- For AR36K/E Replicas
- Fires 40mm MOSCART Grenades
- Underbarrel Launcher w/handguard & ladder sights
If you need a gun on your gun so you can shoot while you shoot, the S&T G316 Grenade Launcher is ideal! This imposing piece of equipment is designed for AR36 platform Airsoft guns, and will install in place of your handguard to provide an awesome under barrel 40mm Grenade Launcher for you to effortlessly fire Airsoft MOSCART Grenades from underneath your Assault Rifle.
The included handguard is designed to replace either the K or the E (full-length) AR36 handguards, so if you want to add it to your AR36C you will most likely need a barrel extension to clear the handguard. If you want a serious firepower upgrade for your AR36, then the S&T G316 Grenade Launcher is just what you were looking for!
- Full metal construction
- 6.05mm Tightbore inner barrel
- Optics ready, threaded barrel with thread adapter
If you are looking for a compact GBB pistol with all the trimmings and a unique race gun look, the F1 Firerarms BSF-19B from EMG is definitely your style. This GBB pistol is based on the internal design of the EU series and is sized to match the EU19, making it great for carrying on a crowded belt setup and quicker to draw thanks to its shorter barrel and slide.
Unlike an EU19, the frame of the BSF-19B is constructed from aluminium with machined texture on the front and rear and slick sides to allow for grip tape to be added, improving balance and providing the high quality feel one would expect from an Airsoft replica of a high end race gun. The slide and outer barrel are also aluminium, and the slide is furnished with stylish ports across the design with an optics-ready cutout at the rear; ready for an RMR footprint red dot sight to be mounted without the need for any extra plates or mounts.
With a unique look, threaded barrel, optics-ready slide and a 20mm Picatinny frame rail, the F1 Firearms BSF-19B is perfect for those looking for a compact pistol ready to be fully decked out with all the mission essentials a modern sidearm requires to remain at the cutting edge!
- AR15-SMG.45 hybrid
- FALCON EFCS inside
- Ultra Modern Submachine gun!
If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the M917C Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and a side folding pistol stabilising brace style stock with a massive battery compartment. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.
- Full metal construction
- CO2 version - High power, not site legal
- Incredible for target shooting - BOOM!
If you're into competitive shooting with Airsoft guns or simply like to see beverage cans explode in the garden, this is the M870 for you! The Golden Eagle Type 870 M8874 Tactical Shotgun; CO2 Version hits out at a scary 400 FPS on 0.2g BBs approximately, meaning it isn't site-legal for skirmishing but makes a devasting target shooting platform with the added satisfaction of its awesome pump action mechanism and 3 or 6 shot fire modes.
This version is rocking an extended receiver rail with a built-in 5-shell "side saddle", allowing you to carry 5 extra shotshell magazines on the side of the platform, well placed for fast access in the heat of the moment. Amongst the extended rails other perks are an extra QD sling socket on either side at the front and plenty of space to mount accessories, including the pre-installed Troy-style flip up aperture iron sights.
Constructed with the same superb quality full metal exterior as the Green Gas version, the M8874 also boasts QD sling sockets on either side of the receiver and the set includes 2 QD sling swivels, ready for a two-point sling setup. If you'd love a shotgun but don't play much CQB, this CO2-powered menace would be the perfect backyard plinker!
- Full metal construction
- Unique WW2 sidearm
- Gas blowback recoil
If you're interested in the WW2 style but you want something a bit more unique, you can't go wrong with a Pistole 38 pistol! This iconic German sidearm looks like a PO8 dressing up as a 1911, and we love it. This pistol first went into production during WW2, intending to replace the P08 due to its increasing cost to produce.
The WE Pistole 38 GBB Pistol boasts a full metal construction, featuring an alloy outer barrel, frame and slide with a polymer pistol grip, matching the real steel proportions perfectly. If you're looking for the finishing touch for your WW2 loadout, the WE Pistole 38 GBB Pistol matches the era but is sure to stand out from the rest!
- Full metal construction
- Genuine Salient Arms trademarks
- Titanium nitride style SAI barrel
If realism is the primary concern for your loadout, this is the pistol for you! The EMG Salient Arms 2011 DS Hi-Capa 4.3 GBB Pistol features trademarks all over it, giving it the appearance of the real steel "SAI RED" that this Hi-Capa is based on. Its premium looks don't stop at the trademarks, it boasts a Titanium Nitride style SAI barrel, a subtle highlight that helps give this pistol the high-class looks that puts this pistol above the competition.
The pistol also comes equipped with a light-enhancing fibre optic front iron sight and combat-style rear sights, perfect for quick targeting whilst out on the battlefield. This is the perfect 2011 Hi-Capa for those who want to look classy on the battlefield, there's no easier way than with a real steel licensed pistol.
- Full Auto/Semi
- Full Metal Build
- Big Range of Colours
The Hi-Capa 6" Force A-2 is a series of Gas Blowback Airsoft Pistols built upon the Hi-Capa Platform, which means they have big gas reservoirs and work extremely well. They are also available in an absolutely huge range of colours and designs, which will be listed below. The main party trick of these Pistols is that they are Full Auto and Semi Automatic, making for an ideal Sniper Backup or Pocket Rocket for the aggressive Airsoft Player.
- S&T M320A1 40mm Grenade launcher
- 2 x NUPROL 40mm MOSCART Gas Grenades
- Weapon mounted or stand-alone launcher
If you are ready to up your Airsoft game, adding a grenade launcher to your arsenal is a sure way to have the enemy on the run! The US Grenadier M320 Bundle was put together to give milsim inclined Airsofters a ready-to-go 40mm grenade launcher set which can either be weapon mounted or used as a stand-alone launcher.
The package includes the S&T M320A1 40mm Grenade Launcher and 2 x NUPROL 40mm MOSCART Gas Grenades, leaving only the BBs to buy. Whether you are busting bunkers or dominating the corridors of your local CQB site, a 40mm launcher will be a true asset to your loadout!
- Full metal construction
- MOSFET & Microswitch trigger
- Licenced Angstadt Arms trademarks
If you have caught AR-9 fever (it's contagious!) but you want something realistic, and ultra-compact, EMG has something for you to take a look at! The Angstadt Arms SCW-9 is a modern AR-9 platform designed to be as compact as physically possible for concealability when used by close protection details and bodyguards and fortunately for us, this translates directly into a seriously competitive CQB platform that is probably the most compact option on the market right now.
This pocket-sized M4/AR15-derived submachine gun features full metal construction, a female threaded outer barrel complete with14mm CCW male thread adapter and an in-line MOSFET which pairs well with the microswitch trigger to provide a snappy response for some rapid double taps in CQB. All of the controls are either ambidextrous or extended, making for a familiar but enhanced feel for M4 users, and its innovative compact PDW stock makes this tiny boi barely bigger than a pistol. If you want the edge when it comes to challenging CQB scenarios, the SCW-9 would be a great choice!
- JG 0448A AU-1G AEG
- 2x Mid-cap mags, speed loader & BBs
- Battery, charger & Holo-551 red dot sight
If you want to stand out from the M4-wielding hoards, why not try an AUG? The Jing Gong Ultimate AUG Bullpup Bundle includes everything you need to get stuck in with this legendary Austrian platform in its modernised form!
The set includes the Jing Gong 0448A AU-1G AEG, 2 extra mid-cap magazines, a 100rnd Speed Loader, a 1KG bag of Delta Armory 0.25g BBs and a 551 style Red Dot sight. Also included is a Ni-Mh battery, charger, and safe charging bag. Take a walk on the wild side with an exciting and lesser seen platform!
- Sawn-off style
- M-LOK style handguard
- Shell ejecting - Realistic & super fun
If you want to ride a Harley Fatboy into your next Airsoft skirmish in some futuristic alternative timeline quoting something along the lines of "I'll be back." then this lever action shotgun is exactly what you need. It's a more modern take on the Winchester 1887, boasting quality-of-life upgrades such as an M-LOK handguard and shotgun bead-style iron sites.
This Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate and long-range shots. This lever-action is equipped with a fixed stock made from real wood, an aggressive muzzle choke and a 2-shell holder making it a fantastic CQB platform for future wasteland load-outs and space-age Cowboys.
If you have unique tastes and enjoy watching the shells tumble on the ground every time you rack the lever, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Space Shorty will give you the thrilling, unique experience you crave!
- Sawn-off style
- M-LOK style handguard
- Shell ejecting - Realistic & super fun
If you want to ride a Harley Fatboy into your next Airsoft skirmish in some futuristic alternative timeline quoting something along the lines of "I'll be back." then this lever action shotgun is exactly what you need. It's a more modern take on the Winchester 1887, boasting quality-of-life upgrades such as an M-LOK handguard and shotgun bead-style iron sites.
This Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate and long-range shots. This lever-action is equipped with a fixed stock made from real wood, an aggressive muzzle choke and a 2-shell holder making it a fantastic CQB platform for future wasteland load-outs and space-age Cowboys.
If you have unique tastes and enjoy watching the shells tumble on the ground every time you rack the lever, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Space Shorty will give you the thrilling, unique experience you crave!
- Sawn-off style
- M-LOK style handguard
- Shell ejecting - Realistic & super fun
If you want to ride a Harley Fatboy into your next Airsoft skirmish in some futuristic alternative timeline quoting something along the lines of "I'll be back." then this lever action shotgun is exactly what you need. It's a more modern take on the Winchester 1887, boasting quality-of-life upgrades such as an M-LOK handguard and shotgun bead-style iron sites.
This Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate and long-range shots. This lever-action is equipped with a fixed stock made from real wood, an aggressive muzzle choke and a 2-shell holder making it a fantastic CQB platform for future wasteland load-outs and space-age Cowboys.
If you have unique tastes and enjoy watching the shells tumble on the ground every time you rack the lever, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Space Shorty will give you the thrilling, unique experience you crave!
- Impressive Realism
- Anodised Handguard
- CNC Aluminium / Billet
A MK18 Platform Airsoft Electric Gun with a strong and well-constructed external shell, including CNC Machined Billet Outer Barrel and Anodised CNC Machined Aluminium Handguard. The Gearbox contains a wealth of up-rated goodies such as a 6.01mm Inner Barrel and Reinforced Steel Gears, meaning it shoots just as good as it looks.
- Full metal construction
- 6.02mm Tightbore inner barrel
- Japanese WWII light machine gun
If you are working on your Japanese WWII kit and support gunning is your game, this is the primary for you! The Golden Eagle Type 96 LMG replicates the Nambu Type 96, the standard light machine gun of the Imperial Japanese Army throughout most of WWII. The Golden Eagle replica boasts full metal construction, real wood furniture, a whopping 550mm 6.02mm tightbore inner barrel and a unique gearbox with version 2 compatible internals.
While visually similar to the BREN gun with its top-mounted magazine, the Type 96 is a different beast, using a different internal system than the BREN despite looking related. Like the BREN, the Type 96 is known to be one of the best LMGs of WWII thanks to its low weight, impressive accuracy and excellent design, making it a far more user-friendly platform than the American BAR.
To aid its role as a support platform, the Type 96 is equipped with a folding bipod which is a true asset when setting the LMG up in a fixed firing position, giving you the ability to tilt the LMG to keep it horizontal for better HOP-up effect and a more comfortable firing positon. If your tastes dictate a unique historical platform or you are working on your WWII ImperialJapanese Army loadout, the Type 96 will scratch that itch!
- Fully Licenced by FN Herstal
- Krytac in-line MOSFET pre-installed
- Alpine Limited Edition - New colour & new upper receiver!
Following in the footsteps of the Krytac Kriss Vector Alpine Edition we are proud to introduce the Krytac EMG P90; Alpine Special Edition. This unique P90 variant has an eye-catching new look and brings plenty of modern functionality to the table as a bonus thanks to its redesigned modular upper receiver/optics bridge assembly. As with the original Krytac P90, this variant boasts full licencing from FN Herstal via Cybergun, but unlike the original, this P90 takes a walk on the wild side when it comes to external design!
Inside we are treated to the best the P90 platform has to offer, just like the previous P90 from Krytac. The trigger has been enhanced and now has a super short trigger travel with full adjustability, the upgraded internals are kept in check by the Krytac Nautilus MOSFET and a 30K RPM high torque motor delivers the power needed to provide a super snappy trigger response and a remarkable rate of fire. If you like your P90s minty fresh on the outside and a cold killer on the inside, this one should suit you!
- Full metal construction
- Licenced by Daniel Defense
- Based on the TM ZET GBBR System
If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.
Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.
If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!
- Full metal construction
- Licenced by Daniel Defense
- Based on the TM ZET GBBR System
If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.
Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.
If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!
- Full metal construction
- Licenced by Daniel Defense
- Based on the TM ZET GBBR System
If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.
Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.
If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!
- Ambidextrous controls
- 11.1V LiPo battery ready
- 5x 6.03mm Tightbore inner barrel
If you want to ensure victory, you need this. The WELL PRO WE23-Plus Rotary Minigun is part of its "PRO" line of high-end AEGs. This Airsoft Minigun is constructed primarily from high-density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 2800rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!
On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tight bores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design for each barrel to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!
The Well Minigun has the very real potential to change the game, with an incredible fire rate on an 11.1V LiPo battery and a monstrous 2800rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!
- Full Alloy Construction
- 40mm Moscart Launcher
- Fits 20mm Rail & M16 Barrel
A full metal M203 style Airsoft Grenade Launcher by Double Bell, designed to fit onto either a 20mm RIS rail or the underside of your M4A1 / M16 this 203 launcher adds a uniquely menacing look to your gun!
- Full metal construction
- 6.03mm Tightbore inner barrel
- 12mm CW threaded barrel w/ 14mm CCW adapter
If you want something a bit more stylish as a sidearm, VORSK must have come to your attention by now! The EU18 Gold Match GBB pistol follows the usual VORSK formula of taking a tried and tested GBB pistol design and spicing it up with some key aesthetic changes. The EU18 Gold Match follows the same external design as its EU18 Solid slide but with matt gold accents, making the pistol stand out and giving it the classy looks of a decked-out race gun.
As with VORSK's other EU-series offerings, the EU18 Gold Match is compatible with common EU series magazines from VORSK, RAVEN or WE and is kitted out with a 6.03mm tightbore inner barrel straight out of the box, promising improved accuracy potential and a slight raise in FPS when compared to its rivals. If you seek a more elegant looking EU series which sidesteps the usual pedestrian EU series looks, the EU18 Gold Match would be a fine choice!
- Full metal construction
- Real wood & Rubber grips - Redwood Stained
- 6.03mm Tightbore inner barrel
If you love that competition styling in a sidearm but don't have a thousand quid in your pocket, VORSK is here to make your dreams a reality! The CS Defender Pro 1911 GBB Pistol is styled after real steel competition-optimised handguns and comes with a built-in compensator, flared magazine well, ported slide and gorgeous real wood/rubber hybrid grips pre-installed.
Building on VORSK's pedigree of offering some seriously slick full metal GBB pistol designs in an affordable package with loads of spare bits included, the CS Defender gives you the option of running it in either compensated or combat configurations. In the latter state, it is compatible with 12mm CW female thread adapters so you can equip it with a tracer unit for some CQB intimidation and an instinct-aiming advantage. Whether this is your first sidearm or you want something to compliment your collection that has a bit more flare and head-turning good looks, the CS Defender Pro should do the job, and do it well!
- High-density polymer/CNC alu handguard
- 6.03 Tightbore inner barrel
- HAL¹ ETU Pre-installed - Programmable fire modes
This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!
This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.
- Custom Slide
- Flared Magwell
- Threaded Barrel
A gas blowback 6mm Airsoft BB Gun, based on the Hi-Capa 3.8 range this is a custom pistol designed to look as unique and modern as possible whilst still retaining all of its key features.
- Alloy Slide
- Red dot sight pre-installed
- Gas Blowback Airsoft Pistol
A Gas Blowback RAVEN F226 Airsoft Pistol, featuring an alloy slide, a 20mm underside rail accompanied by a tactical RMR ( Rear Mounted Red Dot ) This Airsoft Pistol is every Tactical Timmy's dream. Acquire your targets with speed, precision and accuracy all while looking cool AF because with this Raven 226 you're set for skirmish.
- Programmable ETU pre-installed
- High density Carbontech polymer receiver
- 6.01mm Tightbore inner barrel
The Italian brand Evolution Airsoft has made a name for itself by providing pre-upgraded AEGs with superb quality externals, giving Airsofters what we always wanted; a gun we don't have to mess with! Though some live for the "thrill" of installing upgrades and hoping they work, for the rest of us, Evolution Airsoft has come through once again! The Smart Airsoft Gun series features the same impressive internals and rock solid externals as previous Carbontech AEGs, but with the new and improved ETS II installed. This AEG is the XS version of the Ghost EMR, optimised for CQB and aggressive playstyles.
- High-density polymer/CNC alu handguard
- PDW style stock
- HAL¹ ETU Pre-installed - Programmable fire modes
Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for! It's more compact than the original SA-C25 with its PDW stock, perfect for staying versatile on the battlefield.
This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!
Based on the iconic Steyr AUG carbine, this compact 6mm BB Airsoft gun is a lightweight and compact electrically powered replica AUG. Realistically constructed from polymer with an alloy front end, the AUG is supplied with an aluminium foregrip.
- Full metal construction
- Single shot - 400 FPS +/- 10%
- 6.03mm Tightbore inner barrel & TDC HOP-up
If you like a challenge in game, this will certainly give you that! The S&T ST870 Marine Magnum is a single-shot pump action shotgun boasting full metal construction, a 6.03mm tightbore inner barrel, a TDC HOP-up unit and 400 FPS +/- 10% out of the box. "But why on earth would I want a single-shot, high FPS shotgun?" we hear you ask...
The ST870 may not be your CQB platform of choice, but it fulfils a different role. This shotgun is intended to simulate a real M870 shotgun firing 12 gauge slugs which are a single, solid projectile intended for long-range engagements and hunting. This means the ST870 falls into the same class as DMRs and Sniper Rifles when it comes to skirmishing, with the added challenge that there are no iron sights or rails to be found. If you are finding skirmish life a bit too easy with a sniper rifle, the ST870 will make you work even harder but give you even more satisfaction when you land the kill!