EU Warehouse Stock

If you are looking for a compact backpack with tactical styling that won't break the bank, the 8Fields Tactical 15L Modular Assault Backpack is for you! This backpack has a capacity of 15 litres, making it rather low profile and ideally suited to those who favour agility, whether it is used for Airsoft or for scrambling through the woods in some other context!

On the outside, this backpack sports MOLLE webbing on the sides and rear, allowing you to add capacity with external pouches when you need to carry a heavier load. Also on the rear is a clip fastener, allowing you to fasten your bag tight if you're going low profile, and both straps and the lumbar pad are padded for maximum comfort no matter what load you are carrying. Internally, the contents are kept neat via dividers, suitable for carrying a 15" laptop, hydration bladder or even a weighted plate for fitness enthusiasts.

Whether you need a compact backpack that won't slow you down to take into a skirmish or you need a day-to-day backpack with some tactical trimmings, the 8Fields Tactical 15L Modular Assault Backpack will serve you well!

If you are looking for a compact backpack with tactical styling that won't break the bank, the 8Fields Tactical 15L Modular Assault Backpack is for you! This backpack has a capacity of 15 litres, making it rather low profile and ideally suited to those who favour agility, whether it is used for Airsoft or for scrambling through the woods in some other context!

On the outside, this backpack sports MOLLE webbing on the sides and rear, allowing you to add capacity with external pouches when you need to carry a heavier load. Also on the rear is a clip fastener, allowing you to fasten your bag tight if you're going low profile, and both straps and the lumbar pad are padded for maximum comfort no matter what load you are carrying. Internally, the contents are kept neat via dividers, suitable for carrying a 15" laptop, hydration bladder or even a weighted plate for fitness enthusiasts.

Whether you need a compact backpack that won't slow you down to take into a skirmish or you need a day-to-day backpack with some tactical trimmings, the 8Fields Tactical 15L Modular Assault Backpack will serve you well!

If you're looking for a unique QD red dot sight, look no further! The PCS Red/Green Multi-Reticle QD Sight for 20mm Picatinny Rail is a great choice for your Airsoft rifle; it offers a red or green dot with four different reticles for each. It is powered by an LR41 battery that can be inserted into the right-hand side of the scope.

Your choice of reticle can be selected via the dial on the rear of the sight, offering a simple dot, ringed dot, cross or ringed cross reticle, perfect for any environment or preference. With an integral QD mount, all the reticle options one could ever need along with full adjustment when it comes to zero, reticle colour and brightness, the PCS Red/Green Multi-Reticle QD Sight for 20mm Picatinny Rail is an impressive bit of kit for an equally impressive price!

A full metal spring powered pump action Airsoft 6mm shotgun that is tri-barrelled and comes with a sawn-off style pistol grip as standard.

If you're into advanced real steel rifles and are a realism fan, you're going to love this one! The EMG Noveske N4 "Ghetto Blaster" 7" MWS ZET System GBBR boasts a fantastic quality full metal build with authentic licenced trademarks across the design thanks to EMG's cooperation with Noveske Rifleworks. All of the details are a perfect match for the real Ghetto Blaster, down to its "Cherry Bomb" muzzle brake, "Super Badass" charging handle, NHR M-LOK handguard and Noveske 4th generation billet receiver.

Internally, the Ghetto Blaster is based on the legendary Tokyo Marui MWS/ZET system, meaning impressive gas efficiency, a wide range of aftermarket upgrade options and compatibility with what is widely regarded as the best M4 GBBR magazine design available today. The recoil is snappy and strong, the bolt catch and charging handle are fully functional and long range performance is very impressive thanks to its VSR/GBB spec HOP-up bucking and excellent efficiency.

A feast for the eyes with an exciting aesthetic and a firing experience which cannot be imitated by any AEG, the Ghetto Blaster GBBR is a cutting-edge piece of kit, ideal for realism focussed skirmishers. Whether you're into the distinctive Noveske aesthetic or you're looking to get to work with one of the most realistic Airsoft platforms available, the EMG Noveske N4 "Ghetto Blaster" 7" MWS ZET System GBBR will put a big smile on your face!

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

A velcro-backed combination pouch which can hold 4 x rifle magazines, 2 x pistol magazines and features a large open retention utility pouch which could hold grenades, drinks, BBs, gas and much more!

If you are in the middle of a helmet build and it looks a little bare, consider the Accessory Pouch Gen.2 by FMA. This pouch is modelled after pouches used for NVG counter weights and battery packs, but can be put to whatever use you need on the skirmish field.

If you are looking for a suppressor for your lil' AK, you have found the right one. The real world PBS-4 is designed for use on the AKS-74U rifle, but has also been seen in use on full length AK74s!

Short and compact like it's real world counterpart, but with some full metal weight behind it and some solid internals, it still packs a punch! 

This Airsoft stockless variation of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, enemy insurgents won't last long with this shotgun making quick work of them!

If you have decided to get an AEP for those frosty days where GBBs simply won't work but you have a taste for the finer things in life the CYMA EMG CM.135S Salient Arms BLU AEP would suit you perfectly! This AEP is manufactured by CYMA and licenced by Salient Arms through EMG, and boasts full metal construction and a pre-installed MOSFET to give it an impressive trigger response and rate of fire.

While the slide doesn't cycle, this AEP is no slouch, being equipped with most of the ergonomic upgrades that make the Gas Blowback SAI BLU such a pleasure to shoot and a highly visible red light-enhancing front iron sight paired with an anti-glare rear sight for fast target acquisition. The BLU also has a 14mm CCW male threaded outer barrel protected with the classic Salient Arms style thread protector, meaning, unlike most AEPs, this one is ready for a tracer unit right away! If the plain jane looks of most AEPs have put you off, this stylish and cutting-edge design should seal the deal!

If you have a Hi-Capa-shaped hole in your soul but demand realism, the EMG R613 STACCATO 2011 Hi-Capa XL GBB is what you need to fill it. This full-metal Hi-Capa platform is a perfect replica of the real steel STI/STACCATO Firearms 2011 XL, complete with licenced trademarks across the design in engraved, laser engraved and embossed form.

As one might expect with such a high-end real steel pedigree, the STACCATO is kitted out externally with a raised light-enhancing front sight paired with an anti-glare rear sight, a red dot mounting plate for RMR footprint red dot sights, a flared magazine well and slide serrations at both the front and rear. From a handling standpoint, this thing is top-tier!

Internally, the STACCATO XL is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. If you'd love to run a Hi-Capa with high-end styling which doesn't look like everyone else's, the R613 STACCATO 2011 Hi-Capa XL GBB from EMG will be an asset to your loadout!

If you're into all things Daniel or like the MK18 aesthetic, the EMG CM.105 Daniel Defense M4A1 12.5" AEG; Kestrel Basic ETU should suit you perfectly! This is the latest version of the CM.105, boasting the same superb build quality, licenced Daniel Defense trademarks and pre-upgraded gearbox components as the original with a side of EShooter Kestrel Basic ETU to add advanced functionality into the mix.

The Kestrel Basic offers programmable fire modes, including 3-round burst and binary trigger, with 6 levels of adjustable pre-cocking; a major improvement over the Zeus MOSFET of the original. Also inside the V2 gearbox are CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges.

With all the best bits of the original further improved with the EShooter Kestrel Basic MOSFET, the CM.105 Daniel Defense M4A1 12.5" AEG is as well equipped internally as it is well built externally. Fans of the Daniel Defense look couldn't ask for a better primary out of the box!

If you like your assault rifles modern and stylish, the EMG Daniel Defense M4A1 RIII 14.5" Replica AEG is perfect for you! This full-metal AEG is licensed by Daniel Defense through EMG and perfectly matches the latest real steel Daniel Defense rifles. This Airsoft rifle boasts flawless replicas of DD furniture such as the RIS III handguard, the "Grip-N-Rip" charging handle, the "Tornado" pistol grip and a DD Buttstock.

As it is based on the CYMA Platinum series, we are treated to some of the best out-of-the-box internals around. Inside, you will find a high-speed Neodymium magnet motor driving a 13:1 CNC steel high-speed gearset running on 8mm ball-bearing bushings. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.02mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

The highlight of this AEG is the Kestrel Basic ETU, which offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency. If you want a modern assault rifle that you can trust to get this job done, this is the platform for you!

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

5KU brings us an imitation of the Russian SF 9x19 flash suppressor made high quality CNC aluminium, known as the KP-9. With a large, rounded and aggressive aesthetic, the very front of the suppressor sports cut grooves and port holes to conceal muzzle flash in the real-world equivalent.

Most often seen on SMGs such as AK47s, KP9s, MP5s and Scorpions, this Airsoft replica suppressor utilises a 14mm CCW female thread so it can be fitted to any thread or adaptor that sports the corresponding male 14mm thread. With a padded foam interior that muffles your shots, this suppressor gives you what you need to sneak around and get those stealth kills in style!

If you're looking for a new outer barrel to make your M4/AR-15 AEG perfect for woodland skirmishes, the 5KU 16" Aluminium Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 16-inch outer barrel includes pin holes for mounting an M4/AR-15 front sight/gas. 

The 5KU 16" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're extending your barrel for the improved long-range effect or you just want your Airsoft rifle to look rather long and intimidating, the 5KU 16" Aluminium Outer Barrel belongs on your M4 AEG, Just remember to pick up a matching inner barrel!

If you want to bring your M1928 Thompson AEG up a level in realism, this conversion kit will do it! The  Battleaxe Real Wood Furniture Kit for CM.051 M1928 Thompson comprises a real wood stock, a real wood vertical foregrip/handguard and a real wood pistol grip. 

To fit this conversion kit you will screws and mounts from the original CM.051, the kit only includes the real wood furniture. This kit is designed for the CM.051 Thompson AEG, it may fit other brands but modification will be required. If your CYMA Thompson needs an added dose of authenticity, a real wood kit is the way to go!

Silicone oil is absolutely essential to have in order to keep your gas magazines healthy and their seals and gas routes fresh. Leda has made the application process as easy as can be, with an applicator tip and squeezy underside plunger.

This bottle contains 60ml of liquid silicone lubricant which can be applied to O-rings and gas routes in your GBB and its magazines and can also be used to add lubricant to CO2-powered guns which have a tendency to dry out over long durations.

For just a few quid you can save yourself countless amount of time and money on buying new magazines when the seals dry up, so what are you waiting for?

The perfect mount for your torch, able to fit to any 20mm RIS/RAS rail and with 5 adjustable positions.

If you're looking for a concealment edge and run a FAST helmet, the Emersongear Mesh Helmet Cover for FAST Helmets will do the trick. This helmet cover is designed to conceal the shiny surface of most FAST helmet replicas and features Velcro panels on the outside, ready for morale or I.D patches. 

The top features paracord designed for cable management or attaching natural foliage, meaning you can keep your comms wires neat and break up the outline of your head when skirmishing out in the woods. The cover is available in MC, Coyote tan and Black and should fit all FAST helmet replicas, including BJ, PJ Bump & Ballistic versions. 

A Two-Piece Outer Barrel Assembly for AR/M4/M16 Platform Airsoft Replicas, constructed to a tough standard using Aluminium. The Two Piece design allows you run the barrel in a short configuration, ending just after the A-Frame Sight Post, or in it's longest configuration with the extension piece installed. Both sections of the Outer Barrel feature a 14mm CCW Thread for the installation of Suppressors, Tracer Units and other Muzzle Devices.

If you are building your dream tactical AK, a railed dust cover can be a great addition to give you more optic mounting options, and the elite tactical look. The 5KU 20mm Railed Tactical AK Receiver Cover is designed to work with Z-Co style handguards and provides a 17-slot 20mm Picatinny rail on its upper surface, and a hinge mechanism which connects it to a Z-Co handguard for functionality similar to the ASK-74U, making battery changes a breeze for those who run a top wired AK. If you are working on your own Spetsnaz build, your AK needs this!

A 76.2mm long barrel extension for any AEG with a 14mm CCW thread on its outer barrel.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

This is for a pack of 5 magazines for the player who sees nonstop action!

A complete V6 gearbox designed as a replacement for CYMA P90 AEGs to breathe new life into your weapon.

If you have been messing around with your SMG-5 AEG and you have lost your pins, CYMA has the cure! This original parts set includes 2 body pins, one for the trigger group and one for the rear receiver/stock. The pins are constructed from alloy and are compatible with CYMA SMG-5 AEGs but may also fit others, though we cannot guarantee it.

If you have an ARCTURUS AK in your arsenal and are tired of constantly having to reload after every fight, you need this! The ARCTURUS 550rnd Hi-Cap Magazine for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine. Simply fill it with BBs at the fill window on top of the magazine and spin the wheel on the bottom to load the BBs.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position.

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings.

If AK platforms are right up your alley and you're in the market for an affordable AK-12 rifle with the added benefit of some borrowed design features from the funky AK-205, then the WELL PRO WE09 AK-12 AEG Rifle w/AK-205 Stock should definitely interest you! This updated version of the platform is styled after the latest AK-12 variants offered to civilian shooters, with improved ergonomics thanks to the new AK-205 stock and enhanced pistol grip.

This full high-density polymer AEG is lightweight and perfect for players who don't want tired arms after a day of carrying their rifle around. The polymer, however, does not mean that this AEG isn't durable. It will survive the tribulations of any skirmish with minimum cosmetic damage. The optical MOSFET is a nice addition to this AK-12 and allows the fire selector to be programmed for alternative modes of fire such as burst modes or binary trigger. This paired with the 6.03mm tightbore inner barrel allows for excellent accuracy potential straight out of the box.

Whether you are fixed on an AK-12 or you are contemplating the available AK platform options, the WELL PRO WE09 AK-12 AEG Rifle w/AK-205 Stock would make a fantastic, affordable and up-to-date primary for any modern Russian military or PMC loadout!