Counter-Strike 2 & CS:GO Airsoft Replicas

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode.

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you're after a high-performance primary with a militant aesthetic, check out the Specna Arms SA-P04 PRIME™ M4A1 CQBR AEG! Equipped with some of the best internals we've ever seen in an out-of-the-box AEG, the SA-P04 boasts a powerful Dark Matter brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced tappet plate, and much, much more!

The Prime™ is Specna's newest line of AEGs, taking its traditional AEG silhouettes and stripping away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth™ MOSFET or the HAL™ MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL™ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're into the classic M4A1 look and want the best internals an out-of-the-box AEG can hope for, Specna Arms has your six with the SA-P04 PRIME™ M4A1 CQBR AEG. A beast in terms of both build quality and performance, the SA-P04 is the ideal base for any military-style custom build!

If you're just starting your Airsoft adventure and need a cheap starter replica which can do it all, the CYMA CM.506 M4A1 RIS CQB AEG Rifle is ideal. This M4/AR-15 platform AEG is constructed almost entirely from high-density polymer with an alloy outer barrel and trim parts, keeping the build lightweight and agile, not to mention cost-effective. While it weighs practically nothing (only 1.7kg!), the CM.506 doesn't feel flimsy thanks to its use of high-density ABS polymer. Inside we are treated to surprisingly well-equipped internals, offering respectable performance in both outdoor and indoor skirmishes.

The alloy version 2 gearbox the CM.506 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.506 is absolutely mission-ready, equipped with a 20mm Picatinny quad rail handguard and 20mm railed receiver, ready for any 20mm Picatinny accessories you need, from red dot sights and scopes to vertical foregrips, laser aiming modules and tactical flashlights. The alloy outer barrel is rocking 14mm CCW male threads, meaning you can add a tracer unit to make your BBs glow or a suppressor for sneaky styling. If you're ready to get into the sport with one of Airsoft's most popular platforms, the CYMA CM.506 M4A1 RIS CQB AEG Rifle is ready for you!

If you like your M4 AEGs simple and effective, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is perfect for you! Based on the real steel M4A1 in the shorter CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle most long-range threats while not being too long that close-quarters combat becomes impossible.

 On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 base platform a slight facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics and a shorter barrel length, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is the best choice!

If you like your M4 AEGs simple and effective, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is perfect for you! Based on the real steel M4A1 in the shorter CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle most long-range threats while not being too long that close-quarters combat becomes impossible.

 On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 base platform a slight facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics and a shorter barrel length, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is the best choice!

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat.

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted.

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

If you're seeking a solid starter platform with plenty of upgrade potential down the line, you're in good hands with the S&T M4/AR-15 CQBR Sports Line AEG; ETU Version! This M4 AEG is made predominantly from high-density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, keeping agility at maximum and making it ideal for younger skirmishers or those with less physical strength.

On the inside, the S&T CQBR features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto.

For new skirmishers looking for a platform with easy handling, wide compatibility, upgradable internals and impressive performance as it comes, the S&T M4/AR-15 CQBR Sports Line AEG; ETU Version is a superb option. Even experienced Airsofters accustomed to full metal builds will appreciate this lightweight yet high-quality build!

If you're a realism seeker looking for the next step up from an AEG, the WE M4A1 Open Bolt GBBR; V3 System has your name on it! A considerable improvement over the previous WE Open Bolt M4 GBBR, the V3 improves reliability with choice steel internals, reinforcement in key places and a full internal redesign resulting in better rapid fire performance and long-term durability.

The most notable redesigns are its steel valve knocker and steel bolt catch contact surface, solving known issues with WE's previous designs and avoiding the immediate need for upgrades or bodge jobs. The trigger group has also been considerably reinforced, but the inner barrel and HOP-up bucking are still GBB/VSR spec, giving you access to some of the best upgrade parts in the business if you want to improve accuracy and range. The stock inner barrel is also now a 6.04mm tightbore, replacing the 6.08mm standard bore barrel of the previous version.

If you prioritise realism and like to work hard in-game like the real warriors do, the WE M4A1 Open Bolt GBBR; V3 System should be on your shopping list. With realistic 30-round magazines, violent recoil and a manual of arms almost identical to the real M4A1, this is a primary for the pros!

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

This is the best GBBR on the market, no debate. The Tokyo Marui M4A1 CQB-R Block 1 has inspired plenty of other brands with its unique ZET system. This gas blowback system provides this replica with a thunderous recoil and an extremely realistic feel, any skirmisher will be impressed with this rifle, from mil-sim to casual players, this Tokyo Marui rifle is a lot of fun for anyone!

The great thing about Tokyo Marui platforms is that there is no struggle finding after-market parts, as many upgrade parts and replacement pieces are built to work for Tokyo Marui platforms, not that you will need many aftermarket parts because this CQB-R is built to perform well and last a long time. If you've been searching for that extra taste of realism from your Airsoft replicas, the Tokyo Marui CQB-R GBB Rifle Block 1 will certainly satisfy you!

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat.

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted.

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

Small but mighty! That's one way to describe the Specna Arms SA-B02 ONE™ Mk.18 CQBR AEG; Kestrel Basic ETU, for what it lacks in large stature, it more than makes up for with its construction and performance. This Mk 18 is the perfect companion for any CQB skirmisher, the railed handguard allows for ultimate customisation and the preinstalled MOSFET allows for some serious snappy trigger response.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the SA-B02 ONE™ to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped Mk.18 AEGs on the market!

If you are building a special forces loadout for your CQB skirmishes and you're in search of a compact Mk.18 to match the look, the Specna Arms SA-B02 ONE™ M4 Carbine AEG; Kestrel Basic ETU is the Airsoft replica for you!