All External Airsoft Parts & Attachments

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

If you're looking for a new outer barrel to make your M4/AR-15 AEG reach the moon, the 5KU 18" Aluminium Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 18-inch outer barrel includes pin holes for mounting an M4/AR-15 front sight/gas. 

The 5KU 18" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're extending your barrel for the improved long-range effect or you just want your Airsoft rifle to look massive and intimidating, the 5KU 18" Aluminium Outer Barrel belongs on your M4 AEG!

If you are looking for a suppressor for your lil' AK, you have found the right one. The real world PBS-4 is designed for use on the AKS-74U rifle, but has also been seen in use on full length AK74s!

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

If you're recreating the latest real-world German DMR rifle, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas will put a smile on your face! Patterned after the mount setup provided with the real steel G28 DMR, this set includes a dual ring mount for either 25 or 30mm monotube scopes and a red dot sight mount with a built-in sunshade, designed for T1 footprint/mounting standard micro red dot sights. The set includes spacers to allow a 25mm monotube scope to be mounted, though by default the dual ring mount fits 30mm monotubes.

Both the scope and red dot mount are constructed from aluminium with steel bolts, nuts and screws, mounting to 20mm Picatinny rails. The dual scope ring includes a 20mm Picatinny rail on the top of each ring which is intended to allow the red dot sight mount to be fitted, though these are removable if you want to use the two mounts on separate platforms. On the right side of the mount, you'll find helpful engraved markings indicating the mounting direction, just like the real deal.

While it is designed to mimic the real G28 mount setup and is ideally paired with the East Crane EC-204 G-417 DMR, this mount setup will work on any platform with 20mm Picatinny rails and the included T1 mount has been sighted on MP5 and G36 platforms used by the German Armed Forces and Police. Whether you're replicating the real steel G28 or looking for a pair of unique mounts packaged together, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas would be a slick setup for your primary!

If you're a shotgun-wielding action hero, an Acetech Quark R Shotgun Tracer Unit will further your CQB advantage! Designed to mount to a wide range of M870-style shotguns via its innovative rotatable collar system, the Quark R is effectively the legendar Acetech Bifrost tracer unit resized to suit the menacing bore of 12-gauge style Airsoft shotguns.

This means you have access to a vast range of colour mode options, the ability to light up both Red and Green tracer BBs and a rainbow muzzle flash mode so bright it will even light up standard BBs for the first meter or so of their journey downrange. Power is supplied by an internal rechargable Li-ion battery which is charged via the included USB Type-C cable, keeping this beastly device cost-effective and convenient.

We all know how a tracer unit allows for rapid instinct aiming and how a tracer-weidling opponent makes an intimidating foe in CQB. Pair the Acetech Quark R Shotgun Tracer Unit with the mighty M870 and you have one lean, mean CQB domination machine!

Speed up your reloads with the 5KU CNC Aluminium Quick Release AK Magazine Catch! This machined aluminium Airsoft upgrade allows you to quickly release your magazine without having to take your finger off the trigger. The extended design sits under the trigger guard and provides you with a paddle that can be pressed down to defeat the magazine catch. However, it still provides the classic ambidextrous paddle on the bottom if you fancy an iconic mag flip reload every now and then.

This product is designed for CYMA AK platforms but may fit other brands with modification. It includes all the necessary screws and pins for installation. Enhance your battlefield experience with effortless magazine changes!

With the Novritsch SSX23 Frame Rail, you can mount a flashlight or runcam on the underside of your barrel. It is constructed from strong, lightweight aluminium and is attached to the SSX23 barrel via 2 mounting screws. To attach the frame rail you are required to remove the slide, and then drill two holes at the front under the barrel, where the indents are. After this, you can screw the frame rail in and you're good to go!

The Novritsch SSX23 Frame Rail is a game changer if you skirmish in dark CQB arenas and need the flashlight to stay ahead of the opponents. Instead, this rail section can house a zoom/runcam to capture any long-range or clutch BB shots so you can brag to everyone that you are the ultimate Aisoft extraordinaire!

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you want a pistol that can reach out and touch the enemy at long range, an extended inner barrel is just the thing. The WE PX001 Silencer And Extended Barrel Kit; 11mm CW is designed for the WE PX001 but is also compatible with most WE GBB pistols if you use your original HOP-up unit assembly.

The kit includes an 11mm CW threaded suppressor for 11mm CW female threaded barrels (WE, Armourer Works, CowCow and some others), a 6.03mm tightbore inner barrel measuring 189mm in length and HOP-up unit for the PX001 platform with a pre-installed bucking.

Please be aware, it is possible that the inner barrel will protrude through the tip of the suppressor when installed on certain compact pistols so make sure you measure up before ordering. We recommend adding the length of your existing inner barrel to the length of the included suppressor (138mm); if the length is equal to or greater than 189mm, the inner barrel will fit.

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you want to return your AK-74 to its original roots, Battleaxe has the kit for you! The Battleaxe Wooden Conversion For AK-74 is designed to fit most AK-74s such Tokyo Marui, CYMA and G&G. It will fit other brands too but may need modification in order to properly attach it. The set includes a real wood upper handguard, lower handguard and stock beautifully finished to mimic the real thing.

The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. This is great for the stitch counters, and while this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or give it an iconic look, this Wood Conversion Kit is a fantastic option!

If your CM.097 lower receiver is damaged maybe it is time to replace it with a fresh one! The CYMA Alloy Lower Receiver for CM.097 M4/AR-15 AEG is a replacement original part for the CYMA CM.097 AEG series and is constructed from alloy. The body pins are constructed from steel for maximum strength, and the fire selector markings are finished in a modern style, with coloured bullet pictograms to indicate each mode of fire.

The set includes all body pins, the fire selector, the bolt catch and the magazine release, meaning no fiddling around trying to swap the trim parts from your old receiver, just drop your gearbox straight in!

This Upper and Lower Receiver Set is an original replacement part for the APS ASR series M4/AR15 AEGs but may also fit other gearboxes, though it may require modification. The set includes an alloy upper and lower receiver, a bolt catch, charging handle, a magazine release, trigger guard, a steel dust cover and steel body pins. If you are building a spare upper for your APS ASR AEG this would be a perfect fit, but could also be used to add a touch of metal to a polymer M4/AR15 as long as you are okay with potentially undertaking modifications.

A folding fore grip lovingly designed by NUPROL which fits onto 20mm RIS / RAS Rails to provide another manipulation point on a weapon which can be folded away when not in use.

This is an Aluminium constructed Muzzle Device that is designed for AK Platform replicas, but will fit and work with any Airsoft Gun that has a 14mm CCW Threaded [Male] Outer Barrel, which is 95% of replicas.

An Aluminium constructed rail adaptor for KeyMod rail systems.

If you are working on a multifunctional platform, ready for both indoor and outdoor skirmishes, then this is it! The 5KU 11.5" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 to be ready for any situation then this will get you halfway there, but don't forget you'll need a matching inner barrel too! 

One of the few problems with old-school cool like the SMG5K series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

If your Scorpion EVO stock has developed a bit of wobble or you fancy an ergonomic upgrade, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for ASG CZ EVO 3A1 will take your EVO to the cutting edge! This stock adapter is constructed from CNC-machined aluminium and allows 1913/20mm Picatinny compatible stocks to be mounted, just like MPX and MCX platforms. 

This gives you access to the latest and greatest stock options on the market, ranging from M4/AR-15 buffer tube adapters to lightweight skeletonised stocks and funky-looking visor stocks designed for use with full face protection and respirators. The 1913 interface allows you to swap your stock in seconds whenever you feel like it, giving your EVO extra flexibility to meet the requirements of the mission at hand. If you fancy an aesthetic change for your EVO with loads of functional benefits, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for ASG CZ EVO 3A1 is ideal for your build!

Treat your M4 to this Arcturus advanced stock. Constructed from high density polymer, with an angular design and flat textured and rubberised butt plate, this stock is both comfortable and has a sleek, smooth aesthetic that's sure to complement the look of your AR platform.

This stock is for AEG buffer tube, the adjustment lever is contained within the A-frame of the stock, to reduce snagging.

If you want to return your AKM to its original roots, Battleaxe has the kit for you! The Battleaxe Real Wood Furniture Kit for AKM is designed to fit most AKMs such as Tokyo Marui, CYMA and G&G. It will fit other brands too but may need modification to properly attach it! The set includes a real wood upper handguard, lower handguard and stock beautifully finished to mimic the real thing.

The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. This is great for the stitch counters, and while this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AKM or give it the realistic style it deserves, this Wood Conversion Kit is a fantastic option!

If you are building your dream tactical AK, a railed dust cover can be a great addition to give you more optic mounting options, and the elite tactical look. The 5KU 20mm Railed Tactical AK Receiver Cover is designed to work with Z-Co style handguards and provides a 17-slot 20mm Picatinny rail on its upper surface, and a hinge mechanism which connects it to a Z-Co handguard for functionality similar to the ASK-74U, making battery changes a breeze for those who run a top wired AK. If you are working on your own Spetsnaz build, your AK needs this!

If you want to bring your M1928 Thompson AEG up a level in realism, this conversion kit will do it! The  Battleaxe Real Wood Furniture Kit for CM.051 M1928 Thompson comprises a real wood stock, a real wood vertical foregrip/handguard and a real wood pistol grip. 

To fit this conversion kit you will screws and mounts from the original CM.051, the kit only includes the real wood furniture. This kit is designed for the CM.051 Thompson AEG, it may fit other brands but modification will be required. If your CYMA Thompson needs an added dose of authenticity, a real wood kit is the way to go!

If you have damaged your suppressor mount on your CM.041 SD AEG you may think you are out of luck, but thanks to CYMA expanding its line of replacement parts you can now swap the mounting apparatus out for a fresh new mount, and have your integrally suppressed SMG rocking its suppressor again!

If you have been messing around with your SMG-5 AEG and you have lost your pins, CYMA has the cure! This original parts set includes 2 body pins, one for the trigger group and one for the rear receiver/stock. The pins are constructed from alloy and are compatible with CYMA SMG-5 AEGs but may also fit others, though we cannot guarantee it.

If you have misplaced your SMG-5's rear body/stock pin you are in luck! This CYMA original replacement part is designed for CYMA SMG-5 AEGs but may also fit others. This pin is the rear body pin which holds the stock to the receiver and is constructed from alloy.

We all lose small parts from time to time, luckily CYMA are happy to sell individual components like this! The AK Top Cover Latch from CYMA attaches to the gearbox shell, and with the help of the charging handle spring, holds your top cover on! The latch is compatible with version 3 gearbox shells, and TM-based AK designs. Quite an important bit I'm sure you agree...