Viewing 60 of 69.
59.00 kr.
  • Folding Foregrip
  • Side Screw Tightens
  • Tightly Locks into Place

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

49.00 kr.
  • High density polymer construction
  • Folding grip - Use as a vertical or horizontal grip
  • Mount to 20mm Picatinny rails 

If you are undecided when it comes to vertical grips and sometimes like the old-school ways, this Folding Vertical Grip from CYMA is ideal for you! Constructed from high density polymer with a steel folding mechanism, the Folding Vertical Grip can be mounted to any 20mm Picatinny rail via its spring-loaded QD mount. 

To mount the grip, simply push the textured end of the locking bar on the mount in and slide it onto the front of your rail. When you release the locking bar, the grip will stay right where it is. To fold and unfold, simply press the central screw-like button and position the grip in either the horizontal or vertical position. 

At the front of the grip, we are treated to a hand stop-like curved protrusion intended to prevent you from slipping off the grip and potentially shooting your hand; a useful feature if you mount this right at the front of a short-barreled platform. If you're looking for an affordable 20mm Picatinny grip solution with plenty of functionality, the CYMA Folding Vertical Grip is one to watch!

99.00 kr.
  • Ridged Surface
  • For M-LOK Rails
  • Screws/Nuts Inc.

A tough Polymer foregrip for M-LOK rail systems, is ridged to provide good grip, comes supplied with everything you need to attach it, and provides a more stable platform for manipulating your replica.

79.00 kr.
  • Textured Surface
  • KeyMod Rail Foregrip
  • Low Profile Compact Grip

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

79.00 kr.
  • Textured Surface
  • KeyMod Rail Foregrip
  • Low Profile Compact Grip

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

149.00 kr.
  • Heavy Duty
  • Excellent Grip
  • Very Thick Grip

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

129.00 kr.
  • SMG-5 Style grip
  • Compatible with M-LOK
  • Perfect for a PDW with M-LOK rails

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

129.00 kr.
  • SMG-5 Style grip
  • Compatible with M-LOK
  • Perfect for a PDW with M-LOK rails

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

39.00 kr.
  • High density polymer construction
  • KAC style grip - Great for US Army loadouts
  • Mounts to 20mm Picatinny rails

If you've only got pocket change but want a vertical grip, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is ideal. This ultra-affordable vertical foregrip is styled after the real steel KAC VFG, the iconic design used on US Army M4A1 rifles and G36K platforms used by German KSK. This VFG mounts to any 20mm Picatinny rail and is very easy to mount, requiring not a single tool! 

To mount the grip, unscrew the base, slide it onto your rail, align the hole in the side of the grip with a notch on your rail and tighten the base back down, securing the grip in place. If you're looking for a cost-effective ergonomic enhancement for your 20mm Picatinny rail-equipped platform, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is the one to go for!

159.00 kr.
  • FN Herstal trademark
  • Internal storage
  • Mounts to 20mm Picatinny rail

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

159.00 kr.
  • FN Herstal trademark
  • Internal storage
  • Mounts to 20mm Picatinny rail

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

179.00 kr.
  • Can Store Tools & Snacks
  • Perfect For Front Wired AEGs
  • Internal Battery Compartment

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

179.00 kr.
  • Can Store Tools & Snacks
  • Perfect For Front Wired AEGs
  • Internal Battery Compartment

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

79.00 kr.
Was 129.00 kr.
Save 50.00 kr.
  • Textured Grip
  • Extends Down
  • Folding Foregrip

A tactical folding Vertical Foregrip, designed for use with Airsoft AEG and GBB rifles, which allows the user to flip it down when required and fold back up when not in use to give it a lower profile.

79.00 kr.
  • High-density polymer construction
  • Stubby vertical foregrip
  • Compatible with 20mm Picatinny rails

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the FMA Compact Vertical Grip for 20mm Picatinny Rails is ideal. This vertical grip is stubby, perfect for those who like to use the "C-clamp" or thumb-over-bore grip. It has a grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

This grip mounts to 20mm Picatinny rails via its steel mounting apparatus. If you want more control over your primary when sweeping rapidly between targets, the FMA Compact Vertical Grip for 20mm Picatinny Rails will do the trick!

259.00 kr.
  • Aluminium construction
  • Zco Style Russian VFG
  • Mounts to 20mm Picatinny rails

If you want to add a grip to your railed AK platform but want to keep it Russian, this is the grip you need! The 5KU Aluminium Russian Compact Foregrip; 20mm Picatinny is constructed from aluminium with a ribbed external design to improve handling and add traction. Inside the grip, we are also treated to a storage compartment designed for CR123a batteries, though you can store other items inside (we use ours for sweets). 

This grip is based on the popular Zco-style vertical grip often seen on styled-up AK platforms with other Zco furniture. If you want to add modern attachments to your railed AK but want to keep it purely Russian, this grip belongs on your gat!

99.00 kr.
  • Quick Detach grip
  • Stubby - Good for modern shooting stances
  • Mounts to 20mm Picatinny rails

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

99.00 kr.
  • Quick Detach grip
  • Stubby - Good for modern shooting stances
  • Mounts to 20mm Picatinny rails

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

259.00 kr.
  • CNC Machined
  • Stubby Foregrip
  • 6061 Aluminium

This stubby Foregrip is constructed using CNC Machined 6061 Aluminium for a superior finish, and is designed to provide a stable aiming position whilst also remaining compact and reduce snagging on your own equipment. It has an integrated 20mm Rail attachment and will easily fit to RIS/RAS Rail Systems. There is also a secret storage compartment inside the grip, accessed by unscrewing the base. If you're looking for a Russian style Foregrip for your AK or even Western Rifles, the 5KU Aluminium Russian Grip will fit the bill nicely.

49.00 kr.
Was 69.00 kr.
Save 20.00 kr.
  • Rubberised
  • For 20mm Rails
  • Textured Surface

A rubberised vertical foregrip for Airsoft replicas with a 20mm rail, offering stability and a comfortable platform to brace your rifle.

159.00 kr.
  • Folding Foregrip
  • Compact Design
  • For 20mm RIS / RAS

A folding fore grip lovingly designed by NUPROL which fits onto 20mm RIS / RAS Rails to provide another manipulation point on a weapon which can be folded away when not in use.

89.00 kr.
  • High-density polymer construction
  • Front & rear crackle texture
  • Compatible with M-LOK slots

If you're ergonomic accessories for your M-LOK handguard, the Airsoft Artisan M-LOK Stubby Vertical Foregrip is both stylish and comfy! This vertical foregrip is the stubby variety, designed for use with the "C-Clamp" aka thumb-over-bore grip, functioning as both a hand stop and VFG all in one. 

The grip itself is made from high-density polymer and the M-LOK screw and nut from steel, giving you minuscule added weight with the assurance the grip will never come off in your hand. The front and rear include crackle textured panels for improved wet weather gripping qualities and the shape of the grip itself is surprisingly comfortable, bowing inwards in the centre and flaring out towards the tip, filling out the hand perfectly. 

A massive perk of this compact grip is it only requires a single M-LOK slot to mount, meaning if you're short of space on your M-LOK front end you can probably squeeze the Stubby Vertical Foregrip on along with your other doodads. If you want to sweep between targets faster and keep your primary under control as you do it, the Airsoft Artisan M-LOK Stubby Vertical Foregrip will be an asset to you!

89.00 kr.
  • High-density polymer construction
  • Front & rear crackle texture
  • Compatible with M-LOK slots

If you're ergonomic accessories for your M-LOK handguard, the Airsoft Artisan M-LOK Stubby Vertical Foregrip is both stylish and comfy! This vertical foregrip is the stubby variety, designed for use with the "C-Clamp" aka thumb-over-bore grip, functioning as both a hand stop and VFG all in one. 

The grip itself is made from high-density polymer and the M-LOK screw and nut from steel, giving you minuscule added weight with the assurance the grip will never come off in your hand. The front and rear include crackle textured panels for improved wet weather gripping qualities and the shape of the grip itself is surprisingly comfortable, bowing inwards in the centre and flaring out towards the tip, filling out the hand perfectly. 

A massive perk of this compact grip is it only requires a single M-LOK slot to mount, meaning if you're short of space on your M-LOK front end you can probably squeeze the Stubby Vertical Foregrip on along with your other doodads. If you want to sweep between targets faster and keep your primary under control as you do it, the Airsoft Artisan M-LOK Stubby Vertical Foregrip will be an asset to you!

219.00 kr.
  • High density polymer construction
  • 20mm Picatinny side rails included
  • Fits EU-series and AAP-01 GBB magazines

If you're fed up with missing out on kills while you're busy reloading, the Action Army Mag Carrier Foregrip for 20mm Picatinny Rail should be in your sights! Constructed from high-density polymer with steel screws and nuts, this device functions as a foregrip for 20mm Picatinny rails and also holds a single AAP-01 or EU-series GBB pistol mag; on board the pistol and ready to be slapped in double time!

When installed, your spare magazine is retained by a left/right swappable mag catch, meaning left or right-handed users can set Mag Carrier Foregrip up to suit them perfectly. The set also includes a pair of 20mm Picatinny side rails so you don't have to ditch your tactical flashlight or laser to use this nifty device. Please note, if you're planning to use this with a standard AAP-01 Assassin you'll need the AAP-01 Advanced Pistol Rail Set to mount it and it doesn't quite fit the AAP-01C due to alignment with its built-in rail.

If you're running a primary pistol which takes EU-series mags and is rocking a 20mm Picatinny frame rail, the Action Army Mag Carrier Foregrip for 20mm Picatinny Rail will have you back online after a reload in seconds!

119.00 kr.
  • Replacement original part
  • For Army Armament AUG AEG
  • If you have broken yours, you're in luck!

Maybe you have accidentally broken your AUG vertical grip, or you bought the railed version and you want to embrace tradition? Luck would have it Army Armament now offers their AUG folding vertical grip as a spare part! The grip is constructed from high-strength ABS polymer with an alloy core and includes its spring and mounting pin. This part is compatible with the Army Armament AUG but may also fit AEG AUGs from other manufacturers.

219.00 kr.
  • CNC Aluminium construction
  • Skeletonised angled foregrip
  • For KeyMod rail systems

If you're dressing up your KeyMod-equipped primary and need a foregrip, the K20 Aluminium Angled Grip for KeyMod from 5KU is ergonomic and aesthetically pleasing in equal measure! Made from CNC-machined aluminium and designed to be as lightweight and strong as possible, this angled foregrip suits any minimalist build style and keeps your wrist at a comfortable angle, reducing fatigue when shooting with modern techniques.


109.00 kr.
  • High density polymer with steel bolts
  • Stubby design - Ideal for thumb-over-bore
  • Mounts to KeyMod handguards

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

69.00 kr.
  • Angled grip
  • High-density polymer construction
  • Shorter than most - Perfect for short rail systems

The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.

29.00 kr.
  • High-density polymer construction
  • Battery compartment
  • Mounts to 20mm Picatinny rails

This foregrip has more to it than meets the eye, it features a secret battery compartment for storing an extra accessory battery, or two. It attaches to the common 20mm Picatinny rails, found on most rifles. To mount the grip, unscrew the bottom, slide it onto your rail, align the hole in the side of the grip with a notch on your rail and tighten the base back down, securing the grip in place.

The is an additional cap on the bottom turret that can be removed using a flat head screwdriver. Once this cap is removed it reveals a 10cm deep cavern that can house common batteries such as AAAs or CR123As. This is a unique feature for a foregrip and further maximises the foregrips use as both a comfortable grip and a small storage container.

49.00 kr.
  • Vertical Foregrip
  • Bottom Screw Tightens
  • Tightly Locks into Place

Add a foregrip your rifle for maximum control. The grip is secured tightly onto rails by first sliding it on then screwing the bottom until it is locked in place. The grip can be placed anywhere up and down a Quad Rail, and is designed to allow the user to chose where the additional control point on their weapon is placed. The further forward the grip is placed the slower the barrel will turn, and the further back the grip is placed the faster the barrel will turn. This is the perfect purchase for those Airsofters who want to add a bit of flair to their weapon, or want a grip on the front of their weapon.