new 10/22 style carbine, a few of these is a must!

If you're running a WELL MB441 Series sniper such as the WELL MB4418-2 WELL MB4418-3, you need a couple of these. The WELL 30rd Low-Cap magazine for WELL MB441 Series Sniper Rifles is constructed with a steel shell, polymer internals and a steel feed spring, showcasing realistic mock reinforcement grooves on each side, just like real steel sniper magazines.

This mag holds 30 BBs and is loaded through the fill/feed port at the top front of the magazine body using a speed loader or loading tool. If you want to keep your Sniper Rifle in the fight for longer, these spare magazines are the key!

Do you need a couple of spare magazines for your Type 38 or Type 97? This is exactly what you are looking for! It is a direct copy of the magazine that comes with the Arisaka rifles and therefore it will be a guaranteed fit. This does however mean that it is ONLY compatible with these rifles and no others.

It is constructed from a high-density polymer and holds 26 BBs, it's the perfect purchase for anyone looking to increase the number of magazines they carry allowing them to remain in the field for longer. Its spring-fed design negates the "battle rattle" effect, allowing you to stay sneakier!

A green gas magazine designed for the ICS BLE-XFG range of pistols. Holds up to 19 rounds

This spare magazine for the G&G Armament Piranha gas blowback Airsoft pistol is constructed with a transparent polymer shell with mock 9x19mm cartridges visible within, and is a great way to make your pistol stand out on the field. It is filled with BBs using a speedloader, preferably with a GBB adapter, and can be filled with gas using the fill valve on the baseplate. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer and avoiding the long walk back to the safe zone to reload!

If you need more mags for your NUPROL Tango T96, Well MB-06 or ASG Urban Sniper Rifle, this is the one! The NUPROL 24rnd Magazine for Tango Series T96 Spring Sniper Rifle is a spring loaded low-capacity magazine which holds 24 BBs, loaded through the feed lips on the top either by hand or using a speed loader.

This magazine is compatible with the NUPROL Tango Series T96, ASG's Urban Sniper Rifle, the WELL MB-06 Spring Sniper Rifle and the Maruzen APS SR2 Sniper Rifle on which the design is based. If you need more mags to keep your bolt-action in the fight, the NUPROL 24rnd Magazine for Tango Series T96 Spring Sniper Rifle is ideal!

If you need short mags for your S&T Sterling or E-11 Blaster custom build, you just found them! The S&T 50rnd Short Mid-Cap Mag for Sterling AEG is constructed with a steel shell, polymer internals and a steel feed spring and is compatible with all S&T Sterling AEG variants, including the E-11 Blaster custom. 

As with other Airsoft mid-caps, this mag can be loaded through the fill/feed port on the top of the mag body using a speed loader or loading rod. If you run an S&T Sterling and want more compact mags, here you go!

If you need spare magazines for your Specna Arms or EMG Salient Arms BLU and you want to keep your pistol pure with the exact mags for the platform these are what you need! These magazines are manufactured by Armourer Works and licenced by Salient Arms through EMG and come with a Salient Arms extended baseplate to complete the SAI look. This is effectively an EU series magazine, but the included baseplate features the S in a cube logo and SAI in recessed detail on the bottom to complete the Salient Arms look.

The magazine can be filled through the fill valve on the baseplate with the magazine held inverted, and BBs can be loaded in through the feed lips at the top, or by pulling the follower down and loading through the widened section of the channel on the front, depending on your preference. Obviously, standard EU series magazines from WE and Armourer Works will fit and feed in the Specna and EMG BLU GBB pistols, but what is the point of going for a stylish Salient Arms pistol without the proper magazines?

If you want to keep your B9 pistol running when the cold sets in a CO2 mag is the only way to do it. The WE 25rnd CO2 Magazine For B9/92 is constructed from alloy with polymer feed lips, a brass knocker valve and rubber gas route bucking. This CO2 mag is designed for the WE B9 and B92 pistols and will not work in other versions. The magazine can be loaded through the feed lips at the top of the design and due to the lack of an external follower, a speedloader with a GBB adapter is recommended for ease of loading. 

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

A magazine for the VFC McMillian M40A3 6mm BB Spring Action Sniper Rifle and holds up to 20 BBs at a time.