All External Airsoft Parts & Attachments

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

Constructed from durable alloy and is foam filled to assist in suppressing muzzle sounds. 

This Airsoft suppressor is designed to be fit onto 14mm Counter Clockwise (CCW) threads, and is foam filled to reduce the audible output of the weapon. The suppressor is constructed from Alloy, and features a spring core and foam filling, and is finished with US Navy Seal Branding. 

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia. 

A transparent Polymer lens protector designed for EOTech Style Sights, protecting your Sight from BB's and other projectiles designed as a first defence, protecting your lens.

An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

A quick-detach sling loop point and sling loop for KeyMod rail systems, allowing you to attach a sling to any point on a KeyMod system.

A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a US Airforce Supplied Suppressor.

A steel-constructed sling plate designed to fit on Airsoft M4/15/16 AEG (Electric) Receiver.

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a Special Forces SOPMOD Supplied Suppressor. 

Whether you want to give your AEG a more elite look or you need space for a battery the Big Dragon AN/PEQ-15 Dummy Battery Box will do the trick! This dummy PEQ-15 unit is designed to look exactly like the real thing and has enough space inside to fit a battery measuring approximately 6.5x4.5cm. Included in the set is a set of realistic laser warning stickers for a more realistic look, with various colour schemes available so you can pick your favourite. This battery box mounts to 20mm Picatinny rails and is great for a front-wired AEG setup with limited space inside the handguard.

An Aluminium constructed outer barrel for M4/M15/M16 Airsoft Electric powered replicas which features a 14mm CCW thread and an extension piece to rapidly adapt between a CQB and Carbine length barrel.

A tactical folding Vertical Foregrip, designed for use with Airsoft AEG and GBB rifles, which allows the user to flip it down when required and fold back up when not in use to give it a lower profile.

An ventilated, alloy constructed replacement base plate for a standard M4 AEG motor base plates in pistol grips. 

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

A suppressor designed to fit onto Airsoft 6mm BB Gun in order to dampen the sound leaving the barrel.

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

A Quick Release Sling Loop for QD Sling Sockets, allowing you to install a Sling Loop that can be quickly released at the press of a button. This makes it ideal for handing your replica over for Chrono, or if you have multiple guns with QD sockets you can switch primaries in a hurry without taking your sling off!

If you need sling swivels, these might work! The Big Dragon Harris-style Sling/Bipod Lugs with Swivels include a pair of Harris-style sling/bipod lugs with self-tapping screw tips and a pair of sling swivels for Harris lugs. The included lugs are ideally used in real wood stocks and will require holes to be drilled for installation. Remember, measure twice and cut once!

The swivels themselves are compatible with pre-installed Harris lugs found on VSR-10, L96, M24 and M40 sniper rifles. If you have one of these rifles with harris lugs pre-installed, simply attach the swivels using the included pins and stash the included lugs away for a future project! Whether you want swivels for your existing lugs or you need harris-style lugs for your real wood-stocked Air Rifle or Airsoft gun, this set is ideal!