Airsoft Magazines

If you love your speedy SSR9 DSG but don't love reloading every couple of minutes, the Classic Army 1400rnd Drum Magazine for Novritsch SSR9 AEGs belongs on your gat! This electrically powered auto-winding drum mag holds a positively epic 1400 BBs and winds up via the button on the front, saving you time winding high-caps and meaning you'll almost definitely never need to reload unless you have a seriously heavy trigger finger!

The Drum Magazine is powered by a 9V battery (smoke alarm style) which is installed through the compartment on the front of the magazine. If you don't have a 9V handy and don't want to raid your smoke alarms, you can grab one here. BBs are loaded through the fill window on the rear of the magazine; simply open the port and pour your BBs in. With this done, press the button on the front of the mag dead centre for a few seconds and the mag will wind up, ready for you to let rip!

Compatibility-wise, this magazine works with the Novritsch SSR9, SSR9 DSG and Classic Army X9 AEG series, made by Classic Army and supplied by Novritsch. The mag is made predominantly from high density polymer to avoid compromising your in-game agility and making your SMG unwieldy. If you know how quickly an SSR9 DSG dumps a mid-cap and you CBA practicing your fast reloads and investing in heaps of standard mags, the Classic Army 1400rnd Drum Magazine for Novritsch SSR9 AEGs is what you need!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you want more BBs but don't want to weigh yourself down with an excessive amount of magazines, you need a high-cap magazine! The ARCTURUS Hi-Cap 350-BB magazine for M4/AR-15 AEG holds more than enough BBs for multiple firefights out on the skirmish field and is based on the iconic NATO STANAG 30rnd mag with its stamped steel shell.

Like most other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, open the window, then pour your BBs in. With this done, use the winding wheel on the baseplate to tension the mag, and you're all set. If you need more capacity but don't want to compromise agility with a rig full of magazines, the ARCTURUS Hi-Cap 350-BB magazine for M4/AR-15 AEG is what you need!

If you have ever spotted a vulnerable target, raised your Airsoft sniper rifle and gently squeezed the trigger and had nothing come out, you will understand the need for a way to monitor your ammo levels when sniping on the Airsoft field. Maple Leaf have the answer to our prayers, right here! The Transparent Magazine for the VSR-10 is constructed from a transparent polymer, allowing you to verify that your magazine is fully loaded before putting it into your mag pouch, and also allows you to quickly check how many BBs you have remaining through the clear witness window on the magazine's base. Never shoot blanks again with this mag!

A Spare BB Airsoft Magazine for ASG's Green Gas powered CZ P-09 Gas Blowback pistol.

Do you find yourself running out of ammo way too often? We have the solution! The Tokyo Marui 90rnd Saiga-12K Long Magazine is exactly what you need to keep on blasting for longer. This magazine has a polymer shell, alloy internals and a steel spring, which makes it very strong and reliable. This magazine is sure to survive whatever a skirmish may throw at you!

The magazine holds a whopping 90 BBs and features polymer feed lips. This is also where you load the magazine using a speedloader. The gas valve is found at the bottom of the magazine. To insert this magazine, use an AK-style "rock and lock" method. This means you have to insert the front section of your mag first, then "rock" your magazine back to lock it in place in your Saiga-12K.

The magazine can be removed from its polymer shell to view the internals and see the internal temperature sticker, this sticker shows what temperature the magazine is. To remove the polymer shell, press the button located at the rear of the magazine, then pull the shell from the internal magazine

If you need capacity for your S&T PPSh-41 AEG but don't like drum mags, get yourself a few of these! The S&T 540rnd High-cap Stick Magazine for PPSh-41 AEG is constructed from steel with polymer internals, holding 540 BBs loaded through the fill window on the top of the mag body.

This mag is only compatible with the S&T PPSh-41 and will not fit the Snow Wolf version.

Grab yourself some spare mags for the lesser seen but extra-cool SG55x series Airsoft AEG rifle so you can show the AR users what a weapon of class can do! Holding 200 rounds with wheel wound function and featuring integrated clamp lugs and semi-transparent design.

If you have an M4 with a rapid rate of fire, these magazines can easily keep up! The TPM-AR is one of the latest enhanced magazines from PTS Syndicate, a brand well known for its premium mags. The TPM-AR is compatible with practically any M4 AEG and is styled after the iconic design seen everywhere in Airsoft. This magazine is a spring-fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

A gas blowback Magazine for the WE Europe EU-Series Pistols EU19, and EU23.

A spare or replacement Gas Magazine for the Cyber Gun FN Five Seven (5-7), which holds a total of 17 rounds and is constructed to the exact same standard as the original magazine, using Alloy for the body and Polymer for the feed lips.

A gas blowback magazine designed for use with the WE Europe P08 Luger 6mm Airsoft BB gun. The magazine is constructed fully from Alloy and features a Polymer BB feed guide.

A CO2 powered 21rnd magazine for the KWC/Cyber Gun CO2 powered Desert Eagle.

If you need mags for your King Arms VSS Vintorez or AS VAL these are the ones! This great value box of 5 midcaps is built to match the real thing perfectly, including the reinforcement ribs on the sides and the unique shape of the 9X39mm real steel Vintorez/VAL magazine. The magazines can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. Being spring-loaded mid-caps, with these mags in your rig you don't need to worry about battle rattle!

These mags are designed for the King Arms VSS Vintorez/AS VAL AEG platform and will not work in the LCT or CYMA VSS/AS VAL AEGs.

If you have the desire to dump 350 rounds in one long burst from your GBB pistol but you don't want to go the HPA route this is your chance! The WE Europe 350rnd Green Gas Drum Magazine is designed for WE's GBB EU series which means it will also work in the Action Army AAP-01.

The magazine is constructed with a hefty alloy gas reservoir with a high density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you go pistols only and you need extra firepower to compete, this will suit you well!

If you need more firepower for your WE Galaxy EU series or optics-ready Armorer Works VX7/9, this will do the trick! The Armorer Works 350rnd Gas Drum Magazine for WE Galaxy EU Series boasts a whopping capacity of 350 BBs, loaded through the fill window on the left side of the mag body. Simply slide the door open and pour your BBs in, just like an AEG high-cap.

The winding wheel is on the front, easily accessed when wearing gloves and very fast to wind; a significant step up from comparable winding wheels and "flash mag" style setups which can be a hassle to use under pressure. Once your BBs are loaded, wind the wheel until the noise changes and you're ready to give 'em hell!

The fill valve is located on the baseplate, requiring the mag to be inverted to fill with gas. Boasting a gas reservoir just as massive as its BB capacity, this drum mag will handle rapid-fire far more effectively than standard or even extended mags, ideal for those who run their pistol as a primary. Compatibility-wise, this mag is only for the WE Galaxy EU series, WE EU-series MOS and Armorer Works VX7/9 optics-ready versions and won't work with standard EU series pistols.

With 350 BBs on tap with plenty of gas to get them on target, the Armorer Works 350rnd Gas Drum Magazine for WE Galaxy EU Series is the perfect addition for any pistol user that hates reloading and loves dumping rounds downrange!

If you're running an AEP and need more firepower, check this out! The CYMA 100rnd Auto Winding Drum Magazine for CM.030/122/123/127 AEP is electrically powered via an internal rechargeable battery, charging via the included USB Type-C cable. The charging port is on the front, as is the auto-winding button, allowing you to increase capacity without wearing your thumbs-down winding a wheel!

To fill the mag with BBs, simply open the fill window on the rear of the magazine body and pour your BBs in. Next, press the winding button until the noise changes to tension the magazine, ready for insertion. If your mag stops feeding but still has rounds left, hold the button to retention and then get back to shooting! 

Compatibility-wise, this magazine fits the CM.030, CM.122, CM.123, CM.127, ASG XP17 Challenger and CM.135S AEPs. If you're fed up with reloading with fiddly AEP mags, get this and you won't look back!

A CO2 magazine in that holds up to 25rnds at a time. CO2 powered the 12g bulb is stored in the bottom of the magazine with an easy to release base plate and easy access CO2 base plate. 

A multipack of magazine for the ASG Scorpion Evo. These new magazines from ASG allow you to insert your own decals to make your magazines look more realistic. 

If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!

Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.

If you're planning to run your Tokyo Marui Hi-Capa GBB on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; TM Hi-Capa GBB will improve your firepower considerably!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. Allowing standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your 'Capa!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you have a premium EU-style pistol such as the PTS Syndicate ZEV OZ9, you need this magazine! The PTS Syndicate SAM 25rnd GBB Magazine is as good as it gets when it comes to Airsoft pistol magazines. With a plethora of quality upgrades, this magazine is worth every penny.

It's compatible with most EU-style pistols, including Tokyo Marui and any clone of that model, making it very versatile if you enjoy that pistol style. The SAM magazine is designed for performance and durability, making it perfect for all skirmishers. Pick yours up today and dominate the battlefield!

This magazine gets its style from the real 32-round DD M4 magazines, offering an impressive 230 BB capacity and featuring a high-visibility yellow fill/feed port. This not only replicates the look of the real steel follower but also helps prevent backwards insertion under pressure.

Designed for high-speed builds, these mags are ideal for AEGs that demand reliable feeding at a rapid pace. Like all Airsoft mid-caps, they are loaded through the fill/feed port at the top using a standard Airsoft speedloader or loading tool. While optimised for the M4/AR-15 AEG platform, these mags are designed with broad compatibility in mind and should also work with most SCAR-L, 416, L85, and other AEGs that accept M4-style magazines.

Additional features include a textured surface on the sides, front, and rear for improved grip in wet or muddy conditions, and a loop on the baseplate for “mag-podding” or attaching a paracord pull. With official licensing, premium construction, generous mid-cap capacity, and a silent operation free of battle rattle, these mags are perfect for taking on high-cap users, while nearly doubling the capacity of your standard 130-round mid-cap!

Those lucky enough to be rocking a Tokyo Marui Next Generation Recoil System (NGRS) AEG can now lock and load with the best magazines in the Airsoft industry! The PTS EPM magazine has been around for some time now in one form or another and is now offered to NGRS users (M4, 416 and SCAR-L), granting superb built quality, unparalleled feed speed and reliability. The magazine is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great matt finish.

A spare magazine designed specifically for the Tokyo Marui 5.56 platform recoil series. 

An Airsoft Magazine designed for use with Tokyo Marui's SCAR-H Recoil Shock range, with a design based upon the 7.62mm STANAG Standardized Magazine used by NATO Forces. 

An Airsoft Magazine designed for use with Tokyo Marui's SCAR-H Recoil Shock range, with a design based upon the 7.62mm STANAG Standardized Magazine used by NATO Forces. 

These magazines are perfect for those who have the 3.8 Hi-Capa pistol, allowing you to have more shots available and allowing you to practice pistol loading drills.

Need some big mags for your big handgun? The Cybergun Desert Eagle green gas magazine should do the trick! This magazine is designed for the Cyber Gun Airsoft Desert Eagle L6 GBB and holds approximately 27 BBs which can be loaded using a speed loader through the feed lips at the top of the magazine. This magazine is a green gas magazine and can be filled through the fill valve on the magazine's baseplate, and can also take summer gas to keep the FPS down to reasonable levels on hot days. The magazine is constructed from alloy with polymer feed lips, with a steel feed spring and brass valves, and has realistic mock witness holes on each side, matching the cut-outs in the real Desert Eagle magazine used for gauging how many rounds are left.

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and holds an impressive 36 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!