Delta Armory Airsoft

If you're in search of a magnified rifle scope but want something lighter and more compact, set your sights on the Delta Armory 4x32AOEG Illuminated Rifle Scope. Packaged with a pair of 25mm scope rings for 20mm Picatinny rails, the 4x32AOEG is ready to mount on any Airsoft gun with a 20mm top rail but is ideally suited to longer-ranged platforms such as DMRs and sniper rifles. 

Many Airsoft optics provide far more magnification than needed and a side effect of this is tremendous overall length and excessive weight. The Delta Armory 4x32AOEG gives you only what you need to get a clear sight picture at Airsoft ranges, including windage and elevation adjustment and a parallax adjustment ring surrounding the objective lens. The reticle can also be illuminated for maximum visibility, offering the choice of red or green illumination with 5 brightness settings for each colour. 

If you're the type of DMR or sniper rifle user who doesn't need an optic capable of viewing Venus to get the job done, opting instead to focus on agility and in-game functionality, this is the scope for you!

If you're looking for an alternative to red dot sights with a long-range leaning, the Delta Armory 4x32 FPCO Illuminated Riflescope is a fantastic choice. A compact, fixed 4x magnification optic with a similar vibe to the famous ACOG series, the FPCO boasts modern styling with its piggy-back 20mm Picatinny rails and offers either red, green or blue reticle illumination. 

The reticle itself is a mildot reticle, offering vertical and horizontal stadia lines so you can lead moving targets and adjust on the fly for targets at the pinnacle of Airsoft effective range. The 4x32 FPCO is equipped with an integral 20mm Picatinny rail mount, making it ready to mount on any 20mm rail without the need to buy extra scope rings or other mounting solutions. If you want to identify and engage targets more effectively at mid to long-range, the Delta Armory 4x32 FPCO Illuminated Riflescope belongs on your gat!

If you've got motor issues, the Delta Armory Standard AEG Motor; Long Shaft is the most affordable replacement on the market! This is the standard Delta Armory motor with a long motor shaft, meaning it is compatible with M4/AR-15, P90, SMG-5 and G3 AEGs.

The pinion gear is a "type O", meaning it is compatible with aftermarket type O pinion gears and both the pinion gear and pinion spring are pre-installed. If you're in desperate need of a replacement motor and don't want to part with a chunk of cash, the Delta Armory Standard AEG Motor; Long Shaft is your best bet!

If you prefer your scopes compact without functionality compromises, the Delta Armory 3-9x40 Illuminated Short Rifle Scope should be right up your street. This variable magnification rifle scope measures less than 20cm in overall length, making it ideal for platforms with less rail space needing a long-range optic. 

Offering adjustable 3-9x magnification, red or green reticle illumination with 5 brightness levels and adjustable windage, elevation and focus, this short rifle scope doesn't compromise when it comes to features and even comes packaged with scope rings and a CR2032 battery so you can mount it and get shooting straight away. If you have the "size doesn't matter, it's how you use it" mantra when it comes to optics, this is the ideal scope for you!

If you want to turn your version 2 gearbox-equipped AEG into a true space gun, the Delta Armory EAGLE™ Programmable MOSFET Control Unit is one of the most affordable ways to do it. The EAGLE™ is compatible with any Airsoft AEG which uses a version 2 gearbox and improves trigger response and rate of fire through its gains in electrical efficiency, amongst its many other benefits!

The EAGLE™ offers more programmable options than many of its rivals in the cheap MOSFET game. These include 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only, 5 levels of trigger sensitivity adjustment and adjustable pre-cocking, with 6 levels to choose from. Active braking can also be turned on or off and all programmable options can be set using the trigger and fire selector of your AEG, avoiding the additional expense of needing an app or PC connectivity to take advantage of the wealth of programmable options available. 

Naturally, the EAGLE™ will require a certain amount of skill and expertise to install so if this is your first time, we recommend consulting an experienced technician. Compatibility-wise, the EAGLE™ is designed for M4/AR-15 version 2 gearboxes specifically and should be compatible with most V2 gearbox shells on the market, though we have not yet confirmed whether it will work with G3 and SMG-5 platforms. If you're looking for an affordable way to add fancy features to your M4/AR-15 AEG, the EAGLE™ Programmable MOSFET Control Unit from Delta Armory is exactly that!

If you want the ACOG look for your mid-range engagement playstyle, this is the perfect ACOG for you! The Delta Armory ACOG Style TA01 4x32 Rifle Scope is patterned after the real steel TA01, used by UKSF during the Task Force Black era, US SOCOM as part of the SOPMOD Block 1 M4A1 update, the British Army prior to the adoption of the ELCAN LDS along with multiple other branches of special forces around the world.

Just like the real steel ACOG, this has a 4x fixed power combat optic (FPCO), optimal for battling foes in the outdoor . With an integral 20mm Picatinny mount, alloy BUIS mounted on the top of the housing and 5 brightness settings for the red or green illuminated reticle, this optic packs in a lot of functionality, even if you aren't bothered that it looks like an ACOG!

If your M4/AR-15 is due a style up, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need! This unique handguard boasts hexagonal vent ports, M-LOK slots at 3, 6, and 9 o'clock and a 20mm Picatinny rail up top, ready for your choice of M-LOK or 20mm Picatinny accessories. The vent ports both look fantastic and reduce weight considerably, giving you a fast-to-point front end and slick external styling. 

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. The HEX handguard also includes the correct barrel nut to mount it, pre-installed inside the handguard and constructed from aluminium. 

As with most M4/AR-15 handguards, you'll need an M4/AR-15 barrel nut wrench to install the HEX but it should fit most M4/AR-15 receivers on the market, AEG or GBB. If you're looking for a fresh look for your AR platform and want more accessory options with less overall weight, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need!

If you're working on a featherweight M4 build, Delta Armory has the buffer tube for you! The Polymer Buffer Tube for M4/AR-15 AEG is compatible with most Airsoft M4/AR-15 platform AEGs and should also fit AR-9 AEGs which use the same stock mounting lug as standard Marui-spec M4 AEGs.

Providing 6 positions of stock adjustment for whatever M4/AR-15 sliding stock you mount, the tube is constructed from high density polymer with a textured matt finish and is solid as a rock, despite its ultra-low weight. The set also includes the correct length mounting bolt and spacer so you won't have to work too hard to fit it!

If you play a lot of CQB, a tactical flashlight will be an asset to your setup. The Delta Armory Defender Shield Tactical Flashlight is a highly flexible unit capable of being used as a handheld light or weapon light, packaged with a pressure switch tail cap and equipped with a push button tail cap as it comes. Also included is a 20mm Picatinny ring mount to allow you to mount it to your primary and a lanyard so you can carry it as a handheld light and avoid dropping it in wet weather.

The Defender Shield is powered by the included rechargeable18650 Lithium battery but the charger is not included. Compatible chargers can be found by putting "18650 Battery Charger" into your favourite search engine. If you're kitting out your primary for CQB or night skirmishes you need this on your primary!

If you've lost your front body pin, you're in luck! The Delta Armory Front Body Pin for M4/AR-15 AEGs is a replacement original part for Delta Armory M4/AR-15 AEGs but should also fit most other brands, though we cannot guarantee it. The set includes the front receiver pin and retention screw and both are constructed from steel.

If you're looking for the middle ground between an unmagnified red dot sight and a rifle scope, the Delta Armory 2x40 Fixed Power Red/Green Dot Sight; Railed is a good shout. This red dot sight offers 2 x zoom, allowing you to get a clearer view of your targets at long range without adding too much weight to your primary. 

As with similar 1x red dot sights, the 2x40 Fixed Power railed offers the choice of either a red or green reticle in 5 different brightness levels so you can get it set perfectly for your environment. The 20mm Picatinny rail mount is integral, meaning a strong design and nothing extra needed to mount it on any Airsoft gun with a 20mm rail. Along the top and sides, we are treated to extra 20mm Picatinny rails machined into the housing, meaning you can mount extra accessories to the sight itself to save space on your handguard. 

Whether you want a bit of zoom to handle long-range threats without adding too much weight to your setup or you seek a futuristically styled optic which looks great on any sci-fi style build, the Delta Armory 2x40 Fixed Power Red/Green Dot Sight; Railed is a fine choice!

If you need affordable mags for your M4 but insist on maximum realism, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is ideal. Unlike similarly priced Mid-cap magazines, this mag is constructed with a realistic stamped steel shell, holding 130 BBs loaded through the fill/feed port on top using a speed loader or loading tool. 

Compatibiity-wise, this is in every way a standard M4/AR-15 AEG mid-cap and should work in the vast majority of M4, SCAR-L and L85 AEGs. If you're a few mags short of a full loadout, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is a great way to tool up on the cheap!

If you're working on a classic M4A1 build or you broke your handguards and need cheap replacements, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are ideal. These handguards are constructed from high density polymer with the classic M4A1 ribbed design and a slightly wider profile than XM177 handguards. 

These are two-piece handguards designed to mount to M4/AR-15 delta rings found on M4A1, XM177, CQBR and other classic M4 configurations. If you aren't sure if these handguards are right for your AR, contact us for clarification. Ideal for lightweight builds or the retro aesthetic, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are affordable and functional!

The Delta Armory EGL/EAGLE Stock for M4/AR-15 features a slimline design which is unique to some of the latest releases from Delta Armory. It features a QD sling socket on either side, a low-profile adjustment lever on the bottom together with conventional "footman loops", aka sling slots.

The highlight of this stock is its rubber butt plate featuring lattice checkering and an angled section at the toe for providing grip in the most modern shooting stances, with or without body armour. It's the perfect low-profile stock for any skirmisher who hates snagging the back of their rifle on the surroundings!

If you've lost the butt plate from your Delta Armory or Krytac battery stock, this is your lucky day! This Butt Plate is a replacement original part from Delta Armory, compatible with both the Delta Armory and Krytac Battery stocks. The butt plate has texture and a Delta Armory logo on its contact surface, along with textured tabs on each side which lock it into the stock itself and allow easy access to the battery compartment.

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 30mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard Picatinny rail sections, often found atop your Airsoft platform. To secure your rifle scope, you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you are rocking the Delta Armory M24 R700 Sniper Rifle and need some spares for the battle, you're in luck! This magazine is designed exactly for this platform and holds 24 BBs, not a lot, but when you consider it's for a sniper rifle, a couple of these will last you a long time on the battlefield.

With spare Delta Armory 24rnd Magazines, you'll be able to stay in the battle for longer, camping in the perfect position, waiting for the unfortunate opponents to cross your sights.!

If you've lost your front body pin, you're in luck! The Delta Armory Front Body Pin for M4/AR-15 AEGs is a replacement original part for Delta Armory M4/AR-15 AEGs with a polymer receiver but should also fit most other brands, such as Specna Arms, Lancer Tactical and Evolution. The pin slides straight into your receiver and may require some force to ensure it is tightly secured.

Keep your assault rifle in one piece with a replacement Delta Armory Steel Front Body Pin For M4/AR-15 AEGs, nobody wants their receiver to fall to bits out on the battlefield!

If you're looking for an affordable sniper scope with adjustable zoom, the Delta Armory 3-9x40EG Illuminated Rifle Scope w/ Scope Rings is exactly that! Constructed from aluminium with multi-coated glass lenses, this scope boasts a mildot reticle with illumination in either red or green and 5 settings for each so you can get a clear view of your target in any ambient light level. 

Intended for long range spotting and engagements, the 3-9x40mm Scope offers a wide 40mm objective lens for an ample field of view, helping you avoid tunnel vision and potentially getting flanked. The set includes 25mm/1-inch scope rings for 20mm Picatinny rails, giving you everything you need to get on target at long range. If you're working on your first sniper rifle build or need a beast of a scope for your assault rifle to handle long-range threats, the Delta Armory 3-9x40EG Illuminated Rifle Scope w/ Scope Rings is a solid choice!

If you're seeking a long-range scope for your sniper rifle or DMR, the Delta Armory 3-9x50EG Illuminated Rifle Scope with Mounts is a good shout. This variable magnification riflescope offers 3-9x zoom, reticle illumination in either red or green, toolless adjustment for windage and elevation and a fast focus dial at the rear to get a nice, clear view of your target. 

Included in the set are a pair of 20mm Picatinny scope rings, a CR2032 button cell and a cleaning cloth, giving you everything you need to get on target straight away, though we recommend pairing this sight with a lens protector to avoid damage from incoming fire. Whether it's going on a sniper rifle, DMR or standard assault rifle, the Delta Armory 3-9x50EG Illuminated Rifle Scope with Mounts is ideal for any long-range playstyle!

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System. Keeping your scope close to your rail is good for seeing exactly where your BBs go after firing them.

Being a two-piece design, and coming included with an Allen Key, they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 25mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you are looking for an easy way to make your Airsoft platform exclusively a DMR or CQB beast, this is worth checking out! The Delta Armory Programmable ETU Processor Unit for V2 Gearbox; Semi Only replaces your conventional trigger assembly and offers semi-automatic fire only with adjustable pre-cocking, which can be programmed in using the fire controls of the AEG itself. 

This ETU should fit most M4/AR-15s which use a version 2 gearbox, but we only recommend this part for experienced techs and those in the know when it comes to Airsoft internal upgrades. The ETU is also pre-wired to a Deans/T-Plug battery connector in rear wired configuration and spade connectors for your motor, so you shouldn't need your soldering iron!

If you've stripped a gear or are working on a custom-built gearbox, the Delta Armory 18:1 Steel Gear Set is a great affordable option to get your build online! Constructed from steel, these 18:1 standard ratio gears are compatible with both version 2 and version 3 Airsoft gearboxes, offering 1 gear cycle per 18 motor cycles (18:1). 

The set includes the Spur gear, Bevel gear and Sector gear. If you need a cheap way to fix up your AEG or like to keep spares on hand just in case, the Delta Armory 18:1 Steel Gear Set belongs in your bits box!

If you want to reload faster while keeping your eyes up, the Delta Armory Flared Magazine Well Extension for P-Series GBB Pistols is the key! This flared magwell is constructed from CNC machined aluminium and is compatible with the Delta Armory DA-P series EU17 GBB range. It may fit other brands, but we cannot guarantee it! 

Flared magazine wells have been a popular upgrade for competition pistols for decades now but have recently found their way onto high-end tactical sidearms intended for combat. Designed to guide your magazine in so you can reload "eyes-up" or speed up your reloads without risking missing the magwell, a flared magazine well can save you hours of training and get you back online faster, ready to bag that all-important kill!

On either side, Delta's Flared Magazine Well Extension includes discretely yet cleanly engraved Delta Armory branding, matching well with the aesthetic of the DA-P series for a professional, completed look. The front features a slight extension designed to function as a palm rest, ensuring you have a consistent grip and thus maximum accuracy every time you draw your sidearm. If you want to reload like John Wick but don't have time to train all day and night, the Delta Armory Flared Magazine Well Extension for P-Series GBB Pistols will give you the edge you need!

If you're working on a high-speed or high FPS build, the Delta Armory Version 2 CNC 8mm QSC Gearbox Shell will save you a lot of heartache in the long run! This ultra-strong version 2 gearbox shell is CNC machined from the best aluminium around, known as 7075 T651. This means if you're running a super strong spring or going for a dual-sector gear build, this gearbox shell has what it takes to keep running in the long term, being considerably stronger than standard alloy gearbox shells.

The QSC Gearbox shell also features radiused cylinder window corners to better distribute force and is pre-cut for Gate TITAN/ASTER, Perun Hybrid or Delta Armory ETU MOSFET systems, meaning no need to get the Dremel out to add advanced functionality. The bearing ports are 8mm in diameter, making this the perfect host for Bolster Armouries EZO Ball Bearing Bushings. If you're reaching for the stars when it comes to performance and want your build to last more than a few bursts, the Delta Armory Version 2 CNC 8mm QSC Gearbox Shell is what you need!

If you're running a Delta Armory DA-P series EU17 GBB pistol and want to reload faster, this is the key! The Delta Armory Extended Magazine Catch for P-Series GBB is constructed from high density polymer, designed specifically for the DA-P series but potentially compatible with other Gen.3 style EU17 frames (no guarantees though!).

This extended magazine release features a textured surface for optimal grip in all weather and is much wider than the standard mag release, making it easier to reach for smaller hands. The set includes the entire mag release assembly other than the spring, though the original mag release spring used in the DA-P series is a perfect fit. A super affordable upgrade to make pistol handling much easier, this Extended Magazine Catch is just what you need to speed up your reloads!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!