All External Airsoft Parts & Attachments

A Polymer constructed Thumb Rest for 20mm RIS Rail Systems, which will provide a stable platform to comfortably brace the front of your replica, enhancing ergonomics and improving comfort when aiming for long periods of time.

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

Suppose you own a WADSN M300 or an M600 Flashlight and want to keep it protected from any stray BBs during your skirmishes. The WADSN Diffuser for M300 & M600 Flashlights is the exact thing you need to prevent damage and keep your flashlights alive. This protective lens also diffuses the light meaning it produces less harsh shadows, this is ideal for not completely revealing your location when walking around the dark corridors in a CQB skirmish arena.

This diffuser also features a flip-up design, so you can remove the diffusing effect if you need the full effect of your torch to dazzle and surprise any opponents. To mount it on your M300 or M600 Flashlights, release the clasp mechanism, position the diffuser on your flashlight and then re-tight the clasp mechanism. The polymer construction ensures a secure attachment without the risk of causing aesthetic damage like scratches that alloy might cause to your WADSN flashlight.

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

A QD sling plate for M4/AR15 AEGs which have a sliding stock with a buffer tube. This plate comes with a steel QD sling swivel, which can be installed in the sockets on either side of the sling plate, or in any other QD sling socket on your weapon. Simply hold down the button on the swivel, pull it away to release the swivel from the plate. To re-install the sling loop, simply hold the button down, insert into the socket, and release the button. This allows for both left and right-handed use, and quickly detaching your primary weapon or altering your sling configuration without having to use tools or waste time!

If you need something to support the weight of your sniper rifle setup, you can't go wrong with a bipod! The AGM PH-Style Telescopic Bipod for Harris Lug is compatible with common Harris-style sling/bipod lugs found on the stocks of most sniper rifles, including M40A1, M24 and VSR-10 replicas.

Constructed from hefty alloy with a steel sling loop built-in, the PH-Style bipod boasts adjustable leg length via the pair of catches on each and the bipod feet are wedged so you can dig into soft ground for perfect stability. The legs can be deployed and stowed in an instant by squeezing the legs together, and thanks to the included spigot mount, you can quickly detach the bipod if you need to reduce weight. If you find yourself sniping from a static position more often than not, this bipod will be an asset to your setup!

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

A Quick Release Sling Loop for QD Sling Sockets, allowing you to install a Sling Loop that can be quickly released at the press of a button. This makes it ideal for handing your replica over for Chrono, or if you have multiple guns with QD sockets you can switch primaries in a hurry without taking your sling off!

If you're working on a classic M4A1 build or you broke your handguards and need cheap replacements, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are ideal. These handguards are constructed from high density polymer with the classic M4A1 ribbed design and a slightly wider profile than XM177 handguards. 

These are two-piece handguards designed to mount to M4/AR-15 delta rings found on M4A1, XM177, CQBR and other classic M4 configurations. If you aren't sure if these handguards are right for your AR, contact us for clarification. Ideal for lightweight builds or the retro aesthetic, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are affordable and functional!

If your CM.041 SMG-5 AEG has a worn-out muzzle device perhaps it is time to switch it out for a nice new one. This replacement original part from CYMA should do the trick! The Threaded Tri-Lug Muzzle Device is designed for the CM.041 SMG-5 AEG series and is constructed from aluminium. The device mounts to the front sight assembly of the CM.041 series and provides tri-lug mounting apparatus and 14mm CCW male threads at the tip, protected with a knurled thread protector. Freshen up your old SMG-5 with a new muzzle device!

If you are having a hard time seeing down your low-profile red dot sight, this rail riser will make all the difference! The PJ 0.83" Mini Riser Block Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight

A replacement outer barrel for M4/15/16 variants that is constructed entirely from a strong and durable Alloy.

If you are looking for a tracer unit which is small and light enough to use with a GBB pistol, NUPROL has just the thing! The Compact Tracer Unit is constructed with an aluminium shell, and is available in the ultra compact Flash-P style or the slightly larger Flash-G which is a similar size to existing Spitfire tracer units and also provides a muzzle flash effect with each shot.

Both the Flash-P and the Flash-G have 14mm CCW threads built in, and both come with a 12mm CW female to 14mm CCW male thread adapter, suitable for Army Armament, Raven and VORSK GBB pistols. For a CQB-dominating primary pistol setup you couldn't ask for a more perfect pairing!

If you are looking for a tracer unit which is small and light enough to use with a GBB pistol, NUPROL has just the thing! The Compact Tracer Unit is constructed with an aluminium shell, and is available in the ultra compact Flash-P style or the slightly larger Flash-G which is a similar size to existing Spitfire tracer units and also provides a muzzle flash effect with each shot.

Both the Flash-P and the Flash-G have 14mm CCW threads built in, and both come with a 12mm CW female to 14mm CCW male thread adapter, suitable for Army Armament, Raven and VORSK GBB pistols. For a CQB-dominating primary pistol setup you couldn't ask for a more perfect pairing!

If you are looking for a tracer unit which is small and light enough to use with a GBB pistol, NUPROL has just the thing! The Compact Tracer Unit is constructed with an aluminium shell, and is available in the ultra compact Flash-P style or the slightly larger Flash-G which is a similar size to existing Spitfire tracer units and also provides a muzzle flash effect with each shot.

Both the Flash-P and the Flash-G have 14mm CCW threads built in, and both come with a 12mm CW female to 14mm CCW male thread adapter, suitable for Army Armament, Raven and VORSK GBB pistols. For a CQB-dominating primary pistol setup you couldn't ask for a more perfect pairing!

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

The Battleaxe Pistol Grip gunfighter mod.2 for M4/AR-15 AEGs has a cutting-edge grip design with a more vertical angle than other conventional grips, designed specifically for increased comfort in modern shooting stances. This grip also includes a motor baseplate constructed from polymer.

The unique and modern shape of the grip improves comfort and enhances shooting accuracy. As a result, shooters can focus on their target, minimizing hand and arm fatigue whilst taking part in extended skirmish operations. This pistol grip is perfect for those seeking the perfect balance between functionality and ease of use, it also gives your AEG a unique look.

AR36 Airsoft Magazine Adaptor! Change your AR36 Mags to AR-15 ones with this super easy mag adaptor! Simply pop this onto your receiver via the body pin of your AR36 and you're good to get using some AR-15 / M4 Magazines in your AR36! No more having to stock up on loads of mag variants, now you can even mag share with your M4 Airsoft Friends!

If you've got wires hanging off your primary getting in the way, the FMA Low-profile Admin Clips for 20mm Picatinny Rail; 60PCS Set will fix that! Designed to do double duty as rail covers and wire admin clips, these nifty little pieces of polymer keep your wires out of the way thanks to a recess cut in the centre allowing your wiring to run through. These mount to 20mm Picatinny rails and all you need to do to install them is clip them on!

The set also includes a number of clips for running your wires at the side of your rail, giving you plenty of options, all of which keep your setup neat and tidy. Creating a textured surface to enhance grip thanks to the slight separation between each clip, the Low-profile Admin Clips can also be used to add traction to handguards of various lengths, avoiding the need to cut conventional rail covers to length. If you want your primary to look more professional, these are the key!

If you've got wires hanging off your primary getting in the way, the FMA Low-profile Admin Clips for 20mm Picatinny Rail; 60PCS Set will fix that! Designed to do double duty as rail covers and wire admin clips, these nifty little pieces of polymer keep your wires out of the way thanks to a recess cut in the centre allowing your wiring to run through. These mount to 20mm Picatinny rails and all you need to do to install them is clip them on!

The set also includes a number of clips for running your wires at the side of your rail, giving you plenty of options, all of which keep your setup neat and tidy. Creating a textured surface to enhance grip thanks to the slight separation between each clip, the Low-profile Admin Clips can also be used to add traction to handguards of various lengths, avoiding the need to cut conventional rail covers to length. If you want your primary to look more professional, these are the key!

A mountable RIS / RAS rail raiser which allows the user to increase the height at which their Sights and attachments sit to bring them to the correct height. 

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

If you want to add some extra accessories to your AK but you approve of neither top cover mounted optics nor the Russian side rail, this railed gas tube should do the trick! Based on the real steel UltiMAK design, the CYMA 20mm Picatinny Railed Gas Tube for AK47/74 AEG replaces the gas tube and upper handguard of your AK AEG with an aluminium enhanced gas tube with a 20mm Picatinny rail milled into its upper surface.

This style of rail has found its way onto many AKs used in the hands of both PMCs operating in the middle east and civilian tactical shooters in the US and is a great way to mount forward mounted red dot sights and tactical flashlights without doing anything weird to the receiver itself. This part is designed for the CM.04x series of AK AEGs from CYMA but will not fit AKS-74U AEGs due to the length.

An Aluminium constructed outer barrel for M4/M15/M16 Airsoft Electric powered replicas which features a 14mm CCW thread and an extension piece to rapidly adapt between a CQB and Carbine length barrel.

A foam filled Airsoft mock suppressor, designed to be attached to Airsoft 14mm threaded outer barrels, and is specially with adaptors allowing the suppressor to fit both Clockwise (CW) and Counter Clockwise (CCW) threads. 

The G-Series Carbine Kit is a Polymer extension for the forend of an Airsoft G-Series pistol that gives the user 2 x RIS Rails to add accessories, and the ability to carry an extra magazine in ready position for a quick reload.

The G-Series Carbine Kit is a Polymer extension for the forend of an Airsoft G-Series pistol that gives the user 2 x RIS Rails to add accessories, and the ability to carry an extra magazine in ready position for a quick reload.

If you need an ultra-modern QD suppressor and flash hider for your long gun, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit should suit your needs! This is the taper mount version, pre-fitted with an extended collar which allows for quick attachment and removal via the included steel tri-prong flash hider. The flash hider mounts to 14mm CCW male barrel threads, making it suitable for almost every Airsoft AEG or GBBR.

The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement.

The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

Other than its easy and quick removal, the advantage of the Taper Mount Kit is its ability to be converted into a Blast Shield using the included threaded ring. Simply unscrew the front of the suppressor body and replace it with the ring and you've got yourself a Griffin Taper Mount Minimalist Blast Shield! If you're looking for a slick modular muzzle device to finish off your rifle build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit is a fine choice!