CYMA Airsoft

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

If you're looking for an affordable way to spice up your build, the CYMA High Torque Neodymium Magnet Motor; Long Shaft is a great shout. This motor is the standard motor provided in CYMA's top-of-the-line Platinum E-Edition AEGs, a high torque motor powered by Neodymium magnets. Being a high-torque motor, this motor is ideal for DMR builds requiring stronger springs and CQB builds seeking improved trigger response but is easily fast enough to give most AEGs a significant ROF boost!

This version is the Long Shaft model, designed for M4/AR-15, P90, SMG-5 (not the -K model) and G3 AEGs and includes a pre-installed D-type pinion gear constructed from steel. The pinon spring is also included and the motor is pre-wired for spade connectors, meaning there is no need to break out the soldering iron to install it. If you're looking for a snappier trigger, building a DMR or seeking an increase in rate of fire, the CYMA High Torque Neodymium Magnet Motor; Long Shaft is a great affordable option!

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

An Airsoft Electric Pistol which has an upgraded Gearbox with a pre-installed MOSFET, meaning you get a high rate of fire in a pistol which works perfectly in any weather conditions!

An Airsoft Electric Pistol which has an upgraded Gearbox with a pre-installed MOSFET, meaning you get a high rate of fire in a pistol which works perfectly in any weather conditions!

The CYMA CM.099 is a faithful replica of the infamous VSS Vintorez Sniper Rifle, a specialist Russian DMR from the AS VAL family that fires the specially-made 9x39mm. This Airsoft Electric Gun replica ticks all the right boxes for a VSS replica, including a rear-wired Stock which makes battery installation much easier than other VSS models.

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.

Finding your P90 is running out of ammo before you're done shooting? Maybe you think your P90 just isn't quite ugly enough? Just bought a P90, have no mags but a pile of old M4 highcaps? This magazine solution from CYMA will make you all happy. Huge Capacity to help you dominate the field, borrow your boring AR user mates magazines and hose the enemy down with a support weapon that fits in your pocket, the CYMA Mag adaptor Box mag is doing double duty!

If you want glowing BBs without making your primary any longer, the CYMA Tracer HOP-Up Chamber for M4/AR-15 AEGs is a great shout! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub. 

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself. 

While it is designed for use with the CM.097 series and other CYMA Platinum M4/AR-15 AEGs, this unit should work with most M4/AR-15 AEGs on the market, potentially requiring modifications to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your CQB primary with the CYMA Tracer HOP-Up Chamber for M4/AR-15 AEGs?

Custom external components come together to create one unique looking M4. Constructed from tough, but lightweight polymer, the M4 is a solid platform, supported by many systems and featuring a highly customisable top rail, which in total is 21'' in length, there are a huge array of options to customise this AEG.

With this rifle being on the longer side, it's a perfect entry level custom M4 for skirmishing outdoors and taking out longer range targets.

If you're working on a modern tactical AK build, this is the ideal magazine to complete it! The CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG is constructed from brown tinted translucent polymer with a ribbed external design, showcasing mock cartridges inside for visual realism. 

Being an Airsoft mid-cap magazine, this mag holds 150 BBs loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. Thanks to its spring-loaded internals, this magazine won't rattle as you run, making it perfect for stealthy playstyles. Whether you're building a 5.56 style AK or you run a modernised AK bristling with modern accessories and upgrades, complete your build with the CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG!

If you're looking for an affordable beginner Airsoft gun with a unique look, the CYMA CM.508 M4A1 S-System AEG should be right up your street! This M4 AEG is battery-powered and constructed predominantly from ABS polymer with an alloy version 2 gearbox based on the Tokyo Marui design. This keeps the build light and easy to move with, ideal for younger skirmishers or those looking for something lighter than a full metal primary for late in the skirmish day. 

The alloy version 2 gearbox the CM.508 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

On the outside, the CM.508 is ready for 20mm Picatinny accessories such as red dot sights, scopes, tactical flashlights, lasers and vertical grips, ready to be customised for the mission at hand. The barrel is threaded to 14mm CCW male, meaning suppressors and tracer units can be added for sneaky styling and an instinct-aiming advantage. If you want to try your hand at Airsoft skirmishing or target shooting without breaking the bank, the CM.508 M4A1 S-System AEG from CYMA is the most affordable way to do it!

The CYMA CM.121S is a replica of the fearsome Desert Eagle in Airsoft Electric Pistol form with a twist. This AEP is built around a MOSFET which leaves you with a savage Rate of Fire and much higher performance than a normal AEP.

The CYMA CM.121S is a replica of the fearsome Desert Eagle in Airsoft Electric Pistol form with a twist. This AEP is built around a MOSFET which leaves you with a savage Rate of Fire and much higher performance than a normal AEP.

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

A Full Metal Airsoft Shotgun which is Tri-Burst and Spring Powered, meaning it will throw 3 x BBs down range towards your target with each pump of the Shotgun (and pull of the trigger). This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail.

A Pump Action, Spring Powered Tri-Burst Airsoft Shotgun, which accepts an Airsoft Shotgun Shell inside the breech, and will fire three BBs which each Trigger pull. This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail, as well as a Shell Holder, Speedloader and Shotgun Shell.

Get into Airsoft skirmishing with a modern tactical variant of the world renowned and iconic AK47.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

The CM.028A comes with some tactical upgrades such as 20mm RIS/RAS railed handguard and threaded barrel to attach your favourite accessories.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box..

If you want the front end your AK Airsoft gun to have the vibe of a medieval war mace, this muzzle brake should do the trick! The CYMA DTK-3 Russian AK Muzzle Brake is constructed from steel and replicates the real Zenitco DTK-3, one of the latest enhancements for the AK platform, straight out of Russia. The brake follows the typical Zenitco aesthetic of pure aggression and combines a large 3-port muzzle brake with a glass breaker front to form one of the most menacing muzzle devices we have seen yet.

The brake is threaded for 24mm CW Russian AK threads and also includes a 14mm CCW male thread adapter, making it compatible with almost any Airsoft AEG or GBBR. If you want your primary to make the enemy team shake in their boots, this is your best shot!

If you have lost or damaged your original AK AEG bolt carrier it will probably still work, but man, is it ugly! CYMA's Charging Handle/Mock Bolt for AK AEG is a drop-in replacement part which solves this aesthetic issue, providing a black-finished alloy mock bolt carrier mimicking the finish applied to the real AK-74 series bolt carriers. This part will fit almost all CYMA AK AEGs and should also fit others with TM AEG compatibility. 

If you're searching for more mags for your CM.136 EBB, here they are! CYMA's 15rnd Magazine w/ 11.1V 350mAh LiPo Battery for CM.136 Grach is loaded through the feed/fill window on the top using a speed loader or by hand, designed specifically for the CM.136 Grach EBB with an 11.1V LiPo battery built-in. 

The integral battery is charged using the cable included with your CM.136 via the charging port on the baseplate. As with all LiPo batteries, this battery MUST be charged using a LiPo balance charger through the balance port. Standard LiPo safety applies, including not leaving your battery charging while unattended and always using a battery charging bag. Keep your super fun EBB Grach running for longer in-game with the CYMA 15rnd Magazine w/ 11.1V 350mAh LiPo Battery for CM.136 Grach!

A Mid-Cap Magazine for SR-25 / AR-10 Platform Rifles that accept a 7.62x51mm STANAG Magazine. It is a Spring Powered Magazine that is filled using a Speedloader, and will feed until empty without any rattle. With a Steel Outer Shell, this is a seriously strong and realistic Magazine, which is perfect for staying in the fight for longer without refilling. As an added bonus, it is compatible with CYMA, A&K as well as Tokyo Marui branded Rifles.

If you want a long-boi magazine for your B9 AEP but you hate battle rattle giving you away, this mag was made to meet your needs! The CYMA 80rnd Long Mid-cap Magazine For CM.132/126 B9 AEP follows the external format of the CYMA AEP High-caps but is a rattle-free spring loaded mid-cap which should keep those with a more sneaky playstyle at the top of their game.

The magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 80 6mm Airsoft BBs; a significant increase over the standard AEP magazine. Compatibility-wise, this magazine is suitable for the CYMA CM.126, CM.126S, CM.132 and CM.132S B9 style AEPs and is unlikely to work in other designs.

Whether you are a pump action shotgun fan or you fancy a change of pace for CQB, the CM.370M M1014 M4 Super 90 Full Stock will be an asset to your game, if you have the skills that is! This shotgun is built on the proven Tokyo Marui tri-shot design but boasts full metal construction to make it more realistically weighted with the cold, means business feel of metal in the hands.

If you are building a British Army or USMC loadout, this shotgun is ideal to throw on a sling and keep handy for close encounters, especially if you are the type that is through the door first, leading from the vanguard. Whether you are a CQB specialist or you want a realistic shotgun secondary to enhance your loadout, the CYMA CM.370M is a great choice!

The CYMA CM.051 is a replica of the classic 'Chicago Typewriter' Thompson Submachine Gun, AKA the "Tommy Gun". The CM.051 comes complete with all the correct furniture, in a beautiful and well-toned Faux Wood finish. 

This version of the Thompson has a few key differences from the M1A1 Military variant, mainly cooling fins on the barrel and the integrated Foregrip with/ finger grooves. Complete with a 550rnd Drum Magazine, this is the perfect Airsoft Electric Gun for someone who wants to stand out from the crowd, is interested in a historical or roleplay loadout, or just wants to suppress the enemy to bits using something that isn't an M4, the CYMA CM.051 is perfect for you.

Need somewhere to store that THICC battery? This will do the job. Made from strong polymer this battery case weighs next to nothing meaning less overall weight when you add your battery. This battery box attaches to any 20mm RIS system but its slim and long design is optimized for SMG-5 variants with 20mm RIS systems installed.

If you're running the super cool CYMA CM.136 Grach EBB as your sidearm, this is the place to stow it! The CYMA Retention Holster for CM.136 Grach EBB Pistols is specifically designed for the CYMA CM.136, meaning no worries with compatibility and a flawless fit. This is a retention level 2 holster, meaning it requires the external button to be pressed to draw the pistol which results in greater security than level 1 holsters, ideal for aggressive skirmishers who get stuck right in!

The holster comes pre-fitted with a "paddle" mount attached via the common 30mm toothed rotary interface. The paddle mount fits practically any belt, from wide tactical belts to regular civilian belts and the rotary interface allows you to adjust the draw angle to suit your playstyle and work around anything else you may have on your belt kit. 

A massive advantage of the rotary interface is the wide variety of different wear options it provides, from MOLLE mounts to shoulder harnesses and drop leg panels. No matter how you plan to run your CM.136 Grach EBB, the CYMA Retention Holster is good to go!

If you have decided to get an AEP for those frosty days where GBBs simply won't work but you have a taste for the finer things in life the CYMA EMG CM.135S Salient Arms BLU AEP would suit you perfectly! This AEP is manufactured by CYMA and licenced by Salient Arms through EMG, and boasts full metal construction and a pre-installed MOSFET to give it an impressive trigger response and rate of fire.

While the slide doesn't cycle, this AEP is no slouch, being equipped with most of the ergonomic upgrades that make the Gas Blowback SAI BLU such a pleasure to shoot and a highly visible red light-enhancing front iron sight paired with an anti-glare rear sight for fast target acquisition. The BLU also has a 14mm CCW male threaded outer barrel protected with the classic Salient Arms style thread protector, meaning, unlike most AEPs, this one is ready for a tracer unit right away! If the plain jane looks of most AEPs have put you off, this stylish and cutting-edge design should seal the deal!