Guns Featuring RIS/RAS Rail

If you have a Hi-Capa-shaped hole in your heart and are seeking a realistic experience, the EMG R611-3 STACCATO 2011 Hi-Capa P GBB is what you need. This full-metal Hi-Capa platform is a perfect replica of the real steel STI/STACCATO Firearms 2011 P, complete with licensed trademarks across the design in engraved, laser engraved and embossed form, very fancy.

As one might expect with such a high-end real steel pedigree, the STACCATO is kitted out externally with a raised light-enhancing front sight paired with an anti-glare rear sight, a red dot mounting plate for RMR footprint red dot sights, a flared magazine well and slide serrations at both the front and rear. From a handling standpoint, this thing is top-tier!

Internally, the STACCATO P is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. If you'd love to run a Hi-Capa with premium styling and stand out from the crowd, the R611-3 STACCATO 2011 Hi-Capa P GBB from EMG belongs in your loadout!

A Full Metal Airsoft Shotgun which is Tri-Burst and Spring Powered, meaning it will throw 3 x BBs down range towards your target with each pump of the Shotgun (and pull of the trigger). This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail.

Due to the Rubber texture of the body of this gun it can not be 2 toned

This Spring Powered Bolt Action Rifle is a super lightweight and quiet Airsoft Sniper Rifle that is based on the TM VSR; so much so that it is compatible with all Tokyo Marui VSR upgrades such as PDI and Prometheus brands. The externals of the Rifle feature a Rubberised Polymer which feels very different to your average replica and helps achieve a really realistic and eye-catching finish.

The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the Airsoft GLOCK 19X. If you're a firearm fanatic who's mad about getting as close to the real deal as possible, you've come to the right place.

The CYMA CM.121S is a replica of the fearsome Desert Eagle in Airsoft Electric Pistol form with a twist. This AEP is built around a MOSFET which leaves you with a savage Rate of Fire and much higher performance than a normal AEP.

A perfect starter pistol for those starting their Airsoft journey, or a budget friendly sidearm for those times your primary is empty and you find yourself in a pinch!

This electric Airsoft 6mm BB gun, is designed to be easy to use, and even features a MOSFET and adjustable gear Hop-up.

The CM.125S pistol is constructed with an alloy mock slide and polymer frame; Lightweight and efficient at both semi and full auto, this pistol has everything you need to get you into Airsoft skirmishing.

A perfect starter pistol for those starting their Airsoft journey, or a budget friendly sidearm for those times your primary is empty and you find yourself in a pinch!

This electric Airsoft 6mm BB gun, is designed to be easy to use, and even features a MOSFET and adjustable gear Hop-up.

The CM.125S pistol is constructed with an alloy mock slide and polymer frame; Lightweight and efficient at both semi and full auto, this pistol has everything you need to get you into Airsoft skirmishing.

The CYMA CM.121S is a replica of the fearsome Desert Eagle in Airsoft Electric Pistol form with a twist. This AEP is built around a MOSFET which leaves you with a savage Rate of Fire and much higher performance than a normal AEP.

If you are after a unique and affordable Airsoft AEG submachine gun, the Double Eagle M89A fits the bill! This AEG sports full metal construction, and its nearly 100% fibre reinforced polymer construction matches the real thing in almost every way. This AEG has a compact front end bristling in 20mm Picatinny rails, making it ready for any accessories you want to mount, and boasts as well designed and rock solid side folding stock allowing the M89 to be used in intense close quarters engagements and also fit into smaller gun bags/cases!

A high quality AUG Bullpup rifle delivering crisp shot after shot action. With a quick change spring gearbox and enough rails for all your accessories, you can go hit the field with reliability and consistency all day long.

If you're looking for a modernised full metal M4A1, the DA-A02-ETU ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts Delta Armory's best internals yet, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 16:1 steel gears and a high torque motor, backed up by the Delta Armory programmable MOSFET/ETU system. The Delta ETU offers the option for burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself.

On the outside Delta has added a gunfighter mod.3 style pistol grip, a slimline crane-style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a refresh without ruining its iconic outline and maintaining suitability for both casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02-ETU ALPHA™ M4A1 RAS AEG is ideal!

A Pump Action, Spring Powered Tri-Burst Airsoft Shotgun, which accepts an Airsoft Shotgun Shell inside the breech, and will fire three BBs which each Trigger pull. This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail, as well as a Shell Holder, Speedloader and Shotgun Shell.

Get into Airsoft skirmishing with a modern tactical variant of the world renowned and iconic AK47.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

The CM.028A comes with some tactical upgrades such as 20mm RIS/RAS railed handguard and threaded barrel to attach your favourite accessories.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box..

If you're after a sidearm with a stylish aesthetic, the VORSK Hi-Capa Vengeance Match Edtion is ideal. This full metal Hi-Capa 5.1 platform is available in four slick colour options, with metallic accents in either gold, red, purple or VORSK blue and is decked to the nines with enhanced ergonomic parts.

Styled to match real steel 2011 pistols designed for competitive shooting, the Vengeance boasts a ported slide, spiral fluted outer barrel, a light-enhancing front sight, extended controls and a flared magazine well for speedy reloads. If your sidearm tastes call for something with a more lively look, there aren't many more lively Hi-Capas than the Vengeance Match!

If you like a slick, licenced Hi-Capa platform, the EMG STACCATO series should be right up your street! This, the R618 STACCATO 2011 Hi-Capa XC is based on the real steel STACCATO 2011 XC, boasting full metal construction, a pre-installed compensator and official licencing from STACCATO Firearms via EMG and 6mm Pro Shop. This, of course, means full trademarks across the design and unrivalled authenticity; perfect for realism fans!

On the inside, the STACCATO XC is based around the Tokyo Marui Hi-Capa internal system, which should mean most aftermarket upgrades will be compatible, potentially with some fitting required. As it comes, the XC is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability, meaning it is a bit of a beast straight out of the box! If you're in search of a unique Hi-Capa with high-end styling and a respectable real steel pedigree, the EMG R618 STACCATO 2011 Hi-Capa XC belongs on your belt!

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

If you're into modern military firearms, you'll love the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG! Inspired by the real steel L403A1/KS-1 recently issued to the Royal Marines, the DA-C09-EGL is a slightly shorter variant closer in length to the KS-3, though at a glance, it makes the perfect stand-in for the L403A1. On the outside, the DA-C09-EGL is made primarily from high density polymer with an M-LOK handguard, 14mm CCW threaded barrel and 20mm Picatinny railed receiver, ready to be kitted out!

While the DA-C09-EGL is similarly equipped internally to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price.

Also inside the DA-C09-EGL is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you're into modern military firearms, you'll love the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG! Inspired by the real steel L403A1/KS-1 recently issued to the Royal Marines, the DA-C09-EGL is a slightly shorter variant closer in length to the KS-3, though at a glance, it makes the perfect stand-in for the L403A1. On the outside, the DA-C09-EGL is made primarily from high density polymer with an M-LOK handguard, 14mm CCW threaded barrel and 20mm Picatinny railed receiver, ready to be kitted out!

While the DA-C09-EGL is similarly equipped internally to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price.

Also inside the DA-C09-EGL is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09-EGL CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you're looking for an affordable long-range AR with a unique modern look, the DA-B12 BRAVO™ from Delta Armory is one to watch. This M4/AR-15 AEG is based on real steel LVOA-style AR-15s, boasting a 16.2-inch outer barrel and handguard along with an equally long 6.03mm tightbore inner barrel, ideal for outdoor skirmishing or a DMR build. 

Inside the DA-B12, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. 

The result is an AEG which shoots far better than one would expect for the price with full TM compatibility for the upgrade addicts. Whether you just wack a big scope on it and get to work or you build it out into a fully-fledged DMR, the DA-B12 makes a fantastic outdoors platform! 

This updated Airsoft Electric Pistol is roughly based on the comfortable EU Series, and offers a much better Rate of Fire and Performance than their standard equivalents. This version includes a MOSFET which 'amps' up the Performance with a faster Trigger Response, and the ability to dump an entire Magazine Fully Automatic in seconds.

This updated Airsoft Electric Pistol is roughly based on the comfortable EU Series, and offers a much better Rate of Fire and Performance than their standard equivalents. This version includes a MOSFET which 'amps' up the Performance with a faster Trigger Response, and the ability to dump an entire Magazine Fully Automatic in seconds.

Most commonly known as the Combat Master, this airsoft replica is an excellent replica of the sidearm of a man who takes the term operator to a whole new level! However somehow despite all odds against him he manages to survive every firefight and put a round through every man who ever got close. Nothing like a trusty tool!

This compact and awesome Gas Airsoft Shotgun is constructed almost entirely from Alloy, with the exception of a Polymer Pistol Grip and Stock. It takes standard Airsoft Shotgun Shells and is powered by an Internal Gas Tank just like the TM870 models. If you're looking for a highly realistic and grin-inducing Airsoft Shotgun experience, then this should be very high on your list.

If you're looking for a full metal AR platform for a mix of outdoors and CQB skirmishes, the Delta Armory DA-A14-ETU ALPHA™ 10" M-LOK M4/AR-15 AEG is a fantastic choice. Dressed to impress with a unique modernised receiver, M-LOK handguard and pre-installed angled foregrip, the DA-A14-ETU is as kitted out externally as it is internally!

Inside, the DA-A14-ETU boasts a pre-installed programmable ETU/MOSFET with burst mode and binary trigger firemode options, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. These parts join the standard Delta Armory pre-upgraded parts from SHS, resulting in an internal feature set to rival the best in its price range.

The most recent addition to the Delta Armory internal formula is the Berserker Flat HOP-up bucking, made by HOP-up masters, Psionics of Italy. While it may be a relatively short platform ideal for the fast-moving player, the Berserker bucking means the DA-A14-ETU can easily contend with the big boys at long range!

If you like the look of the iconic 1911, but you live in the current day and not the 1940s, the Army Armament R28 1911 MEU Pistol is for you! This is a modern take on the trusty historical sidearm; it features enhancements such as a 20mm Picatinny frame rail with a skeletonised hammer and trigger.

The standard R28 comes with a 12mm CCW female threaded barrel, whereas the tactical variant includes a pre-attached thread adapter that gives this pistol 14mm CCW male threading, making it ready for suppressors or tracer units. Perfect for a skirmisher who likes their pistol ready for the battlefield!

If you like the look of the iconic 1911, but you live in the current day and not the 1940s, the Army Armament R28 1911 MEU Pistol is for you! This is a modern take on the trusty historical sidearm; it features enhancements such as a 20mm Picatinny frame rail with a skeletonised hammer and trigger.

The standard R28 comes with a 12mm CCW female threaded barrel, whereas the tactical variant includes a pre-attached thread adapter that gives this pistol 14mm CCW male threading, making it ready for suppressors or tracer units. Perfect for a skirmisher who likes their pistol ready for the battlefield!

If you like the look of the iconic 1911, but you live in the current day and not the 1940s, the Army Armament R28 1911 MEU Pistol is for you! This is a modern take on the trusty historical sidearm; it features enhancements such as a 20mm Picatinny frame rail with a skeletonised hammer and trigger.

The standard R28 comes with a 12mm CCW female threaded barrel, whereas the tactical variant includes a pre-attached thread adapter that gives this pistol 14mm CCW male threading, making it ready for suppressors or tracer units. Perfect for a skirmisher who likes their pistol ready for the battlefield!

If you like the look of the iconic 1911, but you live in the current day and not the 1940s, the Army Armament R28 1911 MEU Pistol is for you! This is a modern take on the trusty historical sidearm; it features enhancements such as a 20mm Picatinny frame rail with a skeletonised hammer and trigger.

The standard R28 comes with a 12mm CCW female threaded barrel, whereas the tactical variant includes a pre-attached thread adapter that gives this pistol 14mm CCW male threading, making it ready for suppressors or tracer units. Perfect for a skirmisher who likes their pistol ready for the battlefield!

If you are in search of a full metal, licenced AEG replica of the latest HK416 variant to hit the market, this is the one! The Umarex H&K HK416 A5 AEG Rifle is built like a tank and looks absolutely incredible thanks to its high-quality finish and borderline insane attention to detail. Boasting officially licenced Heckler & Koch trademarks via Umarex along with precisely machined CNC aluminium parts and a steel outer barrel, it comes as no surprise that this HK416 is the best built on the market right now!

On the inside, the HK416 A5 features the VFC version 2.1 gearbox, meaning an ambidextrous fire selector lever and bolt catch are also present to give the realism fans what they deserve, together with full compatibility with version 2 gearbox internals. The HOP-up unit is a modern rotary design, keeping pace with rival platforms, and the internal MOSFET system keeps electrical efficiency at its peak and prevents the usual issues with electrical arcing occurring over time. If you are looking for an HK416 A5 AEG replica that is nearly impossible to tell apart from the real thing, this is what you need!

If you are in search of a full metal, licenced AEG replica of the latest HK416 variant to hit the market, this is the one! The Umarex H&K HK416 A5 AEG Rifle is built like a tank and looks absolutely incredible thanks to its high-quality finish and borderline insane attention to detail. Boasting officially licenced Heckler & Koch trademarks via Umarex along with precisely machined CNC aluminium parts and a steel outer barrel, it comes as no surprise that this HK416 is the best built on the market right now!

On the inside, the HK416 A5 features the VFC version 2.1 gearbox, meaning an ambidextrous fire selector lever and bolt catch are also present to give the realism fans what they deserve, together with full compatibility with version 2 gearbox internals. The HOP-up unit is a modern rotary design, keeping pace with rival platforms, and the internal MOSFET system keeps electrical efficiency at its peak and prevents the usual issues with electrical arcing occurring over time. If you are looking for an HK416 A5 AEG replica that is nearly impossible to tell apart from the real thing, this is what you need!