All External Airsoft Parts & Attachments

A set of high profile mount rings for scopes up to 30mm wide, which attaches to a 20mm rail and provides a solid platform for you to use your optic.

If you are one for hot-swapping your Hi-capa grips, congratulations on taking pure advantage of the modular nature of the platform! These grip screws from CowCow are designed to replace your old, worn-out grip screws so you can continue to swap and change to your heart's content!

If you are one for hot-swapping your Hi-capa grips, congratulations on taking pure advantage of the modular nature of the platform! These grip screws from CowCow are designed to replace your old, worn-out grip screws so you can continue to swap and change to your heart's content!

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

A simple device yet effective, designed to protect your Airsoft gun's outer barrel threads from damage during gameplay and transportation, or any other situation which might leave the threads exposed to the elements.  

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

If you have plans to build out a Krytac Maxim 9 as a primary pistol you will want this! The Krytac SilencerCo Maxim 9 GBB Pistol 20mm Picatinny Rail Kit provides a single 20mm rail which can be mounted to the KeyMod slots on the bottom of the Maxim 9 suppressor, and is the perfect length to look just right.

20mm Picatinny rails allow you to mount a laser aiming module or a tactical flashlight to your silent killer and assist your efforts in cleaning up the CQB site. For those who see the potential in the Maxim 9 to be the ultimate CQB tool, this rail kit will be an asset! 

Instantly boost the ergonomics of your ARP9 with this simple, yet effective magazine catch. The widened magazine catch retains the ambidextrous nature of the original catch while making it easier to manipulate as well as operable with your index finger. Allows for drop free reloads just using your trigger finger from your firing grip.

A Two-Piece Outer Barrel Assembly for AR/M4/M16 Platform Airsoft Replicas, constructed to a tough standard using Aluminium. The Two Piece design allows you run the barrel in a short configuration, ending just after the A-Frame Sight Post, or in it's longest configuration with the extension piece installed. Both sections of the Outer Barrel feature a 14mm CCW Thread for the installation of Suppressors, Tracer Units and other Muzzle Devices.

If you want to reload faster while keeping your eyes up, the Delta Armory Flared Magazine Well Extension for P-Series GBB Pistols is the key! This flared magwell is constructed from CNC machined aluminium and is compatible with the Delta Armory DA-P series EU17 GBB range. It may fit other brands, but we cannot guarantee it! 

Flared magazine wells have been a popular upgrade for competition pistols for decades now but have recently found their way onto high-end tactical sidearms intended for combat. Designed to guide your magazine in so you can reload "eyes-up" or speed up your reloads without risking missing the magwell, a flared magazine well can save you hours of training and get you back online faster, ready to bag that all-important kill!

On either side, Delta's Flared Magazine Well Extension includes discretely yet cleanly engraved Delta Armory branding, matching well with the aesthetic of the DA-P series for a professional, completed look. The front features a slight extension designed to function as a palm rest, ensuring you have a consistent grip and thus maximum accuracy every time you draw your sidearm. If you want to reload like John Wick but don't have time to train all day and night, the Delta Armory Flared Magazine Well Extension for P-Series GBB Pistols will give you the edge you need!

A 20mm RIS compatible raised scope mount ring, designed to raise up optics to your eye-level, or fit larger scopes onto your Airsoft guns.

This is a set of Pistol Grips for the VORSK Agency VX-9, available in either Dark or Light coloured Real Wood. They have Rubber Inlays to match the original set, providing grip and comfort from the material and ergonomic shape. They're incredibly easy to install, requiring only four screws to fit.

If you're looking for a new outer barrel to make your M4/AR-15 AEG poke into next week, the 5KU 20" Aluminium Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 20-inch outer barrel includes pin holes for mounting an M4/AR-15 front sight/gas. 

The 5KU 20" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're extending your barrel for the improved long-range effect or want your Airsoft rifle to also be effective at jousting, the 5KU 20" Aluminium Outer Barrel belongs on your M4 AEG!

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The slide is machined from aluminium and provides a considerable extension to the standard slide stop on a Hi-CAPA GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip.

Lightweight with a semi matte metallic texture, this slide is also a great way to customise and match the aesthetic of your beloved Hi-CAPA and create the perfect custom build.

If you have dreams of kitting out your NGRS AK with the slickest modern stock attachment interface out there your dreams can now become reality! The 1913/20mm Picatinny Stock Adapter from Laylax is designed for the TM NGRS AK, specifically the side folding stock variants (AKS-74U, AKS-74N and AK-102) and replaces the original skeleton side folder with a short length of 1913/20mm Picatinny rail to allow 1913/20mm Picatinny stocks to be mounted and swapped out for alternatives in seconds. 

The adapter is constructed from aluminium and also has a QD sling socket on the left side, in the ideal position to run a single-point QD sling setup. If you want a more modern look for your AK this adapter gives you access to MPX and MCX stocks in a plethora of shapes and sizes and also the good old M4/AR-15 buffer tube if you are after something a bit more conventional. 

If you're looking for a replacement magnifier mount you're in luck! The Novritsch Flip Up Magnifier Mount fits magnifiers with a tube diameter of 30mm. when flipped up, it sits roughly 6cm above the rail, perfect for skirmishers with or without face masks. It is constructed from lightweight and durable aluminium, making it perfect for players who like to stay light on their feet but remain a threat at range.

To flip this sight, simply push on it and it will lock upright or to the side, this makes it fast and easy to adjust between long and close-range engagements. If you have a magnifier but are missing the mount, the Novritsch Flip Up Magnifier Mount - 30mm is for you!

If your MPX handguard is looking worse for wear, the SigAir M-LOK Handguard for MPX AEG is the fresh replacement you need! This is an original replacement part for the SigAir/VFC MPX AEG, the standard-length handguard which comes with the original SMG, constructed from CNC machined aluminium with a flawless finish.

M-LOK slots are present at the 3, 6, and 9 o'clock positions along with a short section of 20mm Picatinny rail up top, ready for your choice of accessories. Compatibility-wise, this part is specifically for the SigAir/VFC MPX AEG and probably won't work with other brands. If your beautiful MPX handguard has gained some battle wear and you want to restore it, this handguard will do the trick!

If you want to snipe with your KAR98K this should help you get there! The Double Bell Scope Mount For KAR98K is designed specifically for the Double Bell KAR98K and mounts to the receiver rail on the left side of the rifle, just below the rear iron sight. The mount is intended for scopes with a 20mm monotube and is constructed from alloy with steel screws and a steel release lever.

When choosing a scope for this mount we recommend looking for a scope with an objective lens of less than 30mm in diameter, a 20mm monotube and long eye relief due to the "Scout" style mount location positioned closer to the front of the rifle than the average scope mount.

A B10 Style tactical lower AK handguard, designed to allow you to expand the versatility and modularity of your Airsoft AK by providing a 20mm lower and side rail for the addition of Foregrips and Laser / Light modules and any other accessories to suit your playstyle.

The SR Q Furniture Set is a complete Grip/Stock set for AK Platform GBBs (Gas Blowback Guns), and will provide a gorgeous and futuristic all-in-one Pistol Grip and Stock, as well as a comfortable Foregrip to give your AK a sci-fi update! This kit is very easy to install, needing only your Stock and Pistol Grip to be removed, and is the perfect way to give your Airsoft Gun a modern update.

Have you treated yourself to a brand-new EMG 40mm MOSCART "HAVOC" 12" Grenade Launcher? Well, with this Spike's Tactical licensed conversion kit, you can turn it into a stand-alone launcher! It is compatible with the EMG "HAVOC" Launcher only, as it has been designed to accommodate the specific shape and size of that MOSCART launcher.

The "HAVOC" launcher slides onto the bottom section of the 20mm Picatinny rail, giving you the full top section for some tactical accessories like a scope or flashlight. The Chassis is compatible with real steel or GBBR pistol grips and buffer tube spacers/sling plates. The buffer tube is compatible with regular M4/AR-15 stocks so you can customise this conversion kit to make it unique to you!

It is constructed from a durable alloy to ensure it can survive skirmishing and the buffer tube simply threads into the chassis, just make sure you know what you're doing before installation as to avoid damaging anything! So, if you fancy turning your under-barrel launcher into a stand-alone platform for some close-quarters domination, the EMG KAOS Conversion Kit For HAVOC Grenade Launcher is perfect for you!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

A 20mm mounted Russian tactical flashlight with an included pressure pad, designed to blind your enemies and provide you with the ultimate tactical illumination device to see you through your skirmish.

If you own a spring-powered SVD Dragunov, but you're missing the real wood furniture, then this conversion kit should interest you! The Battleaxe SVD Wood Conversion Kit contains a real wood stock and handguard, both of which have been meticulously crafted to ensure a superb and realistic finish. The varnish finish provides a subtle sheen with the wood grain that shows through, faux wood or polymer can never look this good!