WADSN

If you need to see your way around a dark skirmish site or read a map during a night game without giving away your location, the Sidewinder Stalk Navigation light is the right tool for the job. This light provides soft light so you can navigate without lighting the whole site up and offers you the option of using red, blue, green or white light in 3 different intensity levels, as well as a flash mode for signalling.

Supplied with a mount for ARC rails, velcro and MOLLE, the WADSN Sidewinder can be mounted wherever you like and can be quickly removed and remounted should the need arise. If you are working on a helmet build and need some fancy bits to make it pop, the Sidewinder Stalk Helmet/MOLLE Navigation Light would be the perfect finishing touch!

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to Picatinny system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.25 inches and is attached to Picatinny system using the included screws and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. This mount is unique in that a scout flashlight can be mounted directly to the mount using screws thus saving you a bit of weight and space. Of course other devices can be mounted using the Picatinny rail.

The rail is a 20mm Picatinny type, measuring roughly 1.25 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you are in need of a compact tactical flashlight for a short-barreled rifle or SMG setup an M300 pattern light is one of the best options out there. This variant, the WADSN M300 Scout Tactical Flashlight w/Diffuser Cover uses an M300 light body coupled with a specialised head with a built-in diffuser cover which can be quickly flipped out of the way when not needed.

The diffuser is designed to spread the light throw out to more effectively distract and disorient enemy players when entering a room and flipping it aside will narrow the beam for long range engagements. Being based on an M300 scout light body means you can use alternative scout light mounts, tail caps and other scout light accessories to set it up to suit you perfectly.

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

If you have a nice helmet with an NVG mounting bracket we bet you are looking for ways to style it up and have it look a bit less "Airsoft". A great way to give your helmet a touch of realism is by adding a Rhino NVG arm, adding a military look to your lid and filling that empty mounting bracket on the front!

Never compromise on your ergonomics again! The WADSN Hot Button provides a pressure switch style remote control for your SF Scout style flashlight, in the form of a rock solid KeyMod and M-LOK compatible aluminium button. The button can be mounted directly to M-LOK or Keymod rails, preventing you from having the hassle of pressure switches that keep falling off, and allowing you to place the main control for your scout light wherever there is a room! This switch works similarly to the original scout light push button switch; providing constant on with a press, and momentary on with a light tap. 

If you have the strong desire to use a red dot and magnifier combination, but you also like to wear full face protection or a respirator, we have just what you need! The WADSN G43 Micro Magnifier Mount is compatible with the Ghost 3x Flip to Side Magnifier and replaces the standard flip to side mount with a raised mount designed to co-witness with EO style red dot sights with the PTS Unity Tactical FAST Riser, or T1/2 style red dot sights with the PTS Unity Tactical FAST Micro Mount. This mount can be raised and lowered to deploy, keeping the sides of your rifle slick and making it easier to manoeuvre with less chance of the magnifier snagging on gear, and making the setup more comfortable to sling. 

The WADSN DBAL Mini is a compact laser aiming module with two fully adjustable lasers combined into a single unit! The DBAL-Mini from WADSN provides both a red visible laser and an IR laser which is only visible under night vision, both of which are zeroed together with common tool-less adjustment dials. This DBAL-Mini is the much sought after aluminium version and boasts more realistic construction than its polymer counterparts. If you own night vision of any kind, this laser is a must!

If you're looking for a flashlight mount for your SMR-style handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is ideal. This mount is constructed from CNC aluminium with steel mounting hardware and designed to mount SF Scout (M300 and M600) flashlights to Geissele Super Modular Rail (SMR) style attachment slots.

The mount offers several mounting positions for your Scout Light, allowing for 3 different heights so you can get your accessories perfectly positioned. The mount also allows for mounting with a slight forward extension to defeat "suppressor shadow" or mounting at the rear to keep the light away from your muzzle, depending on how you install your Scout Light. This mount is only for standard SF M300 and M600 Scout Lights and won't fit the Scout Light Pro series due to its differing mount.

If you're in search of flashlight mounting solutions for the rare but super-slick SMR handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is what you need!

For a more robust and thick lighting solution, the K-2P is for those of you with more Russian inclined loadouts. Constructed from full alloy, the torch shines at a brilliant 800 lumens and is powered by 2 x CR123A batteries.

The torch is easily attached to your AK rail or 20mm Picatinny system and includes a remote pressure switch, which again can be easily attached to a rail right out of the box. Another inclusion is the offset mount, which allows you to forward mount your torch on the bottom rail to avoid casting a shadow if you are using a suppressor.

If you're rocking a Unity Fusion mount, the WADSN Offset Rail for Fusion Mounts should interest you! This CNC aluminium mount is compatible with Unity-style Fusion mounts and provides an offset 20mm Picatinny rail with 5 rail slots, ideal for flashlights and laser aiming modules. This rail mount is only compatible with Fusion style mounts and includes two steel bolts to mount it and the correct Allen key so you don't need to rummage in your toolbox!

If you want to add the elite look to your primary weapon but your local site bans lasers, the WADSN DBAL Mini style Tactical Flashlight was made with you in mind! This device is styled after the real steel DBAL Mini but instead of a laser, the device houses an ultra-bright tactical flashlight inside its front aperture.

The device offers several modes of operation, including low power mode for navigation and stroboscopic mode for distraction and disorientation, and mounts to your primary via a QD mount for 20mm Picatinny rails so you can easily switch between platforms without needing tools. The compact size of this unit makes it perfect for smaller SMGs and rifles, saving you rail space and offering similar functionality to a Scout tactical flashlight but with more modes to choose from and full compatibility with aftermarket 2.5mm pressure switches, dual pressure switches and hot buttons.

We get it, you want to light the enemy up with your PEQ box, but the switch is so far away...enter the Hot Button from WADSN. The button can be mounted directly to M-LOK or Keymod rails, saving messing around with velcroing standard pressure switches, and can place the main control for your PEQ box wherever there is a room!

If you are in the market for a compact and lightweight flashlight, then look no further! The M300B Scout Light; Single Switch Version is a superb choice for skirmishers who fear what hides in the dark, or more specifically, who may hide in the dark. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms without the need for rail adapters. Keep your operations illuminated with the WADSN M300B Scout Light; Single Switch Version!

For CQB, and for low light situations, there is no greater helping hand in the field than a tactical flashlight. The M340A Scout Light Pro from WADSN is the latest variant of their M3xx mini scout light series and comes complete with a low profile, angle adjustable mount for 20mm Picatinny rails, an angle adjustable M-LOK/KeyMod mount, and both the push button tail cap and the pressure switch tail cap. This light reportedly pumps out 540 lumens and literally turns night into day with its dazzling brightness!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you like flashlights and lasers but are short on rail space, the WADSN AXN Double Switch is here to save the day. This dual pressure switch allows you to operate your SF Scout style flashlight and a PEQ/DBAL style laser with a 3.5mm jack through a single switch mounted to either a 20mm Picatinny rail or M-LOK slots. 

Dual switches are a great way to reduce your workload in game and streamline your setup for a more modern and professional look. The AXN type switch has the advantage of being far smaller than its rivals, making it ideal for a setup with limited rail space. Being set at a comfortable angle also reduces fatigue when compared to flat switch designs. If you have a load of shiny things on your primary, the difference a dual switch makes when it comes to ease of use cannot be overstated!

If you like flashlights and lasers but are short on rail space, the WADSN AXN Double Switch is here to save the day. This dual pressure switch allows you to operate your SF Scout style flashlight and a PEQ/DBAL style laser with a 3.5mm jack through a single switch mounted to either a 20mm Picatinny rail or M-LOK slots. 

Dual switches are a great way to reduce your workload in game and streamline your setup for a more modern and professional look. The AXN type switch has the advantage of being far smaller than its rivals, making it ideal for a setup with limited rail space. Being set at a comfortable angle also reduces fatigue when compared to flat switch designs. If you have a load of shiny things on your primary, the difference a dual switch makes when it comes to ease of use cannot be overstated!

Suppose you own a WADSN M300 or an M600 Flashlight and want to keep it protected from any stray BBs during your skirmishes. The WADSN Diffuser for M300 & M600 Flashlights is the exact thing you need to prevent damage and keep your flashlights alive. This protective lens also diffuses the light meaning it produces less harsh shadows, this is ideal for not completely revealing your location when walking around the dark corridors in a CQB skirmish arena.

This diffuser also features a flip-up design, so you can remove the diffusing effect if you need the full effect of your torch to dazzle and surprise any opponents. To mount it on your M300 or M600 Flashlights, release the clasp mechanism, position the diffuser on your flashlight and then re-tight the clasp mechanism. The polymer construction ensures a secure attachment without the risk of causing aesthetic damage like scratches that alloy might cause to your WADSN flashlight.

If you are running a PEQ15 or DBAL laser unit you might have noticed a pressure switch is a prerequisite to actually making use of your cool laser! The WASDN Tactical Augmented Dual Function Tape Switch is designed to give you a rock solid, reliable and easy to use pressure switch that will make you wonder why you ever made do with the one that came in the box! This switch can be mounted to 20mm Picatinny rails with the pre-installed mount, or to M-LOK or KeyMod rails with the included mounting apparatus and the Picatinny mount removed.

If you find yourself using your torch a lot you need a remote pressure switch and if you have one why not think about upgrading to a deluxe switch with two enlarged buttons?

Attached via a clip to your 20mm RIS rail, the buttons are rubber housed within a reinforced polymer shell for extra protection and control. An advantage of two buttons is that you can operate torches and PEQs at the same time independently.

The specifications include a 2.5mm PEQ jack and an SF Scout jack.

If you like flashlights and lasers but are short on rail space, the WADSN AXN Double Switch is here to save the day. This dual pressure switch allows you to operate your SF Scout style flashlight and a PEQ/DBAL style laser with a Crane jack (for MAWL & OGL replicas) through a single switch mounted to either a 20mm Picatinny rail or M-LOK slots. 

Dual switches are a great way to reduce your workload in game and streamline your setup for a more modern and professional look. The AXN type switch has the advantage of being far smaller than its rivals, making it ideal for a setup with limited rail space. Being set at a comfortable angle also reduces fatigue when compared to flat switch designs. If you have a load of shiny things on your primary, the difference a dual switch makes when it comes to ease of use cannot be overstated!

If you like flashlights and lasers but are short on rail space, the WADSN AXN Double Switch is here to save the day. This dual pressure switch allows you to operate your SF Scout style flashlight and a PEQ/DBAL style laser with a Crane jack (for MAWL & OGL replicas) through a single switch mounted to either a 20mm Picatinny rail or M-LOK slots. 

Dual switches are a great way to reduce your workload in game and streamline your setup for a more modern and professional look. The AXN type switch has the advantage of being far smaller than its rivals, making it ideal for a setup with limited rail space. Being set at a comfortable angle also reduces fatigue when compared to flat switch designs. If you have a load of shiny things on your primary, the difference a dual switch makes when it comes to ease of use cannot be overstated!