All External Airsoft Parts & Attachments

If your CZ 805 is looking a bit battered, now may be the time to fix 'er up! The ASG Replacement Receiver Stock Hinge is a replacement original part for the ASG CZ 805 BREN AEG and is the part you need if your stock no longer locks into the deployed position. This is the receiver side of the stock mechanism and is constructed from high density polymer.

If your CM.041 SMG-5 has a loose or rattly charging handle, this might solve it! The CYMA Charging Handle Spring Catch for SMG-5 is a replacement original part for the CM.041 series and will work on the -SD models but not the -K. This part braces the spring inside the receiver and keeps your charging handle tight and in place. If you pull your charging handle back and there is no spring tension and the handle loosely wanders around in the cocking tube, you probably need a new one of these!

A KeyMod attachment for KeyMod Rails which provides a Quick Detach Sling Loop Mounting Point, making it easy to quickly add and remove slings from your rifle.

If you're rocking a Unity Fusion mount, the WADSN Offset Rail for Fusion Mounts should interest you! This CNC aluminium mount is compatible with Unity-style Fusion mounts and provides an offset 20mm Picatinny rail with 5 rail slots, ideal for flashlights and laser aiming modules. This rail mount is only compatible with Fusion style mounts and includes two steel bolts to mount it and the correct Allen key so you don't need to rummage in your toolbox!

If you are building a custom Hi-capa or 1911 GBB, whether it is for competition shooting or use as a primary pistol for skirmishing, a cocking lever can help speed up your reloads and get you back into the action faster! The CowCow Raw cocking handle is designed for the TM Hi-capa and 1911 GBB pistols and replaces your rear sight with a side-mounted cocking lever which can be installed for use by either left or right-handed users. This cocking handle is compatible with most TM clone GBB Hi-Capas but will only fit 1911s with a rear sight dovetail, not the classic style with the rear sight machined as part of the side.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

If you own an AK-47S underfolder AEG and you want to elevate its realism, a metal body kit is the key! The CYMA Metal Receiver for TM AK47S AEG is compatible with the CYMA CM.028S and Tokyo Marui AK-47S AEGs and will also fit others as long as they use the Tokyo Marui external design and have an underfolding stock.

The receiver is designed to match the original AK-47S "milled" receiver style, complete with weight-reducing cutouts at the front on either side, steel mock pins for some nice extra detail and engraved Cyrillic fire selector markings, an appropriate nod to realism. At the rear of the receiver, there are cutouts so an underfolding stock can be installed, and there are no conventional stock tangs on this receiver so it is not compatible with the full stock or side folding stock variants of the AK-47 AEG. If you want your AK-47S to be as its creator intended, this metal receiver kit is what you need!

If you want to make your AK a little more... AK. Then the LCT AK104 Flash Hider is for you! This flash hider is a replica of the real steel AK104 trumpet-style flash hider. It attaches to 24mm CW threading and is constructed from steel, giving it a hefty weight and a realistic feel. It has a wear-resistant finish and its sturdy construction ensures that it will survive more than its fair share of skirmish-related bumps.

To fit this flash hider on more common threads you will need a 24mm to 14mm thread adapter. Give your AK the classic look with a real steel-styled flash hider and keep your AK in the 20th century, right where it belongs.

An ultra low-profile and tough Flip Cap for Objective Lenses with an outside diameter of 50-59mm, which has 270° of motion so that your cover can sit vertically or sat back on the scope. This is the perfect way to protect your lens in style when your rifle is not in use or in transport/storage.

A rugged and flexible Eyepiece Lens Cover for Telescopic Scopes with an Eyepiece diameter between 41.5mm and 46mm (1.6-1.8"). It offers a dual position cap and weatherproof defence against the elements. Ideal for protecting your lenses during transport or storage.

A replacement for your Airsoft gun's standard flash hider, this compact 14mm CW threaded compensator is a small way to dramatically alter the appearance of your Airsoft gun. 

The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming. 

If you are looking for a way to mount a tracer unit to your AEP, this is what you're after! The 20mm Upper Rail with Thread Adapter is designed to fit the CM.030, CM.127 and ASG XP17 Challenger AEP pistols, and provides both a 20mm Picatinny upper rail and 14mm CCW male threads so you can dress your AEP up to impress!

The part is constructed from alloy and is finished in matt black, and adds a whole new look to your AEP with its angled ports at the front on either side, and weight reduced 20mm rail across the top. Those worried about losing their iron sights; fear not! The rail has a set of fixed backup iron sights built in, so if you aren't quite ready for a red dot sight you can still put rounds on target.

If your AK is equipped with an ALFA-style lower handguard, this is the upper handguard you need to complete the build! The 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards is CNC machined from aluminium and provides a 20mm Picatinny rail up top, ready for a laser, flashlight or any other 20mm rail-mounted accessory. 

This upper handguard is designed specifically to be paired with the 5KU ALFA lower handguard, mounting via the threaded holes along each side. The set also includes the screws you'll need to bolt your new upper handguard to your ALFA lower handguard. If your ALFA style lower handguard is looking a bit lonely, add the 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards to complete the look!

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

In an intense Airsoft skirmish the adrenaline is flowing, and often with that comes the loss of fine motor skills. If you have ever fumbled a reload at a critical time, you will know what we are talking about! The Aluminium Magwell Type 3 from Airsoft Masterpiece is intended to solve this issue by providing a helpful flared guide to assist you in getting that magazine into the gun quickly and with ease. The wide flare of this magazine well makes it perfect for speed reloads, either in a skirmish or an IPSC competition, and can be particularly useful under pressure!..

In an intense Airsoft skirmish the adrenaline is flowing, and often with that comes the loss of fine motor skills. If you have ever fumbled a reload at a critical time, you will know what we are talking about! The Aluminium Magwell Type 3 from Airsoft Masterpiece is intended to solve this issue by providing a helpful flared guide to assist you in getting that magazine into the gun quickly and with ease. The wide flare of this magazine well makes it perfect for speed reloads, either in a skirmish or an IPSC competition, and can be particularly useful under pressure!..

If you need something to support the weight of your sniper rifle or DMR setup, you can't go wrong with a Novritsch Harris Lug Rifle Bipod! This bipod is compatible with common Harris-style sling/bipod lugs found on the stocks of most sniper rifles, including the SSG10 A1 and A2. 

Constructed from strong aluminium with a steel sling loop built-in, this bipod boasts adjustable leg length via the pair of catches on each and the bipod feet are made from rubber for great gripping qualities. The legs can be deployed and stowed in an instant by pulling them into position. If you find yourself sniping from a static position more often than not, this bipod will be an asset to your setup!

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

If you own a CM.127, CM.127S or ASG XP17 Challenger and your mag release has gone missing or broken it's your lucky day! The CYMA Magazine Catch & Spring for CM.127 AEP is a replacement original parts set for the CM.127 and CM.127S AEPs but should also fit the ASG XP17 Challenger AEP. The set includes the mag catch itself and the spring.

If your ARCTURUS AK uses the MOE-style pistol grip and your base plate has gone walkies, here is the perfect replacement. The Pistol Grip Base Plate for AK-47/74 AEG is only compatible with ARCTURUS AKs which use the MOE-style pistol grip, as seen in the following example: ARCTURUS AK TWS AEG. The base plate is constructed from high density polymer, just like the original.

If you've lost a selector switch for your Thompson AEG, or even both, CYMA have you covered! The Selectors Set for CM.033/051 are packaged as a pair and are compatible with CYMA's Thompson AEGs, both the M1A1 and M1928 Chicago Typewriter variants. The selectors are constructed from alloy and finished in matt black.

If you've been in an intense firefight and your HASTA Nebula Gen.2 has taken some damage, this should sort it! The Replacement Front Cap for NEBULA Mist Tracer Unit Gen.2 is an original replacement part made from clear polymer, ideal for those who have a damaged front cap.

While a damaged front cap might not stop the Nebula from working, it will make the internals vulnerable to BB impacts. If you're particularly attached to your Nebula Gen.2, we recommend having one of these in the stash for a worst-case scenario!

If you're running a Delta Armory DA-P series EU17 GBB pistol and want to reload faster, this is the key! The Delta Armory Extended Magazine Catch for P-Series GBB is constructed from high density polymer, designed specifically for the DA-P series but potentially compatible with other Gen.3 style EU17 frames (no guarantees though!).

This extended magazine release features a textured surface for optimal grip in all weather and is much wider than the standard mag release, making it easier to reach for smaller hands. The set includes the entire mag release assembly other than the spring, though the original mag release spring used in the DA-P series is a perfect fit. A super affordable upgrade to make pistol handling much easier, this Extended Magazine Catch is just what you need to speed up your reloads!

A precisely engineered and uprated loading handle for the terrifying ASW338LM Airsoft sniper rifle from Ashbury Precision Ordnance.