Electric Airsoft Assault Rifles

If you are looking for a lightning-fast PDW which marries superb build quality and impressive internals with licenced trademarks, check out the EMG TROY SOCC PDW M4/AR-15 AEG! This compact, full-metal AR platform boasts full licenced trademarks from Troy Industries and a slick modern design at the cutting edge of ergonomics. 

The handguard is a fantastic replica of the real steel Troy 7.6" M-LOK handguard, the muzzle device is a dead-on match for the hyper-aggressive Troy Medieval Flash Suppressor and the stock is based on the real steel SB Tactical SBA3 Brace but with a rubber butt plate so it can be shouldered like a proper stock. Those who like the latest civilian tactical platforms from the real steel world are going to love this!

On the inside, things are equally impressive, boasting a pre-upgraded version 2 gearbox fitted with 8mm bushings, a polymer piston with a full steel tooth rack, steel ball-bearing spring guide and an in-line MOSFET to improve trigger response, electrical efficiency and trigger contact lifespan. If a compact AR is on the cards for your next purchase and you like the elite real steel look, the TROY SOCC PDW should suit you perfectly!

If you're just starting your Airsoft journey and looking to get involved without spending too much, you're in safe hands with the CYMA CM.513 M4 SD RIS AEG! A proven platform made even better in its latest iteration, the CM.513 is part of CYMA's "Sport" line, rocking a lightweight and handy build with no performance compromises, ideal for those with less physical strength or those who like to conserve energy!

The alloy version 2 gearbox inside the CM.513 is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.513 is inspired by real-world integrally suppressed M4/AR-15 rifles designed for stealth in a close-quarters environment. The handguard is a 20mm Picatinny quad-railed example, ready for vertical or angled grips, lasers or tactical flashlights. The receiver is also railed and ready for a red dot sight or scope but comes with flip-up iron sights to get you started. If you've been searching for an affordable, reliable and well-equipped Airsoft primary for your first foray into the sport, the CYMA CM.513 M4 SD RIS AEG is one of the best options out there!

If you're just starting your Airsoft journey and looking to get involved without spending too much, you're in safe hands with the CYMA CM.513 M4 SD RIS AEG! A proven platform made even better in its latest iteration, the CM.513 is part of CYMA's "Sport" line, rocking a lightweight and handy build with no performance compromises, ideal for those with less physical strength or those who like to conserve energy!

The alloy version 2 gearbox inside the CM.513 is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.513 is inspired by real-world integrally suppressed M4/AR-15 rifles designed for stealth in a close-quarters environment. The handguard is a 20mm Picatinny quad-railed example, ready for vertical or angled grips, lasers or tactical flashlights. The receiver is also railed and ready for a red dot sight or scope but comes with flip-up iron sights to get you started. If you've been searching for an affordable, reliable and well-equipped Airsoft primary for your first foray into the sport, the CYMA CM.513 M4 SD RIS AEG is one of the best options out there!

If you're getting into Airsoft on a tight budget and you're an AK fan, the CYMA CM.520 AK-47 Tactical AEG w/ Solid Stock is the perfect starter platform. Made predominantly from high-density polymer with an alloy outer barrel, this AK is part of CYMA's new "Sport" range; lightweight and handy with no performance compromises, ideal for those with less physical strength or those who like to fight easy!

Inside, the CM.520 has a respectable feature set including some important pre-upgraded parts, keeping it competitive on the field despite its entry-level price point. The alloy version 3 gearbox is equipped with steel 18:1 gears running on 7mm steel bushings, a reinforced nylon piston, piston head and cylinder head and a type 0 cylinder, all of which are compatible with aftermarket upgrade parts. The inner barrel is a 6.03mm tightbore example, giving you improved accuracy and higher FPS from the same strength spring, a thoughtful pre-upgrade for long-range effectiveness.

On the outside, the CM.520 is rocking a 20mm Picatinny quad-railed handguard, offering a 20mm rail on top for a red dot sight, another on the bottom for a vertical grip and two short side rails, ideally suited to a tactical flashlight or aiming laser. Just like a real AK, the controls are super simple and easy to master and when paired with its lightweight and agile build, this makes the CM.520 AK-47 Tactical AEG w/ Solid Stock a force to contend with either outdoors or in CQB!

If you're looking to get into the sport of Airsoft and want something ready for the battlefield, this is the perfect beginner rifle for you. Made predominantly from high-density polymer with an alloy outer barrel, this AK is part of CYMA's new "Sport" range; lightweight and handy with no performance compromises, ideal for those with less physical strength or those who like to fight easily!

The alloy version 2 gearbox the CM.507 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

This cheap AEG is a great choice for any player looking to start their Airsoft journey with a budget-friendly option that will have no trouble competing either in CQB or the wide spaces of outdoor sites. The widely supported and ever-popular M4 platform ensures plenty of room for aftermarket external upgrades to make the gun unique and truly yours. Whether this is your first step into the world of Airsoft or if you're a pro looking for a cheap project gun to customise, we are sure you will be impressed with the CM.507!

If you're just starting your Airsoft adventure and need a cheap starter replica which can do it all, the CYMA CM.506 M4A1 RIS CQB AEG Rifle is ideal. This M4/AR-15 platform AEG is constructed almost entirely from high-density polymer with an alloy outer barrel and trim parts, keeping the build lightweight and agile, not to mention cost-effective. While it weighs practically nothing (only 1.7kg!), the CM.506 doesn't feel flimsy thanks to its use of high-density ABS polymer. Inside we are treated to surprisingly well-equipped internals, offering respectable performance in both outdoor and indoor skirmishes.

The alloy version 2 gearbox the CM.506 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.506 is absolutely mission-ready, equipped with a 20mm Picatinny quad rail handguard and 20mm railed receiver, ready for any 20mm Picatinny accessories you need, from red dot sights and scopes to vertical foregrips, laser aiming modules and tactical flashlights. The alloy outer barrel is rocking 14mm CCW male threads, meaning you can add a tracer unit to make your BBs glow or a suppressor for sneaky styling. If you're ready to get into the sport with one of Airsoft's most popular platforms, the CYMA CM.506 M4A1 RIS CQB AEG Rifle is ready for you!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed.

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed.

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

A new electric 6mm airsoft rifle made by NUPROL as a budget entry level RIF but without compromising on quality, and is constructed from polymer this weapon is light weight but tough enough to handle the rigors of an airsoft skirmish. The gun is available in a variety of colours allowing you to pick the perfect gun to match your kit.

The gun features plenty of rail space for attaching aftermarket external parts for customisation, with plenty of options for upgrades available this gun simply cannot be ignored.

The M904 series of Airsoft AEG are some of the latest guns from Double Eagle (DE) Airsoft featuring their latest Electronic Fire Control System which allows for 1-5 Round Burst, a Bump fire Trigger, and boasts a gearbox and battery protection system. Not only does the replica come with an intelligent control system, it is based off he M4 platform, and comes with a full length top rail and MLOK handguard for many customisation options, as well as a compact CQB sliding stock to keep everything as tight as possible.

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

If you want to get started with Airsoft but CBA figuring out what you need by yourself, the New Player Bundle is ideal for you!

This bundle includes the Delta Armory DA-B09 BRAVO™, one of our most popular M4 platforms known for its great performance-to-price ratio, two 9.6V Ni-MH Batteries and Charger, two extra Mid-Cap Magazines, a Speed Loader, and a 1KG Bag of BBs to get you up and running.

The only thing we have left out is eye/face protection as this is often a case of personal preference. We recommend the Empire VFORCE™ Armor Full Face Mask if you want an affordable full-face mask, otherwise, you can check out our eye protection and choose your favourite by clicking here!

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

An Electric Airsoft rifle based on the world famous and seemingly timeless AK47, now updated with a more practical, and tactical configuration! Complete with a side folding stock, folding vertical foregrip and handguards sporting 20mm Picatinny rails, the CM.028U is perfect for PMC impressionists, and those who want something with rails which isn't an M4!

If a DMR is on the cards, the Delta Armory DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG is a fantastic choice on which to base your build! Boasting full metal construction and plenty of pre-upgraded internal parts, this M4/AR-15 AEG platform is rocking a lengthy 16-inch outer barrel, giving it the appropriate looks to suit a DMR build.

To make matters all the sweeter, the inner barrel is a 6.03mm tightbore measuring 420mm in length and the pre-installed EAGLE MOSFET allows you to program the trigger for semi-automatic only. Coupled with its quick-change spring system, the TEMPEST 2 is probably one of the easiest DMR conversions out there! Amongst the EAGLE's other tricks, we have the option to use burst modes of various durations, binary trigger, sniper delay, AUG mode, pre-cocking, trigger sensitivity and active braking.

For any long-range oriented build, the DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG would make a fantastic starting point but is already very well equipped to compete as it comes. If you're seeking a longer platform for outdoors work and want some advanced features thrown in for a remarkable price, the TEMPEST 2 is your best bet!

If a DMR is on the cards, the Delta Armory DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG is a fantastic choice on which to base your build! Boasting full metal construction and plenty of pre-upgraded internal parts, this M4/AR-15 AEG platform is rocking a lengthy 16-inch outer barrel, giving it the appropriate looks to suit a DMR build.

To make matters all the sweeter, the inner barrel is a 6.03mm tightbore measuring 420mm in length and the pre-installed EAGLE MOSFET allows you to program the trigger for semi-automatic only. Coupled with its quick-change spring system, the TEMPEST 2 is probably one of the easiest DMR conversions out there! Amongst the EAGLE's other tricks, we have the option to use burst modes of various durations, binary trigger, sniper delay, AUG mode, pre-cocking, trigger sensitivity and active braking.

For any long-range oriented build, the DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG would make a fantastic starting point but is already very well equipped to compete as it comes. If you're seeking a longer platform for outdoors work and want some advanced features thrown in for a remarkable price, the TEMPEST 2 is your best bet!

If you're in search of a lightweight rifle that doesn't compromise on style then you're in luck! The Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG is constructed almost entirely from polymer, making it perfect for new skirmishers or veterans looking for something easier on the arms. This version is SA-F09 Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high-density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best-value AEG platforms on the market. Whether you're a new skirmisher looking for a long rifle shape with more features than the average or a veteran looking for some precision with a lightweight DMR-type, the Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG will be an asset to you!

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

If you need a light and tight AR PDW platform but nothing on the market currently scratches that itch, the Double Eagle M923G DEX556 may well be the one! This M4/AR-15 style AEG is constructed primarily from high density polymer with alloy and aluminium parts where needed and is packing the seriously slick Double Eagle FALCON EFCS MOSFET pre-installed for a frightening trigger response, 11.1V LiPo compatibility and a crazy rate of fire.

To deliver rounds accurately onto your unfortunate target, a 6.04mm tightbore inner barrel paired with a rotary HOP-up unit is fitted, giving you a head start over many M4/AR-15 AEGs in this price range with a raise in FPS and accuracy from the tightened bore and more effective HOP-up performance to extend your range. Whether you are in search of a new CQB primary or you like to fight light and aggressively outdoors, the Double Eagle DEX556 will see you well equipped!

If you need a light and tight AR PDW platform but nothing on the market currently scratches that itch, the Double Eagle M923G DEX556 may well be the one! This M4/AR-15 style AEG is constructed primarily from high density polymer with alloy and aluminium parts where needed and is packing the seriously slick Double Eagle FALCON EFCS MOSFET pre-installed for a frightening trigger response, 11.1V LiPo compatibility and a crazy rate of fire.

To deliver rounds accurately onto your unfortunate target, a 6.04mm tightbore inner barrel paired with a rotary HOP-up unit is fitted, giving you a head start over many M4/AR-15 AEGs in this price range with a raise in FPS and accuracy from the tightened bore and more effective HOP-up performance to extend your range. Whether you are in search of a new CQB primary or you like to fight light and aggressively outdoors, the Double Eagle DEX556 will see you well equipped!

An electric powered M4 based Airsoft replica, which is constructed mainly from Polymer to offer a lightweight and manoeuvrable platform which packs a punch, and comes in a pre-two-tone Blue ready to ship for those who do not have a defence.

If you want to start your Airsoft adventure with a muffled bang, the Delta Armory DA-C05 CHARLIE™ Silent Ops 7 will do it. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a 7-inch quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the Silent Ops 7 serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long range effectiveness.

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C05 is the best AR in this style and price range we have seen!