Guns Featuring MLOK Rail

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you have a thing for modernised AKs, you'll love this! The CYMA Platinum SLR Airsoft Works AK-105 AEG is absolutely packed with pre-upgraded parts and is officially licenced by SLR Rifleworks with detailed replicas of SLR parts across the design. This modernised AK-105 is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery. This means you can light the enemy up with tracer BBs without adding any extra length or weight to your gun, adding in a rare innovation usually only found on the aftermarket and requiring a certain amount of expertise to wire in. Inside the V3 gearbox, it gets even better!

With pre-installed 13:1 high speed CNC steel gears, a CNC aluminium piston head and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, there is practically nothing left to upgrade on this beast! Also inside this, the latest version of the SLR AK-105 we are treated to the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Make no mistake, this beast is even more kitted out than the previous version!

If you held off on the original SLR AK-105 from CYMA, the EShooter Kestrel Basic ETU version will make you glad you waited! Retaining all the best bits of the original but with advanced functionality added, the CYMA Platinum SLR Airsoft Works AK-105 AEG; Kestrel Basic ETU is a real killer on the field!

If your next build will be a beast of a DMR, the East Crane EC-903 SR-25 PC DMR AEG; Advanced Edition would make a fine base gun! Mechanically pre-locked to semi-automatic only and equipped with internals ideal for DMR conversion, the EC-903 boasts full metal construction and fantastic attention to detail, inspired by the most recent SR-25 DMR variant, known as the SR-25 PC (Precision Carbine).

On the outside, the EC-903 Advanced is rocking a CNC aluminium URX4-style M-LOK handguard, KAC-inspired QDC flash hider and ambidextrous 20mm Picatinny railed receiver, QD sling sockets throughout the build and an AR-15 AEG spec buffer tube at the rear, pre-fitted with a high quality Crane stock replica. Inside, we're treated to the Version 2 long gearbox, featuring a long polymer piston with a full steel tooth rack, long type 0 cylinder, 18:1 steel gears running on 8mm ball-bearing bushings and a quick change spring guide for easy power tuning. The inner barrel is also a 6.04mm tightbore, offering enhanced accuracy and a slight FPS boost from the same strength spring.

If your DMR build needs to be modern, metal and menacing, the EC-903 SR-25 PC DMR AEG; Advanced Edition from East Crane is the way to go! With the prerequisite .308 style DMR looks to set it apart from standard AR-15s, modern furniture ready to be customised and internals with plenty of pre-upgrades thrown in, the EC-903 is ready to harass the enemy team at long-range!

If you've been holding your breath waiting for KRYTAC's MK3 line to drop, you can breathe a sigh of relief! The KRYTAC EMG BARRETT REC7 MK3 Carbine AEG is the latest REC7 platform release, maintaining the incredible external build quality which made them the base platform for Bolster Armouries incredible ONYX with newly refined internals to squeeze even more performance from KRYTAC's proven components!

*Note that this platform is not provided with the optic shown in the example images

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you're in the market for a lightweight AR build with ultra-modern styling and advanced internals, get eyes on the Delta Armory DA-C11-EGL CHARLIE™ 10" M-LOK SilentOps M4/AR-15 AEG. This CHARLIE™ line AEG is made predominantly from robust high-density polymer with an alloy outer barrel, and if you squint, it looks a lot like the Royal Marines' latest service rifle, known as the "KS-1" or L403A1!

Inside, things get even better! The pre-installed EAGLE™ MOSFET/ETU transforms this already impressive little beast with a range of programmable fire modes, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only, adjustable precocking and adjustable trigger sensitivity. Being electronic, the trigger will never suffer a dreaded semi-auto lockup, making the DA-C11-EGL a fantastic CQB tool for fire supremacy. When it comes to outdoors, this slick AR platform ain't no slouch. The pre-installed 6.03mm tightbore inner barrel and rotary HOP-up unit ensure it can reach out and give the enemy team a hard time at long range!

A great value option at barely more money than the original DA-C11, this is the ideal version to go for if you want the versatility of using burst mode one game, semi-only the next without the tech knowledge to install a programmable MOSFET yourself. Whether you're fresh to the hobby and want to start with a very competitive platform or you need a lightweight backup for your full metal platforms to keep the pace up late in the skirmish day, you'll be set to dominate with the Delta Armory DA-C11-EGL CHARLIE™ 10" M-LOK SilentOps M4/AR-15 AEG by your side!

If you're in the market for a lightweight AR build with ultra-modern styling and advanced internals, get eyes on the Delta Armory DA-C11-EGL CHARLIE™ 10" M-LOK SilentOps M4/AR-15 AEG. This CHARLIE™ line AEG is made predominantly from robust high-density polymer with an alloy outer barrel, and if you squint, it looks a lot like the Royal Marines' latest service rifle, known as the "KS-1" or L403A1!

Inside, things get even better! The pre-installed EAGLE™ MOSFET/ETU transforms this already impressive little beast with a range of programmable fire modes, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only, adjustable precocking and adjustable trigger sensitivity. Being electronic, the trigger will never suffer a dreaded semi-auto lockup, making the DA-C11-EGL a fantastic CQB tool for fire supremacy. When it comes to outdoors, this slick AR platform ain't no slouch. The pre-installed 6.03mm tightbore inner barrel and rotary HOP-up unit ensure it can reach out and give the enemy team a hard time at long range!

A great value option at barely more money than the original DA-C11, this is the ideal version to go for if you want the versatility of using burst mode one game, semi-only the next without the tech knowledge to install a programmable MOSFET yourself. Whether you're fresh to the hobby and want to start with a very competitive platform or you need a lightweight backup for your full metal platforms to keep the pace up late in the skirmish day, you'll be set to dominate with the Delta Armory DA-C11-EGL CHARLIE™ 10" M-LOK SilentOps M4/AR-15 AEG by your side!

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

The Italian brand Evolution Airsoft has made a name for itself by providing pre-upgraded AEGs with superb quality externals, giving Airsofters what we always wanted; a gun we don't have to mess with! Though some live for the "thrill" of installing upgrades and hoping they work, for the rest of us, Evolution Airsoft has come through once again! The Smart Airsoft Gun series features the same impressive internals and rock solid externals as previous Carbontech AEGs, but with the new and improved ETS II installed. This AEG is the XS version of the Ghost EMR with the Evolution Airsoft PDW stock installed, making this the most compact offering in the Ghost EMR range and would be a great choice for those looking for a small Airsoft gun that is easy to transport but doesn't compromise on performance.

If you want to ride a Harley Fatboy into your next Airsoft skirmish in some futuristic alternative timeline quoting something along the lines of "I'll be back." then this lever action shotgun is exactly what you need. It's a more modern take on the Winchester 1887, boasting quality-of-life upgrades such as an M-LOK handguard and shotgun bead-style iron sites.

This Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate and long-range shots. This lever-action is equipped with a fixed stock made from real wood, an aggressive muzzle choke and a 2-shell holder making it a fantastic CQB platform for future wasteland load-outs and space-age Cowboys.

If you have unique tastes and enjoy watching the shells tumble on the ground every time you rack the lever, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Space Shorty will give you the thrilling, unique experience you crave!

If you want to ride a Harley Fatboy into your next Airsoft skirmish in some futuristic alternative timeline quoting something along the lines of "I'll be back." then this lever action shotgun is exactly what you need. It's a more modern take on the Winchester 1887, boasting quality-of-life upgrades such as an M-LOK handguard and shotgun bead-style iron sites.

This Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate and long-range shots. This lever-action is equipped with a fixed stock made from real wood, an aggressive muzzle choke and a 2-shell holder making it a fantastic CQB platform for future wasteland load-outs and space-age Cowboys.

If you have unique tastes and enjoy watching the shells tumble on the ground every time you rack the lever, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Space Shorty will give you the thrilling, unique experience you crave!

If you want to ride a Harley Fatboy into your next Airsoft skirmish in some futuristic alternative timeline quoting something along the lines of "I'll be back." then this lever action shotgun is exactly what you need. It's a more modern take on the Winchester 1887, boasting quality-of-life upgrades such as an M-LOK handguard and shotgun bead-style iron sites.

This Golden Eagle M1887 is powered by green gas stored in an internal reservoir which is well concealed inside the action. Each shell can hold 1-3 BBs, meaning you have the choice of a shotgun-like spread or loading a single BB for more accurate and long-range shots. This lever-action is equipped with a fixed stock made from real wood, an aggressive muzzle choke and a 2-shell holder making it a fantastic CQB platform for future wasteland load-outs and space-age Cowboys.

If you have unique tastes and enjoy watching the shells tumble on the ground every time you rack the lever, the Golden Eagle M1887 Gas Shell Ejecting Lever-Action Shotgun; Space Shorty will give you the thrilling, unique experience you crave!

If you're sick and tired of seeing the usual M4 and AK variants, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) should excite you! This interesting and unique bullpup design is based on a real steel prototype designed in Germany by Otto Repa, known as the SOC SLR. This variant is the AR-SOC, the assault rifle variant and is the ideal primary to pair with a sci-fi-style loadout which requires a plausibly realistic platform which doesn't look like any rifle issued in the current day.

Inside, we have a unique gearbox shell with wide parts compatibility with version 2 gearbox internals. The Ares EFCS MOSFET is also present inside, allowing for the AR-SOC's super satisfying 2-round burst mode and super snappy trigger response. The EFCS also provides programmable fire modes through the Ares EFCS Programming Box (available separately) and also provides cycle control, meaning you'll never get a trigger lockup with the AR-SOC no matter how fast you pump out those semi-auto shots.

We think the AR-SOC would be a fantastic stand-in for the Helldivers 2 Liberator assault rifle but also looks straight out of Halo! If your next move is to build a mould-breaking sci-fi loadout, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) is the perfect primary!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you're looking for an Airsoft bundle based around one of the best M4 AEGs on the market, you just found one! The KRYTAC REC7 Premium Primary Pack; Carbine includes the KRYTAC Barrett REC7 Carbine AEG, 2 extra mid-cap magazines, a holographic style red dot sight from Guerilla Tactical with a Ghost 3x Flip to side magnifier. The set also includes the HASTA Extra Large Wheeled Rifle Case, giving you a nice home to store your new premium primary!

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

The Italian brand Evolution Airsoft has made a name for itself by providing pre-upgraded AEGs with superb quality externals, giving Airsofters what we always wanted; a gun we don't have to mess with! Though some live for the "thrill" of installing upgrades and hoping they work, for the rest of us, Evolution Airsoft has come through once again! The Smart Airsoft Gun series features the same impressive internals and rock solid externals as previous Carbontech AEGs, but with the new and improved ETS II installed.

If you want to ensure victory, you need this. The WELL PRO WE23-Plus Rotary Minigun is part of its "PRO" line of high-end AEGs. This Airsoft Minigun is constructed primarily from high-density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 2800rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tight bores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design for each barrel to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible fire rate on an 11.1V LiPo battery and a monstrous 2800rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

If you're in search of a close-quarters-optimised M4/AR-15 AEG on a budget, you've found one of the best options with the DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG from Delta Armory! A lightning-fast density polymer build with an alloy outer barrel and steel sling plate, the DA-C14-EGL is also rocking the EAGLE™ programmable MOSFET inside, giving it advanced functionality way beyond its price point!

Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the DA-C14-EGL far more long-range effect on target than one might expect for such a compact primary!

If you like to move fast and need a platform to match or you're a CQB specialist needing to cut tight corners, you're in great hands with the Delta Armory DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG at your side. Packed with pre-upgraded parts and based on Tokyo Marui's proven internal design, the DA-C14-EGL is affordable, reliable and ready when you are!

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for! It's more compact than the original SA-C25 with its PDW stock, perfect for staying versatile on the battlefield.

This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're all about full metal ARs with an ultra-modern exterior, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is one to watch! A revamped version of the original Platinum CM.097F, this version keeps the ultra-speedy pre-upgraded gearbox internals of the original and adds advanced functionality into the mix via the pre-installed EShooter Kestrel V2 Basic MOSFET/ETU.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

A pre-upgraded AR AEG for cutting corners tight up close, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is a solid choice for CQB players or those who appreciate a compact build with superb handling. With a trigger response which is hard to beat, compatibility with 11.1V LiPo batteries and high-speed internals refined with the addition of the Kestrel Basic ETU, this latest CM.097F is CYMA's gift to the CQB specialist or fast moving woodland warrior!

If you held off on the original WE06 PPK-20 because of its lack of steel, the WELL PRO WE06 PPK-20 Compact SMG AEG w/ Eshooter MOSFET; Full Metal is the one to go for! Based on the most recent prototype of the PPK-20 SMG, an AK-derived SMG design, the WE06 boasts both M-LOK and 20mm Picatinny accessory attachment interfaces, ambidextrous fire controls and a side folding retractable stock based on that of the AM-17, another advanced Kalashnikov Concern prototype.

This, being the "full metal" version is also rocking a steel flash hider and a steel trunnion block along with a stamped steel receiver and top cover, giving it the appropriate hefty feel for the authentic replica experience. Inside, we have a unique version 3 gearbox-derived shell with a quick change spring system, a steel 18:1 ratio gearset running on 8mm slide bearings, a type 2 cylinder, a polymer piston with a full rack of steel teeth and an EShooter programmable MOSFET to top it off. The EShooter 'FET provides electrical efficiency improvements, battery protection and cycle completion along with programmable fire modes and adjustable pre-cocking. If you love the styling of the WE06 PPK-20 Compact SMG but have been waiting for the full metal version, here you go!

If you like the looks and ambidextrous functionality of the ARCTURUS E3 Rifle but you prefer a shorter package, the E3 Carbine is the same thing but with a 10.5-inch outer barrel, making it ideal for close-quarters use, and those who like to play aggressively and close ground with the enemy! Like the E3 Rifle, the E3 Carbine boasts full metal construction, well thought out pre-upgraded ARCTURUS internals, an intimidating looking compensator and M-LOK/Picatinny hybrid handguard up front.

The impressive internal spec includes a 6.03mm steel tightbore inner barrel, rotary HOP-up unit, microswitch trigger and a thoughtfully built gearbox with low friction components. The E3 Carbine is perfect for any aggressive player who wants all the options when it comes to accessories, and will make use of the wealth of QD sling points across this modern M4/AR-15 platform!

If you're after an ultra-modern full metal AR build packed with pre-upgraded goodies, the Specna Arms SA-P28 PRIME™ Daniel Defense® RIII™ 12.5'' M4/AR-15 AEG should be right up your street! This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

If you're sick of upgrading AEGs and want something that shoots flawlessly straight out of the box, the Specna Arms SA-P28 PRIME™ Daniel Defense® RIII™ 12.5'' M4/AR-15 AEG is perfect for you! Why not save yourself the hassle of fiddling with internal parts and save that energy for game day?

If you have a thing for modernised American AKs, this one should be up your street! The EMG Rifle Dynamics RD-701 AEG; Kestrel Basic ETU is absolutely packed with pre-upgraded internal parts and boasts licensed trademarks from Rifle Dynamics with detailed replica Rifle Dynamics parts across the design. Boasting some incredible pre-upgraded parts from the CYMA Platinum Edition rifles, this AK variant is absolutely devasting in-game and to make matters all the sweeter is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery.

The tracer HOP-up is a rare addition to stock Airsoft rifles, usually a rare innovation only found on the aftermarket and requiring a certain amount of expertise to wire in. An impressive feature made even better in combination with this RD-701's other upgraded parts and flawless build quality. The RD-701 boasts full metal construction with a large proportion of steel in the build, a 6.03mm tightbore inner barrel, a high-speed Neodymium magnet motor and much, much more!

so, if you fancy treating yourself to an AK platform, the EMG Rifle Dynamics RD-701 AEG is a great high-performance option, plus, its party trick of lighting up tracer BBs without an aftermarket tracer unit required!

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

If you're looking for a longer platform for outdoor skirmishing with no compromise when it comes to agility, check out the G&G Armament PRK9L Draco PCC AEG! Boasting full metal construction and a unique AK-based external design, the PRK9L is inspired by real steel Pistol Caliber Carbines popular in the 3-Gun competition sphere. Naturally, handling is impeccable, with all the ergonomic pitfalls of the AK truly cured, extended fire controls for speedy manipulation and an ultra-light extended M-LOK handguard well suited to modern shooting stances.

Inside, we're equipped with the proven G&G GT Advanced series internals, making the PRK9L 11.1V LiPo-ready straight out of the box. The gearbox shell is alloy and well-machined throughout, the 18:1 steel gearset runs on 8mm ball bearing bushings and the whole setup is driven by the renowned G&G Irfit 25K Orange high-speed motor, resulting in a super-snappy trigger response and way above average rate of fire. G&G's programmable MOSFET/ETU system also features inside, ensuring your electrical components run at maximum efficiency and offering the option to run 3-round burst mode instead of full auto.

As far as AK platforms go, the PRK9L is utterly unique, feeding from 9mm style magazines with sleek styling we're surprised an AK-derived design can pull off. If you need a real head-turner of a primary with killer performance and loads of accessory options, you can't go wrong with the G&G Armament PRK9L Draco PCC AEG!