CYMA Airsoft

If you have an AK, but you ain't no Russian, this is the magazine you will probably want. The Modern Mid-cap Magazine from CYMA is compatible with most Airsoft AK47/74 series AEGs and is patterned after modern AK rifle magazines sold on the US civilian market. This magazine is straight in profile, making it realistic for AK rifles in 5.56mm and 5.45mm Russian, and its waffle style external ribs provide the modern look and superb gripping qualities, ensuring you have a firm grip on your magazine during a fast reload. The magazine is constructed from polymer with a steel feed spring, and can be loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod.

Looking to give your M24 platform Sniper rifle a bit more range? The CYMA Upgrade set for CM.702/M24 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

This set is compatible with most M24 sniper rifles based on the Classic Army design but is designed for the CM.702 series, and may need modification and tuning for other M24 platforms.

A Krinkov style Flash Hider/Amplifier for Airsoft Guns with 14mm CCW Threads. It is designed for an AK Platform Rifle, but will attach and fit to anything with a 14mm CCW Thread that you think looks good.

The Flash Hider doubles up as an Amplifier, making your Airsoft Gun sound louder when installed. It is also compatible with 24mm CW AKS-74U threads by removing the inner sleeve/adapter.

A full metal spring powered pump action Airsoft 6mm shotgun that is tri-barrelled and comes with a sawn-off style pistol grip as standard.

An electric powered tactical 9mm SMG platform which offers a 20mm railed handguard, 14mm CCW threaded outer barrel as well as a solid stock with loads of battery space.

The CYMA Front Sling Mount Pin for SMG-5 AEG is a replacement original part for the CM.041 SMG-5 AEG series and mounts to the front sight block to provide a sling loop on the left side. If your original sling loop is damaged or has gone missing, here is your replacement!

If you need a set of backup iron sights to finish off your build, CYMA has something that might interest you! The CYMA Polymer Flip-up Iron Sight Set for 20mm Picatinny rails offer tool-less adjustment, ambidextrous flip-up buttons and compatibility with 20mm Picatinny rails, meaning they fit on any Airsoft rifle with 20mm rails, which these days is most of them!

The sights offer two rear apertures to aim with, a smaller one for semi-automatic fire and long-range use and a wider one which is well suited to full auto fire and low light conditions. The sights can be deployed by pressing the textured section at the front of each sight from either side, after which they can be manually raised into position. Adjustments can be applied via the dial on the right side of the rear sight, which will move the aperture from side to side, and in the centre of the front sight post which will raise and lower it for elevation adjustments.

While few people actually use their BUIS in-game other than in emergencies, a set of backup iron sights are one of those small details which really help finish off a realistic build. Give your primary a professional look with the added confidence that you can still aim, even if left your red dot sight turned on since the last game!

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

If you have decided to get an AEP for those frosty days where GBBs simply won't work but you have a taste for the finer things in life the CYMA EMG CM.135S Salient Arms BLU AEP would suit you perfectly! This AEP is manufactured by CYMA and licenced by Salient Arms through EMG, and boasts full metal construction and a pre-installed MOSFET to give it an impressive trigger response and rate of fire.

While the slide doesn't cycle, this AEP is no slouch, being equipped with most of the ergonomic upgrades that make the Gas Blowback SAI BLU such a pleasure to shoot and a highly visible red light-enhancing front iron sight paired with an anti-glare rear sight for fast target acquisition. The BLU also has a 14mm CCW male threaded outer barrel protected with the classic Salient Arms style thread protector, meaning, unlike most AEPs, this one is ready for a tracer unit right away! If the plain jane looks of most AEPs have put you off, this stylish and cutting-edge design should seal the deal!

Whether you are upgrading your SMG-5 or repairing it, the CYMA CM.041G/CM.041H Complete Gearbox E-Edition High-Speed is a great excuse to do both at the same time! This gearbox is a Version 2, designed for CYMA CM.041 series SMG-5 AEGs but should fit most SMG-5 AEGs on the market (not SMG-5K) and also includes a high-speed motor of the long shaft variety.

As the heart of the CYMA E-Edition High-Speed Platinum AEG series, this gearbox is absolutely packed with upgraded parts. Highlights of the internals include the CYMA MOSFET/ETU system, steel high-speed 13:1 ratio gears, an aluminium silent piston head and cylinder head and a quick change spring system. Being a replacement original parts set, this gearbox is the exact setup found in the superb CM.041G and CM.041H AEGs, meaning if you have ever been envious of their performance you can now make your SMG-5 shoot just as nicely!

If you are a real Dragunov fan, nothing beats steel and real wood! The CYMA CM.057 is widely known to be the best replica of the iconic Dragunov SVD DMR rifle and this version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first issued. The CM.057 boasts full metal construction with a large proportion of steel in its build, giving it a reasonable and realistic weight without making this Dragonov a drag (hehe) to carry around all day!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD a great base platform for a DMR build. If you are after a long-range platform and want something with hints of modernity combined with the retro looks of real wood, the CM.057 should be at the top of your list!

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear.

Looking for a classic style AK but with some minor modern twists? This might just be what you've been after! Here we have another addition to the battle-proven and bomb-proof CM.045 series. It features stamped steel externals as well as an alloy HOP chamber, steel 7mm bushings, directional piston head and a spring guide w/ bearings.

If you have dinged up your integral suppressor for your CM.041SD, fear not! You can have your sneaky beaky SMG looking great once again with this replacement original part from CYMA.

If you are looking for a replacement piston for your Real Sword or CM.057 variant SVD, then CYMA has come to the rescue! The CYMA SVD/SVU Piston and Head Set includes the piston itself, a piston head and a piston head O-ring. The piston has a full 18-tooth rack of steel teeth, improving strength while keeping overall weight manageable, making it great for high-performance SVD builds.

The piston is constructed from durable polymer and the piston head from CNC anodised aluminium. The piston head features vents to improve tightness and has a rubber pad to help absorb the shock from impact when the platform is fired. The piston head also has a bearing within it to improve the spring action of your SVD replica.

The set is designed exclusively for the Real Sword or Cyma variants of the SVD and is NOT compatible with other brands' SVD platforms.

If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!

Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.

If you love your Russian platforms but are not stuck in the past, the CYMA CM.039C AK-47 Tactical AEG Rifle should definitely interest you. This beast is constructed using a lot of steel components to help provide an extremely realistic weight. It comes equipped with a foldable foregrip, so you can take down your opponents with precise handling whilst on the battlefield.

Inside, you'll find a 6.03mm tightbore inner barrel which provides some extra power and accuracy when sending BBs down range. The gearbox is a version 3 fitted with 18:1 steel gears running on 8mm ball bearing bushings, a tried and trusted formula guaranteeing consistency. If you're searching for an ultra-modern tactical AK replica to live out your tactical fantasies, the CYMA CM.039C AK-47 Tactical AEG Rifle is one to watch!

If you have HOP-up woes with your SMG-5 this could be what you need to fix it up! The CYMA HOP-Up Chamber with Rubber and Nub for SMG-5 AEG is a replacement original part for the CM.027 SMG-5 series but should also work in any TM based SMG-5 AEG (not NGRS variants). The set includes a complete HOP-up unit with the HOP-up arm and also includes a basic HOP-up rubber and nub, giving you everything you need to replace the entire unit in a single package.

This set is designed for the CM.027 which is a copy of the Tokyo Marui SMG-5 AEG and should also work with similar designs but is not compatible with the Classic Army SMG-5 or the later CYMA CM.041 series SMG-5 AEGs.

If you want sneaky styling for your CM.702 M24 or a tracer to light the enemy up, the CYMA Silencer Adapter for CM.702 M24 Sniper Rifle is what you need. This adapter replaces the front barrel cap, providing 14mm CCW male threads so you can mount the most common suppressors, tracer units and other muzzle devices on the Airsoft market. 

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 100 rounds so you can stay in the fight longer with your AEG.

The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves. Loaded at the top of the mag using a speed loader, the magazine is that of a mid-cap mag, which means no battle rattle when sneaking around.

Please note that these mags are specifically for CYMA Airsoft AEGs.

An Alloy constructed Muzzle Brake for AK model replicas, which comes supplied with an adaptor to install it on any 14mm CCW thread.

This metal AK47 body by CYMA is constructed from Aluminium and zinc alloy and is finished in a period accurate gun metal grey. This is the perfect solution for a CM.028 or CM.522 owner who wants to give their AK a metallic feel and increased realism!

If you want to hot swap upper receivers like a real operator, now you can if you have a CYMA CM.097 AEG! The CM.097 Upper receiver is a replacement original part, and could be of use to someone wanting to freshen up an old AEG, or could be used to build a specialised replacement upper receiver so you can change your CM.097 length and battlefield role quickly and easily. The upper receiver comes with a pre-installed dust cover, charging handle, mock forward assist and mock bolt carrier, so no need to source these trim parts separately! This upper is a modern design with the squared off geometry and advanced look, making it a sure choice for a 21st century high speed M4/AR15 build.

If you like an AK but want something a bit more handy for CQB, the CM.045A AKS-74U is what you need! This subcompact AK variant is constructed almost entirely from steel, with a stamped steel receiver and top cover to give an authentic feel in the hands, along with real wood handguards to complete the AK look. 

While the build quality of the CM.045A is second to none in its pricerange, the internals are also worth shouting about! Featuring steel gears running on 7mm ball bearing bushings, a ball bearing equipped spring guide, a high torque motor and a silent piston and cylinder head set you have very little else to do to get the most out of this "Krinkov" AKS-74U.  If you want a realistic AK that shoots as good as it looks, you have found it!

If you like ultra-modern AKs and are into the hyper-aggressive Zco look, you'll love the CYMA CM.113A AK-74 Zco Custom AEG; Kestrel Basic ETU! This beast boasts full metal construction with a hefty steel receiver along with flawlessly machined external enhancements inspired by real steel Zco parts. With a distinctively menacing modern aura, the CM.113A is perfect for any contemporary AK-themed loadout!

Inside, you'll find CYMA's high-speed E-Edition internals, including 13:1 high speed CNC steel gears running on 8mm ball bearing bushings, a polymer piston with a full steel tooth rack, a CNC aluminium piston head and cylinder head, a high speed Neodymium magnet motor, low-resistance wiring and a 6.03mm tightbore inner barrel. Also inside is the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. AKs with programmable triggers are a bit of a rarity; it's great to see CYMA keeping the AK platform competitive with modern ARs!

Equipped with the best internal parts CYMA Platinum has to offer and dressed to impress with the latest Russian gucci goodness on the outside, the CM.113A AK-74 Zco Custom AEG is a fantastic platform for anyone who loves a cutting-edge modern AK!

If you are gearing up to spruce up your old AK AEG this might be handy! The Front Handguard Cap with Sling Point from CYMA is an original replacement part for the CM.04x series AKM/AK74 AEG. The part is constructed from alloy and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the CM.04x series but should also work with VFC and LCT AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full size AK handguards only.

If you are running an AEP and you want a polymer retention holster here is your opportunity! The CYMA Polymer Retention Holster is designed to fit the CM.126, CM.126S and CM.132S AEPs. This holster holds your pistol in place via a polymer tab which indexes with the trigger guard, keeping it nice and secure as you run and ready for a fast draw when you press the button on the outside.

The holster itself is supplied mounted to a polymer "paddle" mount which will fit any belt of up to 2" in width and mounts via a rotary interface, meaning it should be compatible with rotary interfaces on MOLLE holster mounts, shoulder harnesses and belt mounts of different styles and draw heights. The rotary interface allows you to set your preferred draw angle using the included Allen key by loosening the bolt in the rear of the mount, repositioning it and tightening the bolts back down, giving you many more options than a standard fabric universal holster. Finally, AEP users are no longer held back by a lack of modern holster options!

If you need mags for your CYMA or Bolster Tuned CM.058 Bizon SMG, here you go! The CYMA 170rnd Mid-Cap Magazine for CM.058 Bizon AEGs is a spring-loaded mid-cap magazine with a capacity of 170 BBs, loaded through the fill/feed port using a speed loader or loading tool.

The magazine exterior matches the real thing perfectly, made from strong high density polymer, complete with "9x18" calibre markings on the side. This magazine is designed specifically for the CYMA CM.058 but will also work flawlessly with the Bolster Tuned CM.058.