Airsoft Magazines

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

A Low Capacity Magazine designed for M14 AEG, where the player wants a magazine with a more realistic capacity. The Magazine is constructed from Alloy, with Polymer internals. 

If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.

You shouldn't need to reload often when sniping, unless you are a bad shot! Regardless of this, it's always wise to have a spare mag on hand for extended skirmishes rather than panic under fire trying to load BBs as the enemies BBs shower down upon you! Introducing CYMA's spare magazine for the CM.702 M24 rifle. This magazine is constructed from polymer and holds 28 rounds. The magazine can be loaded either by hand or with a speed loader. 

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a mid cap variant, meaning that it holds a medium amount and is filled at the top using a speed loader. Unlike high-cap mags there is no 'battle rattle' so if you're a more sneaky type of player mid-cap mags are for you.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

If you're working on a modern tactical AK build, this is the ideal magazine to complete it! The CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG is constructed from brown tinted translucent polymer with a ribbed external design, showcasing mock cartridges inside for visual realism. 

Being an Airsoft mid-cap magazine, this mag holds 150 BBs loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. Thanks to its spring-loaded internals, this magazine won't rattle as you run, making it perfect for stealthy playstyles. Whether you're building a 5.56 style AK or you run a modernised AK bristling with modern accessories and upgrades, complete your build with the CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG!

A replacement magazine for the Scorpion Evo series that holds far more rounds than the standard mag is perfect for the operator who love to suppress the enemy or run lightweight with minimal magazines.

If you need more firepower for your tri-shot shotgun, this mag adapter is the key! The Golden Eagle M4/AR-15 AEG Magazine Adapter for M870 Shotguns allows your tri-shot M870 shotgun to be fed from common M4/AR-15 AEG magazines, offering a significant capacity boost so you can stay in the fight for longer!

Like shotgun drum magazines, the installation of this adapter requires the removal of the shell port door of your shotgun. This can be a permanent mod on some M870 shotguns, so please bear this in mind before purchasing. With this adapter on board, you can feed your shotty with M4 AEG high-cap mags or mid-cap mags in a range of styles, giving you insane firepower on the field without the bulk of a drum mag!

A medium capacity polymer magazine for AK series, both 47 and 74 for a range of manufacturer AK's including G&G, CYMA and more. All part of the  NUPROL Essential range of magazines.

If you have dreams of building an old school SMG-5 but you can't find the right mags, get them here while they last! The CYMA 120rnd Old School Straight Mid-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are mid-caps, meaning no battle rattle as you go room to room with your SMG-5 doing what it does best, and should be compatible with practically any SMG-5 AEG platform out there. The mags can be loaded through the fill/feed port at the top of the magazine body using a standard Airsoft speedloader or loading rod and hold 120BBs, a respectable capacity for such a compact magazine design. If you have your old school handguard and your Maglite ready, finish your build off with these old school straight mags!

If you're opposed to reloads and prefer shooting, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 from Army Armament belongs on your 'Capa. This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones.

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Hi-Capa Magazine for R501/R603/R604 should be a welcome addition to your kit list!

If you are a rootin' tootin' gun slinger who skirmishes with an HFC gas revolver a pocket full of these will cure what ails ya! These revolver shells hold one 6mm BB in each shell, and come packaged as a set of 6 so you can feel lucky all day. The BB is loaded into the front of each shell and is retained using an O-ring, preventing the BB from rolling out. The shells are constructed from alloy with a brass finish, with the "projectile" section of the cartridge being a slightly lighter shade for added realism. These shells are the perfect choice to fill your pouches if you run an HFC revolver in-game, but they would also be useful for photoshoots where realistic cartridges in the background will only enhance the scene!

If you want to take pure advantage of the AAP-01's insane rate of fire or you operate with the philosophy that reloads are for losers, the Action Army 350rnd Drum Magazine for AAP-01 GBB Pistols is perfect for you! This green gas drum magazine operates via a "flash mag" type system, meaning instead of winding an awkward wheel to keep the mag feeding you simply need to pull the steel drawcord on the base 4-5 times and you're ready to rock.

The Drum Magazine holds 350 BBs, more than 10 times the capacity of a standard AAP magazine and around 7 times the capacity of an extended AAP magazine; the perfect thing for AAP owners making full use of full auto and those who move so fast they ain't got time to reload!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

Finding your P90 is running out of ammo before you're done shooting? Maybe you think your P90 just isn't quite ugly enough? Just bought a P90, have no mags but a pile of old M4 highcaps? This magazine solution from CYMA will make you all happy. Huge Capacity to help you dominate the field, borrow your boring AR user mates magazines and hose the enemy down with a support weapon that fits in your pocket, the CYMA Mag adaptor Box mag is doing double duty!

If you want a full loadout of many, many magazines, but you don't want to be weighed down by pouches full of unnecessary steel, the NUPROL Essentials 140rnd Mid-cap for AK AEGs would be perfect for you. This magazine is styled after the original AK47 7.62x39mm steel magazine but is constructed from lightweight polymer so you can carry ten and still remain agile. 

The magazine holds 140 BBs and can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod/tool. This magazine is a 7.62 style mag, and is most appropriately used in 7.62mm AK replicas such as the original AK47, the AKM and the AIMS, but will fit and feed in most Airsoft AK AEG rifles (see Features for detailed compatibility). 

For those of you that prefer a more classic AK style, this magazine sports the old school Bakelite look for a more authentic loadout. The magazine holds 450 rounds and is a high-cap design in that it is wheel-wound at the bottom, meaning that you can get a tonne of shots in without having to swap mags.

The magazine also features a ridged texture on the front of the mag to allow for better grip when loading/reloading.

If you're running the OG assault rifle, the MP-44 from AGM or Cybergun, these magazines are what you need to keep the kills coming. The AGM 190rnd Mid-Cap Magazine for AGM MP-44 AEG is constructed with a steel shell and polymer internals and is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool.

Compatiblity-wise, this magazine works in the AGM and Cybergun MP-44 AEGs, and its impressive 190 BB capacity with no winding wheel or battle rattle to worry about makes this the best MP-44 AEG mag for skirmishing!

If you're running the epic Golden Eagle M1887 shell-ejecting lever action shotgun, you'll need some of these! The Golden Eagle Shotgun Shells for Golden Eagle/S&T M1887; Pack of 5 is designed for the Golden Eagle M1887 shotgun series but also works in the S&T M1887 series. These shells are supplied as a pack of 5, constructed from polymer with a metal rim coloured to match the brass base of most 12 gauge shotgun cartridges.

Like the original shells, these shells hold 1-3 BBs and can be loaded through the front of each shell, either with a speed loader or by hand.

Looking for a fast winding high-capacity AK magazine? The NUPROL 500rnd High-Cap Magazine is designed to work with AK47/74 AEG rifles but is a 7.62x39mm style magazine with a significant curve, making it ideal for AK47s and AKM rifles. The mag is a flash magazine high-cap and can be filled through the fill window at the top of the magazine body and is tensioned via the winding cord which is hidden beneath the hinged baseplate and can be accessed by pulling the baseplate down from the front.

This mag holds an impressive 500 BBs, meaning in most cases you will not need to reload in an entire battle round unless you are particularly heavy on the trigger! The magazine is constructed from stamped steel with the classic AK reinforcing ribs stamped into each side, making it great for old-school AK setups and OPFOR loadouts.

If you are rocking the EC-202, EC-203 or EC-204 you will need some mags to keep it doing what it does best. The East Crane 110rnd Mid-Cap Magazine for EC-202/203/204 AEG is constructed with a transparent polymer shell and a steel feed spring, showcasing detailed mock 7.62x51mm cartridges inside for that realistic look. This mag is compatible with the EC-202, EC-203 and EC-204 AEG series but will not fit other 417-style Airsoft guns. 

This is a mid-cap magazine, meaning it is loaded through the fill/feed port at the top of the mag using a speed loader or loading rod. Thanks to its spring-loaded design you will never experience the dreaded battle rattle while carrying this mag, making it great for milsim skirmishers and those who prioritise stealth!

A Mid-Cap Magazine for SR-25 / AR-10 Platform Rifles that accept a 7.62x51mm STANAG Magazine. It is a Spring Powered Magazine that is filled using a Speedloader, and will feed until empty without any rattle. With a Steel Outer Shell, this is a seriously strong and realistic Magazine, which is perfect for staying in the fight for longer without refilling. As an added bonus, it is compatible with CYMA, A&K as well as Tokyo Marui branded Rifles.

If you're looking for magazines for the fresh new sub gun on the block, the G&G MXC9? You have found them! The MXC9 medium capacity magazines are compatible with both the MXC9 and the G&G PCC.45 and are available in either 130-round or extended 170-round flavours.

These magazines are spring loaded medium capacity magazines and will require a speed loader or loading rod to fill, via the fill/feed port at the top of the magazine body. Both magazine styles are constructed from rigid high density polymer and include a clear polymer witness window on either side so you can keep track of your round count and never be caught off guard!

This 28rnd Green gas magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.