CYMA Airsoft

A 20rnd spare or replacement Magazine for the CYMA branded CM.706 Airsoft Sniper Rifle. If you want to spend more time set up in your nest and less time walking back to the safe zone for a reload, then you need to stock up on Magazines to prevent you having to give away a good position. Constructed from a mix of Alloy and Polymer, these Magazines can be filled by hand or using a Speedloader, and are a great way to stay in the fight for longer. The design of the Magazine allows them to 'spring' out of the Mag Well when released, making them much easier to remove.

If your CYMA CM.098 or CM.057 needs a revamp, the CYMA Stainless Steel Cylinder for CM.057 SVD & CM.098 SR-25 AEGs should be of use. This stainless steel cylinder is ribbed to promote heat dissipation and polished on the inside for minimal friction. 

This cylinder is a standard bore unported cylinder and is compatible with version 2 long gearboxes found in CA/A&K SR-25 AEGs and CYMA CM.098 SR-25 AEGs and also fits the Real Sword spec SVD gearbox used in the CYMA CM.057 SVD/SVU series and the Real Sword SVD Dragunov. 

If you want glowing BBs without making your primary any longer or fitting some bulky, slightly ugly, tracer unit, the CYMA Tracer HOP-Up Chamber for AK AEGs is a great choice! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub.

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself.

While it is designed for use with the CM series of AKs, this unit should work with most AKs on the market, however, potential modifications will be required to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your classic Russian primary with the CYMA Tracer HOP-Up Chamber for AK AEGs!

If you have plans to style up your AK for 21st century combat the CYMA Aluminium M-LOK Handguard adds M-LOK accessory slots so you can mount the latest and greatest mission essentials and benefit from reduced weight! The set includes an upper handguard with "Grater" style vents and a lower handguard with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions.

Both the upper and lower handguard are constructed from aluminium using CNC machining and are finished with matt black anodising for a smooth and flawless finish. Compatibility-wise, this handguard should fit practically an AK47/74 platform AEG or GBB rifle but will not fit AKS-74U rifles due to their shorter length handguards. Give your AK the PMC or civilian tactical look!

This Airsoft electric replica of the world renowned Dragunov SVD, has a tough, full metal construction, and is true to life in that it is is semi-automatic only with a low cap mag, included in the box.

Now you can really feel like an old-school Russian sniper, with this variant sporting a tactical black look.

If you're looking for a replica, that is no frills, sturdy construction and easy to use, this Dragunov lets you pick off targets at range; Great for beginners and seasoned players alike wanting to get into skirmishing with a Russian loadout. 

If you have damaged your suppressor mount on your CM.041 SD AEG you may think you are out of luck, but thanks to CYMA expanding its line of replacement parts you can now swap the mounting apparatus out for a fresh new mount, and have your integrally suppressed SMG rocking its suppressor again!

This polymer P90 magazine is compatible with any TM-based P90 AEG, including brands like CYMA and Novritsch. It has a translucent brown design with mock bullets visible through it, giving your SMG an extra sense of realism as you charge through the Airsoft site.

The sturdy steel feed spring makes this a mighty fine magazine that will last you a long time. This magazine can hold approximately 70 BBs, not a large amount for full auto spraying and praying, but more than enough for a game of CQB, so long as you aren't too trigger happy...

If you need a new cylinder head to fix up your Dragunov, check this out! The CYMA Aluminium Cylinder Head for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and is fitted with two O-rings to seal any gaps between it and the cylinder for perfect efficiency and minimal air loss.

The cylinder head also has a sound dampening pad installed on the rear face which reduces gearbox noise and protects the piston head from the force of repeated impacts. A replacement original part for the CYMA CM.057 SVD/SVU series, this cylinder head is also compatible with the old Real Sword Dragunov SVD!

One of the few problems with old-school cool like the SMG5K series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

If your CM.097 lower receiver is damaged maybe it is time to replace it with a fresh one! The CYMA Alloy Lower Receiver for CM.097 M4/AR-15 AEG is a replacement original part for the CYMA CM.097 AEG series and is constructed from alloy. The body pins are constructed from steel for maximum strength, and the fire selector markings are finished in a modern style, with coloured bullet pictograms to indicate each mode of fire.

The set includes all body pins, the fire selector, the bolt catch and the magazine release, meaning no fiddling around trying to swap the trim parts from your old receiver, just drop your gearbox straight in!

If you're committed to the AK platform but need something which can go toe-to-toe with modern AR-15s, the CYMA CM.113 AKM Zco Custom AEG; Kestrel Basic ETU is exactly that! Boasting the solid alloy and steel build CYMA AKs are known for and bristling with ultra-modern Zco-style parts, this beast is also fully upgraded on the inside, equipped with CYMA's high-speed E-Edition internals making it ready for 11.1V LiPo batteries with a rate of fire that is hard to beat!

Inside, you'll find 13:1 high speed CNC steel gears running on 8mm ball bearing bushings, a polymer piston with a full steel tooth rack, a CNC aluminium piston head and cylinder head, a high speed Neodymium magnet motor, low-resistance wiring and a 6.03mm tightbore inner barrel. Also inside is the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. AKs with programmable triggers are a bit of a rarity; it's great to see CYMA keeping the AK platform competitive with modern ARs!

Whether you're working on a modern Russian Armed Forces loadout, a PMC kit or simply love the unashamedly aggressive styling of Zco external parts, the CYMA CM.113 AKM Zco Custom AEG; Kestrel Basic ETU will put a big smile on your face!

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 300 BBs so you don't have to carry as many to stay in the fight for longer. The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves.

It is loaded at the top of the mag using the fill window and being a high cap design means that you will need to rotate the wheel to load BBs onto the spring. Make sure it is completely empty after use to avoid wear and tear on the internal mechanisms of the magazine.

Please note that these mags are specifically for CYMA Airsoft AEGs.

An Airsoft Electric Pistol which features a MOSFET for a rapid rate of fire and consistent performance.

If you are searching for the best CQB platform out there, the CYMA Platinum SLR Airsoft Works AKS-74U AEG; Tracer HOP-up is definitely worth considering. Absolutely brimming with upgraded parts including an EShooter Kestrel Basic ETU/MOSFET, 13:1 CNC steel gears, CNC aluminium piston and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, this lil AK shoots like a laser and its built-in tracer HOP-up gives it an instinct aiming and psychological warfare advantage when exchanging fire at kissing distance.

The new addition to this latest SLR AKS-74U variant is the Kestrel Basic ETU/MOSFET system from EShooter, replacing the original CYMA Zeus MOSFET and offering more advanced features than ever before. These include 3-round burst and binary trigger programmable fire control options, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. 

Externally, the SLR AKS-74U definitely meets the high standards CYMA AKs are known for, with full metal construction including a steel receiver and top cover, CNC aluminium "Solo Krink" handguard, AK Billet stock and Synergy Mini-Comp with full licencing from SLR Rifleworks. The modern furniture enhances handling considerably and also allows modern accessories to be easily mounted, from suppressors to red dot sights, vertical grips and tactical flashlights.

Whether CQB is your poison or you have an aggressive playstyle and like to get right in the enemies' face, the CYMA Platinum SLR AKS-74U will be an asset to your arsenal. Built like a tank with almost as much firepower, don't let its size fool you, this compact AK comes with full-size performance!

If you have misplaced your SMG-5's rear body/stock pin you are in luck! This CYMA original replacement part is designed for CYMA SMG-5 AEGs but may also fit others. This pin is the rear body pin which holds the stock to the receiver and is constructed from alloy.

A replacement original selector switch set for the CM.041 SMG-5 Series of AEGs. If your selector switch is a bit worn, no need to put up with it! Replace your old selectors with some fresh ones and have your SMG-5 looking great again!

If you like to chop and change your setup regularly, the CYMA QD 20mm Picatinny Rail Adapter for M-LOK should be of use! This 20mm Picatinny rail adapter for M-LOK slots deviates from the norm in its QD mounting mechanism, allowing you to quickly mount, remove or reposition the rail without any tools. If you're fed up with fiddling with M-LOK nuts, this rail helps you avoid that!

The rail measures approximately 80mm in overall length and offers 7 slots to mount your 20mm Picatinny accessories. Whether you appreciate the time-saving nature of QD accessories or you like to alter your primary setup regularly to try out new configurations, the CYMA QD 20mm Picatinny Rail Adapter for M-LOK will change your game!

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

A tough Polymer constructed magazine for a range of CYMA/WELL series Spring Sniper Rifles (check compatibility), which offers a whopping 100rnds to lay down on the enemy from afar. 

Customise your MLOCK handguard with this easy to attach Harris lug for use with bipods and slings. Constructed from aluminium, the attachment is sturdy and well-weighted.

If you're into the "Honey Badger" look, the CYMA Platinum CM.097D M4/AR-15 SD AEG; Kestrel Basic ETU will definitely please you! Boasting full metal construction and an integral suppressor surrounded by a CNC aluminium M-LOK handguard, the CM.097D is rocking all the superb pre-upgraded components CYMA's Platinum series is known for with a more compact form and stealthy styling, ideal for CQB or fast moving, clandestine skirmishers!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

With top tier pre-upgraded internals and solid externals with a cutting edge aesthetic, the CM.097D is a beast in all aspects and its compact size lends itself well to fast moving, aggressive playstyles and close quarters environments. If you need a modern, full metal AR which will never need upgrading, the CYMA Platinum CM.097D M4/AR-15 SD AEG; Kestrel Basic ETU is the one to go for!

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you have a thing for modernised AKs, you'll love this! The CYMA Platinum SLR Airsoft Works AK-105 AEG is absolutely packed with pre-upgraded parts and is officially licenced by SLR Rifleworks with detailed replicas of SLR parts across the design. This modernised AK-105 is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery. This means you can light the enemy up with tracer BBs without adding any extra length or weight to your gun, adding in a rare innovation usually only found on the aftermarket and requiring a certain amount of expertise to wire in. Inside the V3 gearbox, it gets even better!

With pre-installed 13:1 high speed CNC steel gears, a CNC aluminium piston head and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, there is practically nothing left to upgrade on this beast! Also inside this, the latest version of the SLR AK-105 we are treated to the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Make no mistake, this beast is even more kitted out than the previous version!

If you held off on the original SLR AK-105 from CYMA, the EShooter Kestrel Basic ETU version will make you glad you waited! Retaining all the best bits of the original but with advanced functionality added, the CYMA Platinum SLR Airsoft Works AK-105 AEG; Kestrel Basic ETU is a real killer on the field!

A replacement Alloy butt plate for CYMA branded AK series replicas.

For the AK guys who want to join the rest of us in the 21st century, CYMA has come through! The Modular KeyMod Railed Handguard is constructed from aluminium and includes a smattering of KeyMod 20mm Picatinny rail sections pre-installed, which can be moved around and placed wherever you like. This handguard is particularly interesting as it can be set up in several different configurations, either with or without the included handguard extension section and with the choice of leaving the upper handguard sections on or removing them to lower the weight. 

An Airsoft Electric Pistol which is based on the Hi-Capa platform and offers a MOSFET for a terrifying rate of fire, making it the perfect dependable backup.

If you're looking for the ideal GBBR to base your custom build on, you just found it! The CYMA CGS 10.5" M4A1 CQB GBBR is based on the original M4A1 in CQBR configuration, with the classic ribbed handguards, L.E stock and A2 pistol grip. This means either you can run it plane Jane in the classic configuration or build your own custom GBBR without wasting high-end parts.

Not that this platform lacks high-end parts! Inside you will find the same majority steel internal parts and 6.04mm tightbore inner barrel as its Noveske and Daniel Defense cousins. The most important aspect of this GBBR is its internal system which is based on the Tokyo Marui ZET system and enhanced by CYMA's GBBR wing, known as CGS. If you like thunderous recoil, a full metal build and externals just waiting for your own custom touch, the CGS 10.5" M4A1 CQB GBBR is the one to go for!

If you are building a version 3 AR36 gearbox or you have an old AR36 AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AR36 AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AR36 doing its dirty work once again!

If you like to keep spares around just in case or you've had a selector plate failure in your Thompson or Pulse Rifle AEG, this is what you need! The CYMA Selector Plate for CM.033/051 Thompson AEG is an replacement original part from the CYMA CM.033/051 Thompson AEG series, constructed from polymer. Compatibility-wise, this should fit all Tokyo Marui spec Thompson and M41A Aliens Pulse Rifle AEGs, including those made by CYMA, Snow Wolf and Tokyo Marui.

If you're the techy type looking to get your hands on affordable spares, the CYMA Tappet Plate for V3 Gearbox belongs in your bits box! This original replacement part is constructed from high-density polymer, designed for V3 gearbox-equipped AEG replicas such as the SMG-5K, AUG, AK and AR36. Whether you've got a platform to repair or you want to be ready in case anything fails, the CYMA Tappet Plate for V3 Gearbox is a handy part to have around!