All Airsoft Guns

If you're looking for a cheap and cheerful sidearm with more than its fair share of features, the Double Bell 304 Burgundy Viper Hi-Capa GBB Pistol should be right up your street! This full-metal Hi-Capa platform is based on a high-end real steel pistol we all recognise, rocking an optics-ready slide, front and rear slide serrations and a pre-installed compensator to complete the elite look.

Despite its very affordable price point, the Burgundy Viper is supplied in a wave foam equipped hard pistol case with a spare nozzle and a 20mm Weaver optics mounting plate included, giving you some elite features for one of the most affordable full metal Hi-Capa platforms on the market currently. If you're searching for high-end looks for an entry-level price, the Double Bell 304 Burgundy Viper Hi-Capa GBB Pistol is exactly that!

If you have your sights set on a sniper rifle but want something with a more militant look, the CM.702B M24 from CYMA is exactly what you need. This spring bolt action sniper rifle is based on the real steel M24 SWS, the US Army's standard sniper rifle and comes equipped with a 6.03mm tightbore inner barrel straight out of the box!

As far as affordable sniper rifles go, this is one of the most consistent we have seen, hovering around the 500 FPS mark on 0.2g BBs with only a couple of FPS deviation between shots. While it isn't based on the VSR-10 system, it is compatible with upgrade parts for the Classic Army CA/M24 but for all but the most particular snipers, upgrades shouldn't be necessary. Just slap a scope on top and get busy from your hide in the woods!

For those Hi-Capa fans who feel the need for speed, the Hi-Capa 5.1 High Speed Custom from Golden Eagle takes out of the box Hi-Capa performance to even greater peaks. The slide of this Hi-Capa has been reduced to practically nothing at all, giving it an incredibly fast cyclic rate with reduced recoil, resulting in a vast improvement in gas efficiency and shot to shot consistency. If you are the type of player who is all about performance, this Hi-Capa would be perfect for your needs, and would almost certainly excel with an HPA rig connected as it does with a standard green gas magazine. The skeletonised slide design and spiral fluted outer barrel would also appeal to those out there who appreciate the minimalist race-gun aesthetic.

If you're a fan of the Lycoris Recoil Anime TV series or appreciate sharp things, the AM.45 "Chisato" Detonics .45 GBB Pistol from Double Bell is what you need! Based on the custom Detonics .45 pistol carried by Chisato Nishikigi in Lycoris Recoil, the Double Bell "Chisato" AM.45 is a direct clone of the Tokyo Marui version and a near 1:1 match for the on-screen version. 

The AM.45 Chisato boasts full metal construction with a seriously sharp strike face compensator which Double Bell wisely chose to make from high-density polymer so no one gets hurt! The internals are all Tokyo Marui spec, meaning if you want more accuracy and range you can upgrade the HOP-up rubber and inner barrel easily, with other options available for the more technically proficient.

Whether you love a compact GBB pistol with a unique look or are a fan of Lycoris Recoil, the Double Bell AM.45 "Chisato" Detonics .45 GBB Pistol is a fantastic, affordable way to expand your collection!

A Gas Blowback Airsoft Pistol designed by WE Europe based off the 1911 Pistol Design, but in a more Compact form. The Pistol is constructed with an Alloy Frame, Slide, Internals and Magazine and with Polymer Grips.

For those of you looking to get into Airsoft, or start your sniper loadout, this could be gun for you.

Great out of the box, delivering a consistently high FPS, between 420-500fps. A Sniper rifle that can be used without any upgrades and features a lightweight ergonomic build, with a satisfying bolt action and tightbore barrel.

If you want a modern AK variant but you want it light for a fast moving playstyle, this one will do the trick! The SA-J72 from Specna Arms is designed to replicate the real steel AKS-74M, a modernisation of the AKS-74, the original side folding AK rifle. This AK uses the VFC style of external construction, meaning pins and rivets instead of screws, a skeleton side folding stock made from steel and as close as is possible to realistic disassembly with an AEG.

The SA-J72 weighs a mere 2.5kg approximately, and Specna gets away with this with a high density polymer receiver, gas tube and gas block which has the added benefit of increasing the rifle's resistance to scratches. We have been waiting for a modern AK in the featherweight category, and finally, it is here!

Looking for a decent all-rounder Airsoft AEG with an interesting backstory? The MC51 from Jing Gong may have what it takes! This AEG is based on the real steel MC51, a G3 based rifle designed by FR Ordanance in the UK and intended to replace the MP5 in service with the SAS. The rifle served with the SAS for a brief period before it was replaced with the much more sane HK53, a 5.56mm derivative of the G3. This was due to the uncontrollable recoil of the MC51, and though its mighty 7.62x51mm cartridge provided the power the SAS were seeking, it proved too much to make a practical close-quarters rifle. 

The MC51 may have left service in a hurry, but it still lives on in the form of customised G3 and HK91 rifles in the US, the land of the free and home of those who absolutely love hard recoiling rifles with blinding muzzle flash! 

If you are looking for a modern Hi-capa based build with speedy looks and surprising performance, keep your eye on the Golden Eagle Hi-capa 4.3 Dusty Snake! This full metal GBB pistol sports full Tokyo Marui compatibility, a 6.02mm tightbore inner barrel and an optics-ready slide with the common RMR mounting standard.

Boasting all the frills that make the modern Hi-capa platform such a competitive piece, the Dusty Snake is equipped with a stylish compensated front end, flared magazine well extension and even a hand-stippled grip; giving you exceptional gripping qualities whether you rock gloves to a skirmish or not. As a trusty sidearm or a primary pistol for CQB, you cannot go wrong with this remarkably affordable and beautiful gas blowback pistol!

A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more. 

A stubby Gas Blowback Airsoft pistol based on the Px4 pistol. The pistol features an Alloy slide with a Polymer frame, making the pistol lightweight but have a great kick.

6mm BB Pistol based on the modernised MEU 1911 design, combining a much-loved pistol with an element of modern flare and visual appeal to the design.

This Gas Airsoft Shotgun is fed by standard Airsoft Shotgun Shells and a removable Gas Tank, just like the Tokyo Marui M870 series. It is constructed from Full Metal, with the exception of a Polymer Pump Handle and Stock, as well as a Rubber Butt Pad. If you're looking for the most realistic Airsoft Gas Shotgun you can get your hands on without going for a shell-ejecting model, then you're in the right place.

Bridging the gap between the start of the 20th century and the start of the 21st, the War Hawk is Nighthawk Custom's take on an ultra-modern 1911, fully licenced by Red Wolf Airsoft. This pistol comes complete with advanced contemporary features, such as light-enhancing sights, a 20mm pistol rail and an extremely comfortable grip, complete with thumb indentation no less! Fashioned from glorious brushed aluminium and coloured in suave and sophisticated black, the War Hawk is for those of you that want to keep up with more modern pistols in spec ops missions and look cool as hell while doing it!

If you have an AK-shaped hole in your arsenal the Double Bell BY-023 AKM AEG should fill that void! This AK rifle replica has all the classic AK features any enthusiast of Kalashnikov's Automatic Rifle will appreciate, including real wood furniture, a large proportion of steel in its construction, authentic Russian markings and a mix of mock and real rivets in all the right places.

On the inside, the Double Bell AKM is equipped with a selection of internal upgrades to give it the edge over rivals in its price range, including a 6.05mm tightbore inner barrel, 8mm steel ball bearing bushings and a quick change spring system for easy power tuning with no need to open the gearbox. Whether you need a real wood and full metal AKM replica to complete your collection or to give the enemy team what for in a skirmish, the Double Bell BY-023 AKM AEG will see you well equipped in that unique Russian style!

If you dream of a 417-based DMR but are worried the incredible mass of the full metal options may compromise your in game agility, this is your dream come true! The Golden Eagle E6906 M-417 DMR is constructed almost entirely from high density polymer with an alloy outer barrel and buffer tube, making this big boy rifle as light as a feather.

Just like the full metal version, this high density polymer M-417 is equipped with an in-line MOSFET, 6.04mm tightbore inner barrel and quick change spring guide on the inside, giving you a head start when it comes to building your dream DMR with easy power tuning thanks to its quick change spring system.

On the outside, there may be far less metal than the full metal model but you have the same plethora of 20mm Picatinny rails, ergonomic pistol grip, 14mm CCW male threaded barrel and AR buffer tube paired with a 417 style wide profile stock. If you want a decked-out special forces style DMR without the ridiculous heft, this is the way to go!

A highly customised Airsoft 6mm BB Pistol based on the venerable 1911 design, combining rugged reliability with startlingly unique aesthetics. Most obviously is the aggressive Strike Face meat-tenderiser like Compensator, replacing the 1911s mundane muzzle with a far more imposing, brutal affair.

If you are a lover of classic assault rifles, you will have noticed the absence of this Swiss beauty in AEG form, especially in full metal AEG form. An oft-forgotten platform, the S-55x series are a great alternative to the wealth of AR15s and AKs used by the vast majority of skirmishers. Take the JG S-551 to a Airsoft site and you will turn heads, then when you start shooting you will turn tails!

This Gas Blowback Airsoft Pistol is a compact member of the Hi-Capa family, constructed from Full Metal, with an Alloy Slide, Frame and Magazine. This makes it very tough and realistic, whilst still retaining the awesome performance of the Hi-Capa Platform. This variant of the Pistol features several Vents on the Slide, Wave Grooves and Full Auto/Semi functionality, making it the perfect Sniper Backup or something to keep handy... for close encounters.

A replica of the MC51 rifle with a 20mm Picatinny railed handguard to give the old gun a fresh feel and bring it into the modern era. The Picatinny handguard allows mounting of all manner of accessories and the rifle comes complete with a receiver scope mount; this thing is just begging to be laden down with mission essentials!

If you like the iconic Dragunov SVD but you don't want a rifle a mile long, the SVD-S should suit your preferences! The CM.057S Dragunov SVD-S is constructed entirely from metal with a large proportion of steel parts and is a perfect replica of the SVD variant issued to Russian paratroopers and mechanised infantrymen, the SVD-S. The SVD-S has a shorter barrel and muzzle device than the original, and also has a pistol grip and folding stock at the rear instead of the SVD thumbhole stock. This is a Dragunov for the Airsoft marksman on the move!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 590mm inner barrel to make the SVD-S a great base platform for a DMR build. If you are after a long-range platform and want something with a folding stock for better portability, the SVD-S is the right tool for the job!

If you like your light machineguns to be...light, the Cybergun FN Herstal MINIMI® M249 PARA AEG; ETU Version fits the bill. This M249 MINIMI® LMG replica boasts official licencing from FN Herstal and is constructed primarily from high-density polymer to keep you agile in game.

This is the latest version of Cybergun's M249 AEG and is equipped internally with a version 2 gearbox with an in-line ETU/MOSFET to improve trigger response and rate of fire, a rotary HOP-up unit and 6.03mm tightbore inner barrel. Externally, this beast is based on the latest version of the M249 MINIMI®, rocking a 20mm Picatinny railed lower handguard and receiver, ready for modern optical sights, laser aiming modules, grips and bipods. If you like to move fast with a big gun, the Cybergun FN Herstal MINIMI® M249 PARA AEG; ETU Version is your ideal primary!

If you are planning a DMR build you have one more base gun to consider, thanks to ARCTURUS! The M4/AR-15 SPR Rifle boasts a lengthy 17.5-inch outer barrel and 15-inch M-LOK handguard, making it the perfect length for SPR/DMR duty. The M4/AR-15 SPR is remarkably light for a full metal rifle of its size and offers a wealth of accessory options with its M-LOK handguard and seamless handguard receiver rail integration, meaning if you want a huge optical sight you have plenty of room to mount it.

On the inside, the M4/AR-15 SPR is equipped with the same rock solid internals as ARCTURUS's other designs, with many parts which lend themselves to a DMR build already installed, including a 6.03mm tightbore inner barrel made from steel for extra rigidity. Whether you are keeping full auto for a proper SPR, or going for a high FPS DMR build and saying goodbye to the fun mode, the M4/AR-15 SPR is a great base gun for any long range oriented setup!

If you're looking for an affordable long-range AR with a unique modern look, the DA-A09 ALPHA™ from Delta Armory is one to watch. This M4/AR-15 AEG is based on real steel LVOA-style AR-15s, boasting a 16.2-inch outer barrel and handguard along with an equally long 6.03mm tightbore inner barrel, ideal for outdoor skirmishing or a DMR build. 

Inside the DA-A09, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's ALPHA™ line, including a 6.03mm tightbore inner barrel, CNC Type A trigger, rotary HOP-up unit and an upgraded piston, delayer chip and tappet plate from SHS.

The result of these premium parts is an AEG which shoots far better than one would expect for the price with full TM compatibility for the upgrade addicts. Whether you decide to wack a big scope on it and get to work or instead build it out into a fully-fledged DMR, the DA-A09 makes a fantastic outdoor skirmishing platform! 

If you're getting tired of the standard shaped M4/AR-15 platform the Zion Arms R15 should reignite your passion for the platform. This AEG is based on the real steel R&D Precision PW9 with its aggressive muzzle brake and dynamic looking M-LOK handguard but uses a unique 5.56-style receiver so you can use your existing M4/AR-15 AEG mags. The amazing build quality of this replica cannot be overstated; with a CNC machined 7075 T6 aluminium receiver and handguard, plenty of steel and gorgeous high density polymer furniture, the R15 weighs in at a mere 2.1kg despite its full metal construction.

While the externals are lightweight and speed-oriented, the internals take this theme to the next level. The inner barrel is a 6.03mm tightbore, meaning improved accuracy and consistency, the bushings are 8mm and equipped with ball bearings for friction-free performance and a smooth gearbox sound, and a high speed motor coupled with the advanced Zion Arms Nebula ETU/MOSFET provides its astonishing rate of fire and trigger response. The Nebula also allows you to program the trigger for burst mode, binary trigger and semi-auto only, giving the R15 what it needs to compete in the age of MOSFET-equipped AEGs!

If you're getting tired of the standard shaped M4/AR-15 platform the Zion Arms R15 should reignite your passion for the platform. This AEG is based on the real steel R&D Precision PW9 with its aggressive muzzle brake and dynamic looking M-LOK handguard but uses a unique 5.56-style receiver so you can use your existing M4/AR-15 AEG mags. The amazing build quality of this replica cannot be overstated; with a CNC machined 7075 T6 aluminium receiver and handguard, plenty of steel and gorgeous high density polymer furniture, the R15 weighs in at a mere 2.1kg despite its full metal construction.

While the externals are lightweight and speed-oriented, the internals take this theme to the next level. The inner barrel is a 6.03mm tightbore, meaning improved accuracy and consistency, the bushings are 8mm and equipped with ball bearings for friction-free performance and a smooth gearbox sound, and a high speed motor coupled with the advanced Zion Arms Nebula ETU/MOSFET provides its astonishing rate of fire and trigger response. The Nebula also allows you to program the trigger for burst mode, binary trigger and semi-auto only, giving the R15 what it needs to compete in the age of MOSFET-equipped AEGs!

If you have been planning to get yourself an AK and give it a full internal overhaul, why not save yourself the trouble? The SA-J02 EDGE™ from Specna Arms comes with a vast number of upgraded parts already installed, including an alloy HOP-up unit, flat HOP-up bucking, 6.03mm tightbore inner barrel and of course, the impressive Gate ASTER™ MOSFET.

Coupling these parts with the well regarded ORION™ reinforced version 3 gearbox leaves you with very little left to consider upgrading, and to top things off, the SA-J02 is constructed almost entirely from steel with well-finished real wood furniture, giving it the substantial feel in the hands that an AK should have. For a perfect replica AK-74 that shoots as good as it looks, you couldn't ask for better!

In the real world this rifle exists as a civilian-legal hunting rifle, based off the G36 platform which everyone loves so much, but is usually unable to acquire due to their limited Armed Forces/Law Enforcement accessibility. In the world of toy guns, this is an Airsoft electric powered 6mm fully automatic replica.

A highly realistic 'Military' model of the Cyber Gun FAMAS F1, which features a MOSFET and No-Magazine Detection to stop the gun from firing without the Magazine. The MOSFET stops the gun from firing every 25rnds to mimic the real capacity of the FAMAS, allowing you the best of using a High Cap Magazine, and getting to do realistic reloads in the field for maximum immersion.

If you like a sneaky-beaky setup, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG should suit your style perfectly. This M4/AR-15 AEG is an integrally suppressed design, meaning it has a suppressor pre-installed beneath the handguard, reducing the overall length and keeping the platform CQB-friendly. A unique design inspired by the real steel Q Honey Badger, the Amoeba AM-13 is about as unique as AR platforms get and makes a fantastic primary for a futuristic or ultra-modern loadout. 

Inside, we have a version 2 gearbox with an alloy shell and 18:1 steel gears and the EFCS MOSFET/ETU system which offers programmable fire modes via the Ares EFCS programming box(not included). The EFCS works using magnets to detect the cycle of the spur gear, ensuring your gearbox completes a full cycle each time the trigger is pressed. If you need a new AR platform with stealthy styling, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG; Full Length is exactly that!