All External Airsoft Parts & Attachments

If you are gearing up to spruce up your old AK AEG, or replace your damaged handguard cap, this might be handy! The LCT Front Hand Guard Cap For AK Variants is an original replacement part for the LCT LCK variants. The part is constructed from steel and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the LCT products but should also work with VFC and other AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full-size AK handguards only.

It features a sling point on the side, making this cap an ideal way to sling your AK platform whilst out on the battlefield. If you're looking for a replacement cap for your Russian rifle, the LCT Front Hand Guard Cap For AK Variants is just what you need!

For those in the market for a suppressor for their AAP-01 Assassin GBB pistol, or for that matter any pistol requiring a slim style suppressor, consider the DDW Suppressor from Action Army. This suppressor attaches to any 14mm CCW male thread and is a lightweight aluminium design with attractive vents and a foam filling for some suppression effect.

If you're running an SSG10 A3 and want it shooting even better than it already does, the Novritsch SSG10 A3 TDC HOP-up Rail Mount will get you there. This part is a unique design from Novritsch, specifically for the A3 variant of the SSG10 and is not compatible with other variants. 

The set includes a 20mm Picatinny rail mount with a TDC HOP-up dial built in and is supplied with the parts you'll need to install it, other than a drill. Be warned, this set requires precision to install and if done wrong, can be catastrophic. As such, we only recommend this to Airsofters experienced with tech work and handy with an electric drill. 

The advantages of TDC HOP-ups are numerous, including providing a stronger HOP-up effect and reducing side-to-side shot deviation. The numerically marked TDC dial also allows you to keep track of your HOP-up settings for different BB weights, a fantastic feature for the serious sniper. The integral 20mm Picatinny rail also allows PEQ lasers, RunCam or Novritsch ClipCam Cheater-Catcher action cameras to be installed in the optimal position. If you want to up the performance of your SSG10 A3 to the maximum, the Novritsch SSG10 A3 TDC HOP-up Rail Mount is what you need!

This one's for all you AK lovers looking to treat your rifle to a new receiver and stock. Constructed entirely from durable steel, this will undoubtedly give you AK a nice sturdy feel with a good weight balance. The stock itself is skeletonised to keep the weight balance and to allow it to fold into the receiver and lock in place with a latch.

The receiver has all the hallmarks of a classic AK body, with its signature level style mag release and angular trigger guard and is even complete with the iconic AK dovetail side mount, to which you can attach the tactical accessories of your choice.

Whether your looking to spruce up your AK47 with a new receiver and folding stock, or fancy creating some Frankenstein's monster of a rifle by attaching this to a non Russian rifle (we won't judge), this solid piece of gear is a great buy at the price.

If you want that classic look for your AKMSU or maybe your Airsoft replica needs an external repair, Battleaxe has the perfect kit for you! The Battleaxe Wooden Conversion For AKMSU is designed to fit most AKMSUs, however, modification may be required. The set includes a real wood upper handguard, lower handguard and pistol grip beautifully finished to mimic the real thing.

The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. While this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or complete your RPK support gun build, this Wood Conversion Kit is a fantastic option

If you own a CM.033 M1A1 Thompson AEG replica, this will most certainly be of interest to you! Introducing the Battleaxe Real Wood Furniture Kit for CM.033 M1A1, a set containing a real wood stock, handguard and pistol grip all authentically profiled to match the real M1A1 SMG. The parts in this kit are all perfectly finished to provide a subtle sheen with wood grain showing through which even the best faux wood cannot match.

The Novritsch SSG10 A2 Stock will completely transform your SSG10 or VSR 10 sniper rifle. The stock and chassis have plentiful features that will elevate your gameplay both in terms of ergonomics and aesthetics. It fits the SSG10 A1 receiver without and adjustments need to be made. It also fits other VSR-10 platforms but requires you to remove the hop-up block plate from your VSR-10 rifle first before installing the stock.

You will need to manually install this part, only those who are absolutely confident in their abilities should attempt to install this stock. 

Uplift your sniper rifle and give it a realistic and comfortable feel with this SSG10 A2 Stock, being a sneaky sniper has never been more appealing!

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

If you're rebuilding an old 1911 or you've lost your barrel bushing, the KJ Works Barrel Bushing for 1911 GBB Pistol should be handy! This replacement original part is constructed from alloy and finished in black, designed for the KJ Works 1911 GBB Pistol series.

The barrel bushing is the part which holds the barrel assembly inside the slide from the front and is essential for functionality in most 1911 and M1911A1 GBB pistol designs. Whether your barrel bushing is scratched and worn or you've lost it entirely, the Barrel Bushing for 1911 GBB Pistol from KJ Works is the ideal spare!

If you've lost an SR25 selector switch, this should be helpful! The CYMA Selector Switch Set for CM.098 SR25 AEGs is a replacement original parts set for the CM.098 SR25 series and includes the left and right side selector switches, mounting screws, springs and ball bearings for that lovely "click" between modes. 

The switches themselves are constructed from alloy and match the KAC-style selectors found on the CM.098 series, including the scallop on the right side selector and the undercut on the left side selector to allow for full auto fire. Selector switches are always going missing, but with this set handy, your CM.098 won't miss a beat even if the worst happens!

An Alloy constructed sunshade for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

An Alloy constructed sunshade for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

A 20mm RIS lower mounted point designed to stop the operator of the weapons' hand from sliding forward in front of the barrel. 

If you are looking for the icing on the cake of your latest build, a unique flash hider may well be the thing that makes it stand out from the crowd! The Barrett REC 7 style flash hider from KRYTAC is a faithful replica of the real Barrett REC 7 flash hider, even down to the Barrett "B in a box" logo which is engraved into the upper surface. The flash hider features two ports on either side, and can be installed by first loosening the grub screw, threading the unit onto your 14mm CCW male threaded outer barrel, and tightening the grub screw back down when the flash hider is in the correct orientation.

If you're looking for a unique muzzle device to top off your build, check this out! The ASG Flash Hider for EVO Carbine; 14mm CCW is constructed from aluminium and has a unique, slanted design with aggressive ports on each side. 

While it is designed for the ASG CZ Scorpion EVO 3 A1 it can be mounted on anything with a 14mm CCW male threaded barrel, so go wild!

A Glass Nylon Fiber constructed Magwell adapter for the ASG Scorpion Evo, which serves as a reference point for your lead hand, and makes guiding a fresh Magazine into the Magwell much easier to perform from memory, allowing you to focus your attention solely on the battlefield where it belongs.

If you're looking to upgrade your Dragunov's stock, look no further. Here we have the latest version of the Russian SVD Dragunov stock by CYMA, specifically for the CM.057. Made of high density, tough polymer, it is a complete pistol grip / stock unit. The stock features an adjustable cheek rest for precise shooting and to increase the comfort of the user, to help you get those long range shots with ease.

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

If you're building out your AK to match the latest real steel builds, the 5KU Lightweight Zco Style AK Upper Handguard is an essential bit of kit. Based on the real steel Zco designs, this CNC 6061 aluminium upper handguard is designed to fit AK platforms with ZCO-style lower handguards and provides a 20mm Picatinny rail at 12 o'clock.

The Lightweight Zco Style Upper Handguard tips the scales at a minuscule 110g, meaning it won't slow you down in-game It comes with the steel mounting screws needed for attaching it to your ZCO-style lower. If your AK is due for a makeover, give it the modern touch it deserves with the 5KU Lightweight Zco Style AK Upper Handguard!

Made from 6061 Aluminium with a matt black anodised finish, this ALPHA KeyMod handguard for AK47/AK74/AKM provides all the latest advantages to this venerable platform. With the real version of the ALPHA being in service with the Russian military, you can dress your AK like Spetsnaz with no gains in weight, owed to this handguards lightweight design. With 5 surfaces to mount your accessories, you can mod more keys onto this than your typical AR15 handguard!

Compatible with INOKASU, GHK, LCT and Tokyo Marui replicas.

If you want to shorten your MCX down a bit or you are going for a slick integrally suppressed look for your next build this outer barrel from Laylax is just what you need. This barrel is 6.5 inches (17cm) in overall length and is constructed from aluminium for a perfect balance between low weight and strength.

At the tip of the barrel, we are treated to 14mm CCW male threading, allowing you to equip your MCX with a suppressor for sneaky duties. The tip of the barrel is wide enough to allow an inner barrel to pass straight through, meaning no need to mod it if you want to keep the original MCX inner barrel length. If installed on a standard MCX the barrel will be entirely beneath the handguard, allowing you to mount a tracer unit or suppressor without increasing the overall length of your setup and give your rifle the "Honey Badger" look. If you are adding a tracer make sure you get a shorter inner barrel as well!

If you're looking for a sneaky suppressor with a quick detach design, the Novritsch Fast Attach Suppressor System is for you! This package consists of a steel flash hider and an aluminium suppressor. They are designed to work with one another to create a fast attach system so you can quickly equip or unequip your suppressor depending on the situation you find yourself in whilst out on the battlefield.

The suppressor features internal foam and cavities designed to baffle and reduce the noise of excess air or gas from your Airsoft replica. Both products are constructed from durable materials, designed to survive the rigors of a tough skirmish. As well as being hard-wearing, they have also been crafted with exceptional aesthetics, the flash hider silhouettes real steel variants and the suppressor boasts a sporty fluted design that is sure to catch the eyes of your fellow skirmishers.

If you're ready to take your operations clandestine, there is no better way than with the Novritsch Fast Attach Suppressor System. Stealth and style are both important for the battlefield, and with this suppressor system, you get both in one!

For the AK guys who want to join the rest of us in the 21st century, CYMA has come through! The Modular KeyMod Railed Handguard is constructed from aluminium and includes a smattering of KeyMod 20mm Picatinny rail sections pre-installed, which can be moved around and placed wherever you like. This handguard is particularly interesting as it can be set up in several different configurations, either with or without the included handguard extension section and with the choice of leaving the upper handguard sections on or removing them to lower the weight. 

If you're working on a DMR build or otherwise lengthy platform, the PTS Syndicate Dead Air Sandman-L Tracer version is what you need to top it off! A detailed, licensed replica of the real steel Dead Air Sandman-L, this mock suppressor is pre-fitted with a muzzle flash tracer module and is licensed by Dead Air Silencers. This, of course, means licensed trademarks across the design, ideal for builds which prioritise realism!

Designed to mount to the KeyMo QD interface present on the included steel flash hider (or other PTS KeyMo muzzle devices), the Sandman-L is quick to attach and remove, allowing you to set up in seconds for the scenario ahead and never be fixed to one configuration. The internal tracer module is powered by a rechargeable battery and recharged via a USB Type-C cable, making it convenient and economical to run compared to older tracer designs which use disposable alkaline batteries.

The Sandman-L is the longest of the Sandman suppressor line, ideal for DMRs and other long platforms seeking the stealthy aesthetic. If you're working on an ultra-modern build and need a suppressor which makes others feel inadequate, the PTS Syndicate Dead Air Sandman-L Tracer version will do just that!

If you're working on a DMR build or otherwise lengthy platform, the PTS Syndicate Dead Air Sandman-L Tracer version is what you need to top it off! A detailed, licensed replica of the real steel Dead Air Sandman-L, this mock suppressor is pre-fitted with a muzzle flash tracer module and is licensed by Dead Air Silencers. This, of course, means licensed trademarks across the design, ideal for builds which prioritise realism!

Designed to mount to the KeyMo QD interface present on the included steel flash hider (or other PTS KeyMo muzzle devices), the Sandman-L is quick to attach and remove, allowing you to set up in seconds for the scenario ahead and never be fixed to one configuration. The internal tracer module is powered by a rechargeable battery and recharged via a USB Type-C cable, making it convenient and economical to run compared to older tracer designs which use disposable alkaline batteries.

The Sandman-L is the longest of the Sandman suppressor line, ideal for DMRs and other long platforms seeking the stealthy aesthetic. If you're working on an ultra-modern build and need a suppressor which makes others feel inadequate, the PTS Syndicate Dead Air Sandman-L Tracer version will do just that!

If you are having trouble reloading your ARCTURUS AK, this should sort it out! The Magwell Spacer for AK-47/74 AEG is designed to fit into the magazine well of any ARCTURUS AK and fill the gap between the HOP-up unit and the front of the magazine well and prevent over-insertion. Unfortunately, this part only works with ARCTURUS AK AEGs and won't fit any other brand as far as we are aware. 

If you are in the market for a new pistol grip and you are a CQB player, a PDW style grip with a refined angle is the best thing for the job! Introducing the PDW Pistol Grip for M4/AR15 AEG from CYMA, a high density polymer pistol grip with a more vertical angle than standard M4/AR15 grips, making it more suitable for use with modern shooting stances.

A lightweight and durable mount for fitting your torch to any 20mm RIS/RAS rail.