Airsoft Boneyard

This replica has landed in our boneyard for unknown reasons - as far as things go, we cannot test for faults due to the  battery and battery charger being missing which replacements would have to be sourced if you're wanting this replica. Once again, we cannot guarantee functionality due to being unable to test the replica but doing a general inspection doesn't present us with anything obvious like a broken selector or trigger.

This replica has found its way into our boneyard due to the hop arm being broken - as far as we can tell, the guide that sits in the adjustment wheel has broken off which means the hop will always be set to fully off so a replacement part would be necessary to make the replica useable. Alongside this, the battery and battery charger are missing so we cannot test for further faults and cannot guarantee the replica will work out of the box. Ultimately you could use this replica for spare parts or as a prop/wall hanger if it's otherwise not functional.

This replica was returned to us with a cracked receiver. The crack is located towards the end of the receiver on the right side, and is significant enough to where the barrel assembly wobbles. We advise against using the replica as the damage is likely to worsen, and the rifle may break entirely. This thing would work better as a display piece or prop for the SVD fans out there...

This replica has found its way into our boneyard due to issues with the hop unit - opening the box, the hop unit is contained in a bag with some additional parts including a ball bearing, metal collar and a roll pin being secured with some masking tape to the box for safe keeping (these additional parts may or may not be associated with the hop unit so we recommend investigating this).

Due to this alongside missing the magazine, we're unable to test the replica for other faults so further investigation is required to find out all of the potential issues however quickly racking the slide presents us with a functional trigger alongside selector so ultimately this could be an easy re-assembly job.

This replica has found its way into our boneyard due to the magazine release being broken - it appears it may just be the spring that retains the release although other parts may be missing that holds it in place so further investigation is required to route out what replacement part is needed. Other than this though, firing through our chronograph gave us an average reading of 215 FPS on .2 BBs so ultimately this replica just needs its mag release fixing to bring it back to its former glory. Another thing to note is the magazine, battery and battery charger is missing so all of these would need a replacement sourced.

This replica has landed in our boneyard due to the wires leading to the battery connector being cut - this ultimately means that the replica isn't functional unless these are replaced with new ones - despite this issue, the replica seems to be in mint condition so this would be perfect as a wall hanger or a prop for cosplay. The battery and battery charger are also missing so this only pushes this replica to be used as a prop or wall hanger even more.

This replica has found its way into our boneyard due to apparently not working - on the contrary however, we found this replica to be working without issues where firing through our chronograph gave us an average of 214 FPS on .2 BBs and would happily fire on either fire mode. With this in mind, you'll have to source a battery alongside a battery charger for this replica due the original accessories not being present when we opened the box.

This replica has found its way into our boneyard for unknown reasons - as far as things go, the replica is fully functional regardless of what fire mode it's in and firing through our chronograph gave us an average reading of 226 FPS on .2 BBs so there's nothing wrong internally. All we can assume is this replica is an ex-display although there is a few scuff marks here and there so it's not exactly in mint condition but still looks presentable for a two-tone. The only thing that's missing is the battery and battery charger so these would have to be sourced if you're wanting to use this replica for skirmishing.

This shotgun's action is jammed up - when you are able to free this, regardless of what you do you cannot cock the spring to fire the replica. The feed ramp release linkage is also broken, so you cannot access the chamber of the replica in order to load a shell. Ultimately, this replica may be better suited as a wall hanger / display piece.

This Desert Eagle AEP was shipped to us without its battery and charger required to get it shooting. The gun is brand new and still in its original box alongside its magazine and cleaning rod - just needs a new battery and charger sourcing and you'll be good to go! Whilst it is brand new, we unfortunately cannot guarantee full and flawless functionality from the platform due to its untested nature. Remember, this is being sold as a Boneyard item after all...

This Desert Eagle AEP was shipped to us without its battery and charger required to get it shooting. The gun is brand new and still in its original box alongside its magazine and cleaning rod - just needs a new battery and charger sourcing and you'll be good to go! Whilst it is brand new, we unfortunately cannot guarantee full and flawless functionality from the platform due to its untested nature. Remember, this is being sold as a Boneyard item after all...

This Desert Eagle AEP was shipped to us without its battery and charger required to get it shooting. The gun is brand new and still in its original box alongside its magazine and cleaning rod - just needs a new battery and charger sourcing and you'll be good to go! Whilst it is brand new, we unfortunately cannot guarantee full and flawless functionality from the platform due to its untested nature. Remember, this is being sold as a Boneyard item after all...

This replica has found its way into our boneyard for unknown reasons - from what we can tell, there isn't any faults and the replica functions perfectly fine where firing through our chronograph gave us 221 FPS on .2 BBs and will happily fire in both semi and full auto. The replica does seem to be used with marks here and there but is otherwise in good condition. One thing to note is that the battery and battery charger is missing so replacements would have to be sourced in order to use this replica.

This replica has found its way into our boneyard due to the slide tabs being broken - this is what holds the slide to the frame when locked together but since they're broken, the slide isn't secure and will come off freely. Despite this, the replica is fully functional firing at 230 FPS on .2 BBs so if you can find a fix for the slide alongside a replacement battery and charger (since both are missing), this may be an ideal CQB platform. Otherwise this is also a valid option as a wall hanger or as a prop if you were to glue parts together.

This replica has found its way into our boneyard due to a few issues; first and foremost, the trigger seems to be broken as there's no spring tension - pulling the trigger all the way back whilst a battery is plugged in also provides nothing so whatever linkage/contacts are present is potentially also broken. The left side tab to keep the slide on the replica is broken as well though the right tab is still in one piece so you'll have to be careful when using this replica - keep in mind that you will need to source a battery and charger if you are wanting to use this replica since both are missing.

This replica has found its way into our boneyard due to the rear slide tabs breaking off completely - due to this fault, the slide freely comes off and isn't secure so you will have to replace the appropriate parts in order to bring this replica back to its former glory. Despite this, the replica is still fully functional when held together manually; firing at 235 FPS on .2 BBs. The charger and battery are also missing so these would have to be sourced in order to use this replica.

This replica has found its way into our boneyard due to an issue with the connector. As far as we can see, the positive connector has detached itself from the deans plug somehow and will need to be re-attached. Due to this issue, we're unable to test the replica for any further faults and we cannot guarantee that the replica is functional or not. Alongside the connector issue, the charger and battery are nowhere to be seen so these will need to be sourced.

This replica has found its way into our boneyard for unknown reasons; when investigating the replica, we found no obvious faults and was firing without issue - on our chronograph, we were seeing 235 FPS so as far as things go this is pretty much a fully functional platform that's just missing its battery and charger which a replacement would have to be sourced for both if you're wanting to use this long-term.

This replica has landed in our boneyard due to multiple issues that make it unusable - issues include the trigger being broken to where it's loose and doesn't cycle the replica, the wire loom has been cut for unknown reasons although we can only predict that it may have got trapped between the slide and the frame of the replica and excessive force was used to cut it and although this is a cosmetic issue: the external hammer is broken and doesn't retain itself so it'll just fall over when moved around. If you was to glue most of this stuff in place, it could work quite well as a prop or wall hanger as adding on to the issues, the battery and charger are missing.

This replica has found its way into our boneyard due to a cosmetic issue; as far as things go, the tab for the slide to sit on towards the rear of the replica has snapped off on the left slide. This again is purely a cosmetic thing and doesn't affect function. Regarding functionality, the replica fires completely fine on both semi and auto where we were seeing 235 FPS on .2 BBs so you could happily take this out of the box and skirmish it if you're able to find a replacement for the missing battery and charger.

This iconic replica has landed in our boneyard for a missing its safety lever on the left side of the platform. Other than this, it's fully functional and we were quite surprised as to how it performed, firing at an average of 290 FPS on .2 BB's using Abbey Predator Ultra Green Gas, which is extremely consistent for a Desert Eagle platform. If you're wanting yourself an extremely fun platform that is TM-based and extremely cheap, then this may be the one for you!

This replica has landed in our boneyard due to issues surrounding the slide getting jammed every other shot. We're unsure what's causing this however when this happens, it ejects a BB from the mag and causes a BB to get stuck under the slide so this is something that needs fixing otherwise more issues may arise.

Regardless of this issue, firing through our chronograph gave us a reading of 215 FPS on .2 BBs. The safety lever is also broken where only the right side is functional whereas the left side does nothing meaning it's no longer ambidextrous. We've also discovered that the charger is missing so a replacement is to be sourced in order to keep using this replica long-term.

This replica has found its way into our boneyard due to issues regarding the EBB not locking back on last round - we're not entirely sure what's causing this but despite this problem, the replica is functional and is shooting BBs. We were seeing an average of 210 FPS on .2 BBs. The safety lever is also broken and only the right side is functional with the left side doing nothing. The charger is also missing so a replacement would have to be sourced in order to continue using this replica.

This replica has found its way into our boneyard due to an issue with the EBB being faulty - as far as things go, the slide tends to jam up every other shot or so and there's no clear explanation to why other than potentially faulty electronics. Attempting to get some rounds through the chronograph, we saw an average of 210 FPS on .2 BBs. Adding on - the safety lever also appears to be broken with the right side being functional but the left side doing nothing. The charger is also missing so a replacement should be sourced.

This replica has found its way into our boneyard due to various issues - first of which is the EBB is non-functional and the replica won't cycle on trigger pull so you'll have to manually rack the slide each time you want to fire a BB. The safety is also broken and only the side side is functional. Firing through our chronograph, we were seeing 210 FPS - the replica also locked back successfully on last round so this feature is fully functional so all that needs doing is to get the EBB functional again and you'll have yourself an extremely unique and fun platform! Take note that the charger is missing so a replacement needs to be sourced.

This replica has found its way into our boneyard due to multiple issues - first of which is the hop adjustment has snapped and will need replacing if you're going to use the replica in a skirmish. Alongside this, the safety is broken in the sense that the left selector is detached from the right selector (the right side is the functional) so this will also have to be looked into if you're wanting ambidextrous controls.

Alongside this, the slide doesn't lock-back whatsoever through testing though despite these problems, we found the replica doing 220 FPS on .2 BBs. The charger is missing as well and will need a replacement - otherwise once the battery is dead, this replica is as good as a wall hanger or prop unless you can find the right charger.

This replica has landed in our boneyard due to missing some parts - we're not entirely sure what's missing however during testing, we found issues regarding the slide being locked back despite still having BBs in the magazine so there may be something missing to detect this properly. Otherwise this replica is fully functional where we were seeing 220 FPS on .2 BBs - the only thing to take notice of is that the charger for the magazine (since the battery is contained in the mag) is missing so a replacement would have to be sourced.

This item is being sold as a Boneyard as non-functional. The fuse has been tested and is working but the gun itself will not cycle. Cosmetically the gun is in pretty good condition and would make for a great project for someone in the know to work on or even a prop for a video/photo shoot!

This replica has appeared in our boneyard due to missing its barrel assembly; other than this, the selector is quite loose but functional and the magazine is missing so ultimately this could be used as a part donor for things like the trigger or BBU as both appear to be fully functional although further investigation would be necessary to see what's resulting in the loose selector lever.

This replica has found its way into our boneyard due to having a damaged nozzle - it appears that a small section at the top of the nozzle has snapped off; the nozzle itself also struggles to return back into its BBU suggesting that the spring may be damaged too or just lacks lubrication to smoothly return.

Apparently the magazine leaks as well so this would have to be investigated. Externally the replica is in good condition so ultimately you could have this as a wall hanger if you're into desert eagles.