All External Airsoft Parts & Attachments

If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

If your dust cover has fallen off and been lost, the CYMA Ejection Port Dust Cover for M4/AR-15 AEG is the solution! This replacement original part is designed for the CYMA CM.097 AEG series but should also fit M4/AR-15 AEGs from other brands. The dust cover is constructed from steel but does not include the long bar/pin needed to mount it to an AR receiver, so make sure you still have yours and you should be set!

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System. Keeping your scope close to your rail is good for seeing exactly where your BBs go after firing them.

Being a two-piece design, and coming included with an Allen Key, they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

The Angry Gun QDC 3-Prong Flash Hider matches the design of real steel flash hiders such as the ones found on AUGs. It is constructed from steel making it extremely durable and sure to withstand any skirmish. This muzzle device is designed to work with other Angry Gun QDC attachments such as their suppressor and tracer unit. These products interlock seamlessly guaranteeing a reliable attachment every time.

This flash hider mounts to 14mm CCW threading, commonly found on most Airsoft assault rifles. It also has a grub screw so you can ensure it is securely attached to your replica with no worries about it coming off. The flash hider also comes with a stainless steel shim, to make sure that it is situated perfectly on your rifle's outer barrel.

If you want a super realistic flash hider that is compatible with Angry Gun QDC suppressors and tracers, this is the one for you! Its steel construction and real steel design certify that this flash hider is perfect for any skirmisher seeking a realistic loadout.

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

If you're looking for a way to make your giant G3 AEG more compact, the Jing Gong Sliding Stock for G3 AEGs will do the trick! Designed to fit Jing Gong and Tokyo Marui G3 AEGs, this stock offers 2 positions of adjustment. The stock can be deployed by pushing the adjustment lever on the bottom towards the left, after which it can be pulled out and into place.

The stock base and butt plate are constructed from high density polymer and the stock bars are alloy, keeping weight to a minimum and providing strength where needed. The butt plate boasts deep serrations for optimal grip in any weather conditions and the stock base includes a sling loop for conventional strap slings. Whether you're working on a G3A4 build or you want to fit your G3 into a smaller gun bag, the Jing Gong Sliding Stock for G3 AEGs is ideal!

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

If you're always bending your neck awkwardly to look down sights, the Novritsch High Red Dot & PEQ Box Mount V3 will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail. 

Constructed from CNC machined aluminium with steel mounting bolts, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the High Red Dot & PEQ Box Mount V3 is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Red Dot & PEQ Box Mount V3 will let you get on target without straining your neck!

If you have had your eye on one of the super cool new spitfire tracers on the market but would prefer it in a more AK-friendly design, we have just what you need! The Vityaz Spitfire Tracer unit from 5KU combines the awesome functionality of a spitfire tracer unit, with its realistic muzzle flash effect and tracing function when used with tracer BBs with the unique looks of a Russian designed suppressor.

If you have plans to style up your AK for 21st century combat the CYMA Aluminium M-LOK Handguard adds M-LOK accessory slots so you can mount the latest and greatest mission essentials and benefit from reduced weight! The set includes an upper handguard with "Grater" style vents and a lower handguard with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions.

Both the upper and lower handguard are constructed from aluminium using CNC machining and are finished with matt black anodising for a smooth and flawless finish. Compatibility-wise, this handguard should fit practically an AK47/74 platform AEG or GBB rifle but will not fit AKS-74U rifles due to their shorter length handguards. Give your AK the PMC or civilian tactical look!

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

If you are looking for a Tracer Unit with Russian styling the KP-9 Spitfire Tracer Unit from 5KU is one to keep an eye on. This device is based on the real world MPI KP-9 flash suppressor used by Russian Special Forces with their PP-19-01 SMGs and is ideal for any 9mm style Airsoft SMG but will fit any Airsoft rifle with a 14mm CCW male threaded barrel.

This KP-9 isn't just about the looks either, inside you will find a Spitfire Tracer insert which illuminates green tracer BBs and provides a realistic muzzle flash effect each time you fire. The unit can be operated in flash only, tracer only or tracer and flash mode, giving plenty of options for the aggressive, the realism focussed and the more stealthy playstyles out there. Whether you run a PP-19 AEG or you are looking for the most menacing looking Spitfire tracer unit out there, this will do the trick!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

This is one for the AK lovers! The Russian Firearm Fanatics and the Weekend Gopnik Operators, here to complete the tactical aesthetic of your AK is the 5KU PT-3 Telescopic Stock, featuring a full alloy construction and a rubber butt pad, this replica PT-3 Classica stock is a fine addition to your Eastern Operator loadout.

A replacement Alloy butt plate for CYMA branded AK series replicas.

A lens protector for EOTech style sights that not only protects your sight from damage, but eliminates tell-tale glare from the lens of your sight - keeping you hidden for longer and giving you the extra edge over your opponents.

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 25mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you want to restore the factory fresh look to your workhorse AK, this part may be of use. The Rear Sight Block for the CM.04x Series is an original replacement part for AKM and AK74 rifles of the CM.04x series. This part will not work on AKS-74U AEGs, but should otherwise fit AKs which use the LCT style of construction. The sight block is constructed from alloy and comes with steel pins to mount it, and includes the handguard disassembly lever but does not include the rear sight or the rear sight leaf spring. The surface finish of this part is a rough textured finish which is a close match for the hard-wearing paint applied to Russian AK variants of the 1960s and onwards.

If you're looking for a flashlight mount for your SMR-style handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is ideal. This mount is constructed from CNC aluminium with steel mounting hardware and designed to mount SF Scout (M300 and M600) flashlights to Geissele Super Modular Rail (SMR) style attachment slots.

The mount offers several mounting positions for your Scout Light, allowing for 3 different heights so you can get your accessories perfectly positioned. The mount also allows for mounting with a slight forward extension to defeat "suppressor shadow" or mounting at the rear to keep the light away from your muzzle, depending on how you install your Scout Light. This mount is only for standard SF M300 and M600 Scout Lights and won't fit the Scout Light Pro series due to its differing mount.

If you're in search of flashlight mounting solutions for the rare but super-slick SMR handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is what you need!

Maybe you have accidentally broken your AUG vertical grip, or you bought the railed version and you want to embrace tradition? Luck would have it Army Armament now offers their AUG folding vertical grip as a spare part! The grip is constructed from high-strength ABS polymer with an alloy core and includes its spring and mounting pin. This part is compatible with the Army Armament AUG but may also fit AEG AUGs from other manufacturers.

Do you want to make your Delta Armory VZ.58 or equivalent look just like the real service rifle? Or maybe you fancy giving your M4 a more classic look, if so, the Ares VZ.58 Flash Hider; 14mm CW is for you! This flash hider is styled after the real steel VZ.58 muzzle device manufactured by the real steel brand Czech Small Arms.

Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake it will give your Airsoft rifle a unique look and add to the realism of the overall platform.

Its alloy construction and black finish are sure to withstand most bumps and scrapes on the battlefield, making it the perfect way to keep your outer barrel and precious inner barrel safe from damage. Style your AEG after an iconic service rifle and remember, VZ.58s are NOT the same as AKs!

A 6mm BB Airsoft replica flash hider, designed for CYMA manufactured AK47 and AK74 replica Airsoft Electric Guns. This replica flash hider is an incredibly simple yet effective way to add an additional element of realism to your AEG AKs.

If you are rocking the Sig Air MPX and you are worried your battery will poke out of the handguard, worry no longer, Laylax have an innovative solution! The Handguard Battery Block for MPX AEG is designed to mount to the outer barrel using a grub screw and close the front end of the handguard up to stop your battery from hanging out when the SMG is pointed down. The block is constructed from aluminium with a matt black anodised finish and is styled to look like the gas block of the bigger MCX, meaning it shouldn't detract too much from the realistic looks of the MPX. This is why we love Laylax, they always come up with a nifty solution for these little niggles!

If you've been looking for some extra rail space on your Novritsch SSR90, this is for you! The Novritsch SSR90 M-LOK Extension mounts to the front of your SSR90 using a screw on either side. Once attached, you have access to an additional 6 M-LOK slots, 2 on top and 4 on the offset angles.

The mount is also designed to be compatible with suppressors, meaning they will not interfere with one another when both are mounted on your platform. If you're looking for some additional rail space, to mount all the mission essentials, then the Novritsch SSR90 M-LOK Extension is exactly what you need.

Customise your MLOCK handguard with this easy to attach Harris lug for use with bipods and slings. Constructed from aluminium, the attachment is sturdy and well-weighted.

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

The STTI B9/B92 Conversion Kit is a Polymer constructed Body Kit for... you guessed it, B9 and B92 Airsoft Gas Blowback Pistols. This awesome kit will convert your lowly Airsoft Pistol into a functional Carbine with Sliding Stock, 20mm Rail System, Ambidextrous Charging Handle as well as plenty of room for a Suppressor, Inner Barrel Extension or Tracer Unit!

If you want to add a modern touch to your AK, the CYMA Aluminium KeyMod Handguard for AK-47/74 is what you need! This CNC Aluminium handguard is equipped with KeyMod negative space attachment slots at 3, 6, & 9 o'clock with a 20mm Picatinny rail running along the top, ready for a PMC-style forward-mounted red dot sight. 

On each side, we are treated to a pre-installed 20mm Picatinny rail adapter for KeyMod, giving you the option of using more common 20mm Picatinny accessories or removing the adapters to mount more modern KeyMod solutions. The handguard itself is constructed in two parts, allowing you to use both or simply the upper or lower handguard, depending on your build requirements. If you're going for the modern tactical AK look, the CYMA Aluminium KeyMod Handguard for AK-47/74 is perfect for your build!