All Airsoft Gas Blowback Internal Parts

If you want to take pure advantage of the inherent modularity of the VORSK VMP-2, these Complete Trigger Groups are the key! Available in semi-auto only for DMR builds or select fire (semi/full auto) for assault rifle setups, the VORSK Complete Trigger Group for VMP-2 Series is constructed from alloy with steel springs, pins and screws.

If you're rocking the VMP-2D or VMP-2MD, the select fire version will allow you to convert your DMR into an assault rifle, though you'll also need a low power nozzle to keep your build site legal. Installing the semi-auto only version in the VMP-2M will lock it to semi-auto, allowing you to pop a high power nozzle inside and run it as a compact DMR!

Each trigger group comes pre-built and equipped with ambidextrous fire controls, making it an almost literal "drop in" installation. No need to fiddle with small springs and awkward little screws installing these! Despite the super easy installation, any internal modification made will void the VMP-2's original 12-month warranty so we only recommend these for the pros!

If you want to upgrade your Umarex Glock and build a sleeper of a long ranged pistol setup, this is the HOP-up unit you need! The Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is compatible with the Umarex/VFC Glock 17 Gen.5, Glock 19 Gen.4, Glock 19X and Glock 45 GBB pistols and is constructed from alloy for improved strength. The unit is supplied with two HOP-up arms with one pre-installed, giving you a spare to keep handy or modify for some experimental HOP-up setups.

The tolerances of this unit are far more precise than the original, offering better air seal and gas efficiency, translating into better effect on target and better consistency. If you want to shock the enemy by landing a hit with your pistol at long range, the Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is the key!

If you're building out your Shadow 2 GBB and seeking more accuracy, the Maple Leaf Complete HOP-Up Chamber for KJW/ASG Shadow 2 GBB is an easy way to get there! This complete HOP-up chamber group is practically a drop-in fit and pre-built so you don't have to do any of the fiddly stuff!

The set includes a Maple Leaf 6.02mm Tightbore inner barrel made from stainless steel, the Maple Leaf HOP-up chamber and a Maple Leaf Autobot 60° HOP-up bucking paired with the much-lauded Maple Leaf I-Key. Compatibility-wise, the Complete HOP-Up Chamber should work flawlessly with both ASG and KJ Works CZ Shadow 2 GBB pistols. Installing this set should boost FPS and gas efficiency slightly thanks to tighter tolerances, improve accuracy potential and extend range, giving your sidearm-sized platform a primary-like punch!

If you've got leaky M4 ZET system mags, these could help fix them up! The CYMA CGS Enhanced M4 ZET System Gas Route Bucking 70 Degrees - Set includes 5 gas route buckings/seals for TM ZET system M4 GBBR magazines constructed from 70-degree hardness rubber for temperature resistance and improvements in strength.

Not only a handy spare to have on hand for anyone with TM ZET system M4 magazines, these gas route buckings can also help improve gas efficiency by reducing gas leakage between the magazine and nozzle, especially if you've installed a CGS nozzle or bolt carrier group into your TM. The CGS Enhanced M4 ZET System Gas Route Bucking is compatible with Tokyo Marui and CYMA CGS M4 magazines and should also fit the Double Eagle M4 ZET system magazines.

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your Tokyo Marui EU17 GBB pistol. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide.

If your Tokyo Marui ZET system M4/AR-15 needs some steel to keep it strong, the CYMA CGS Adjustable Trigger Box for TM ZET System M4/AR-15 GBBR belongs on your shopping list! This complete trigger box is ready to drop in and contains full steel trigger components which should last practically forever in normal use. The box is compatible with both CYMA's CGS M4/AR-15 GBBR series and Tokyo Marui ZET system M4/AR-15 GBBRs. 

Along with its steel construction, the extra perk of this box is its ability to adjust the hammer stroke strength, translating into adjustable FPS by varying the force with which the hammer strikes the valve knocker. As always, we recommend internal upgrades only for those who are confident in how to install them, but with this trigger box being pre-built, most of the hard work has been done for you!

The CYMA CGS Feed Lips & Gas Route Bucking Set for ZET System M4 GBBR provides 5 sets of feed lips and 5 gas route buckings for your magazines, allowing you to fix up old mags or keep spares handy just in case. This set is designed for TM ZET system M4 GBBR mags and should also fit clones of the TM design, including CYMA CGS M4 GBBR mags and Double Eagle M4 GBBR mags.

The included feed lips are an ideal spare part to have on hand; as any experienced GBBR user will know, dropping a hefty gas mag is likely to break the lips and render the magazine useless. The Gas Route Buckings are also very useful in the event your magazine develops a leak from the top, and can also help improve gas efficiency should you decide to upgrade your TM or Double Eagle M4 GBBR with a steel CGS bolt carrier group. If you're getting in deep with ZET system GBBRs, this set belongs in your toolbox!

Fix up your old mags with Army Armament Magazine Followers! This teeny, tiny part tends to take its fair share of wear and tear during long-term use and is a great replacement to have on hand if you have plenty of Army Armament Hi-capa mags at your disposal.

This is a replacement original part designed for Army Armament Hi-capa, JW3, JW4, R504/604 and R608 magazines to name but a few, but may also work with other brands' mags, though we can't confirm this. If you are having feeding issues, replacing the follower is far cheaper than getting a new mag!

If you are building out your dream Airsoft Hi-capa GBB pistol, the CowCow Stainless Steel hammer strut would be a great addition if you require an improved trigger feel and better mechanical engagement. This part is constructed from stainless steel with a titanium coating to prevent corrosion and warping. When installed into your TM based Hi-capa or 1911 GBB this part should help improve shot to shot consistency and provide longevity far beyond the original parts.

If you are building out your dream Airsoft Hi-capa GBB pistol, the CowCow Stainless Steel hammer strut would be a great addition if you require an improved trigger feel and better mechanical engagement. This part is constructed from stainless steel with a titanium coating to prevent corrosion and warping. When installed into your TM based Hi-capa or 1911 GBB this part should help improve shot to shot consistency and provide longevity far beyond the original parts.

If you want more recoil and higher muzzle energy from your Tokyo Marui M&P9 GBB, the CowCow 150% Hammer Spring for TM M&P9 Series is what you need. This replacement hammer spring is rated at 150% of the strength of the original spring, meaning your hammer will hit the knocker valve harder and release more gas, translating into harder felt recoil and higher FPS. Naturally, this will shorten the lifespan of your M&P so proceed with caution if this is your first time upgrading a GBB pistol.

If your grip safety is worn out, this replacement should cure that! The KJ Works Grip Safety for 1911 GBB Pistols is a replacement original part for the KJ Works 1911 GBB pistol series but should also fit most Tokyo Marui and TM clone 1911 GBB pistols. The grip safety is constructed from alloy and finished in black. Please note, this part may require modification to install and as such we recommend it only to experienced Airsofters with a decent amount of tech knowledge.

If you have stored your grenade for too long or in the wrong conditions, fear not! This kit includes exact replacement O-rings and washers for the APS Hell Fire grenade. It even comes with a tiny bottle of pure silicone lubricant, how thoughtful!

If you are planning a Hi-capa overhaul the Custom Hammer from Laylax Nine Ball is a great choice to not only improve the feel of your trigger but add some style points too. This hammer is a skeletonised design with weight-reducing ports machined into the hammer in a hexagonal shape, giving the hammer an ultra-modern look. The hammer is constructed from aluminium, keeping the weight low for maximum performance whilst boasting added strength when compared to most alloy hammers provided out of the box.

If your MK1 Pistol or Tactical Sniper has a leaky mag, this might solve it! The KJ Works Magazine Base Seal for MK1 NBB Pistol is a replacement original part for the ASG/KJW MK1, both the pistol and Tactical Sniper variants. This part replaces the magazine base seal and is the perfect part to have in the toolbox just in case!

If you've damaged your Maten MML's HOP-up, this part might be the fix you need! The PTS Syndicate HOP-up Adjust Ring Guide for MML Maten GBBR; Part [005] is a replacement original part for the PTS Mega Arms Maten MML GBBR, numbered 005.

While it has a strange name, this part of the HOP-up unit effectively functions as the "C-clip" you'll find in most AEG HOP-up units to hold the inner barrel in place and guide the HOP-up adjuster, so if yours is lost or damaged and needs replacement, add this to your shopping list ASAP!

If you're having issues with your STTI ST92F, this part may help! The ST92F Trigger to Barrel Connector from STTI is a replacement original part for the STTI ST92F. This part is made from alloy and numbered "Part 27" in the ST92F manual. It may fit other B9/92 style GBB pistols, but we cannot guarantee it!

Has your R29 magazine become damaged in some way, and a new base is exactly what you need? Well, lucky for you, this is exactly that! The Army Armament Replacement Baseplate for R29 GBB is a replacement part designed for R29 magazines but it should be compatible with other 1911 magazines that are Tokyo Marui clones. However, modification may be required and you should only undertake this modification if you are absolutely confident in your abilities.

It comes with the magazine base and gasket, it does not include a gas inlet valve. It is also recommended that you use silicone oil whilst installing to minimise the risk of damaging the seals.

The CowCow Trident Sear spring is designed to replace your original sear spring, and features revised contact surfaces which have been narrowed to prevent excessive friction with other parts. If you are building a high speed Hi-capa or 1911, this is perfect for the job!

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your KWA/KSC GBB pistol or SMG. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide or bolt.

As far as Hi-capa parts go, Airsoft Masterpiece are currently producing some of the best the Airsoft world has ever seen! The Steel Grip safety Type 2 replaces your original beavertail grip safety with a precisely machined steel part, guaranteed to perform when you need it!

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

If you're after more accuracy and range from your GBB pistol, VSR sniper rifle or GBBR, the 4UANTUM Friction Pro High-Performance VSR/GBB HOP-up Bucking is the key! This cutting-edge HOP-up upgrade set includes an HOP-up rubber/bucking with a uniquely shaped contact patch and an OMEGA-style flat nub, ready to be installed into any VSR sniper rifle, GBB pistol or VSR/GBB compatible GBBR HOP-up unit.

The Friction Pro bucking was developed over 2 years of rigorous testing and, since its launch, has taken the Airsoft world by storm. We've been extremely impressed by the performance of this bucking during testing, offering exceptional range and a remarkably tight grouping, a combination other buckings often compromise on.

Designed to perfectly centre your BB with each shot and lift up to 0.48g heavy-weight BBs, the Friction Pro provides positively epic long-range performance and is ideal for accuracy-focussed skirmishers who want impressive range without a wider grouping. Whether you're running low-capacity GBBR mags and need to make every shot count or you need your pistol to reach out and surprise the enemy team, the 4UANTUM Friction Pro High-Performance VSR/GBB HOP-up Bucking is what you need!

The Army Armament Green Gas Valve Kit for AA Hi-capa & 1911 GBB is what you need if your magazine leaks from the fill valve or knocker valve. The set includes replacements for both, complete with pre-installed rubber O-rings.

This set should be suitable for most Hi-capa and 1911 GBB pistol magazines but is specifically designed for Army Armament R26, R27, R28, R29, R31, R32, R45, R501, R601, R603 & R604 magazines. We recommend a valve key for easy installation. Breath new life into your pistol or save money fixing an old mag instead of replacing it!