EU Warehouse Stock

If you are looking for extra mag pouches why not get two in one! The MOLLE Open Top Double Magazine pouch by 8Fields Tactical holds 2x M4/AR15 magazines and can be mounted to any MOLLE chest rig, plate carrier or belt, and even stacked thanks to its frontal MOLLE loops.

Each pouch has an elastic retainer at the top to hold the magazines securely as you run which can be quickly pulled aside when the need to reload arises. The pouch is constructed from 1000D Polyester, granting water resistance and extra strength thanks to its high stitch density.

A fabric magazine pouch designed to hold SMG-5 and SMG-7 magazines once adjusted by the Velcro front panels and is fully MOLLE compatible. 

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

Fed up of turning around during the heat of a firefight to hand your friend a chocolate bar? The Assault Back Panel Mod.2 may help facilitate the smooth distribution of mid-battle calories to keep your team fuelled up! The Assault Back Panel can be attached to the MOLLE loops on the rear of a chest rig or plate carrier and allow your teammates to borrow speed loaders, magazines and other equipment whilst you rightly face the enemy and open fire! This pouch includes dual utility pouches and an internal hydration pouch, suitable for a small hydration bladder (available separately).

Lower face protection is important! The WoSport Asia Steel Mesh Lower Face Protective Mask V.2 will keep your mouth and cheeks safe whilst on the battlefield. It has a steel mesh which will stop BBs, this wraps from ear to ear and over the nose, keeping all the important parts safe. Also included are some additional padding around the jaw and chin for comfort whilst wearing this mask.

The mask is fully adjustable for all head sizes, making use of some Velcro straps that go over and around the back of your head. It is also fully compatible with other face and head protection, including glasses and helmets. Keep your face safe on a budget with this WoSport Asia Steel Mesh Lower Face Protective Mask V2!

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

The Military Knee and Elbow Pads set from EmersonGear provide heavily padded externally worn knee and elbow protection, with polymer reinforcement on the exterior. The pads are secured via one elastic strap and one nylon strap, allowing you a decent amount of flexibility when running and preventing the pads from slipping down. One of the best features of these pads is the extended section below the polymer reinforcement, which functions to protect your forearm/shin and help ensure your knee/elbow is protected should the pads shift. The polymer reinforcement on the outside also facilitates knee sliding, if you are the "showy" type!

If you are keeping your eye out for a compact backpack with discrete tactical styling that won't break the bank, the 8Fields Tactical Explorador Backpack is one to watch! This backpack has a capacity of 15 litres, making it rather low profile and ideally suited to the adventurous, whether it is used for Airsoft or for scrambling through the woods in some other context!

On the outside, the Explorador sports MOLLE webbing on the sides and rear, allowing you to add capacity with external pouches when you need to carry a heavier load. Also on the rear is a velcro panel, allowing morale or I.D patches to be mounted, and both straps and the lumbar pad are padded for maximum comfort no matter what load you are carrying. Internally, the contents are kept neat via several dividers, suitable for carrying a 15" laptop, hydration bladder or even a weighted plate for the fitness enthusiasts.

Whether you need a compact backpack that won't slow you down to take into a skirmish or you need a day-to-day backpack with some tactical trimmings, the 8Fields Tactical Explorador Backpack; 15L will serve you well!

Looking for a sneaky SMG? The CYMA CM.041 SD6 is a full metal version of the sneaky SMG-5 we all know and love which has been upgraded with CYMA's BLUE Edition internals, making it as rock solid on the inside as it is externally. All of the internal upgrades are focused on reduced friction and lower stress, meaning the BLUE Edition CM.041 SD6 should provide a lifetime of superb performance and is fully compatible with aftermarket upgrades for those who want a bit more. As it comes, the rate of fire and trigger response is spectacular for an AEG without a MOSFET and is a significant step up from other SMG-5 SD6 AEGs on the market.

The real-world version of this submachine gun has been used by US Navy SEALs and UKSF in various special applications and has an iconic look which simply cannot be imitated, as much as the M4 platform tries to (Honey badger *cough*). If you want an SMG which is milsim appropriate with a plethora of internal enhancements built right in, the CM.041 SD6 would be a great tool for the task.

If you are looking for an affordable holster, 8Fields Tactical have just the thing! The 8Fields Tactical Drop Leg Holster is a basic but functional drop leg holster with a built in magazine pouch and can be added to any belt. When mounted the holster is positioned on the right side of the belt, making it ideal for right-handed users. If you want an affordable holster solution that fits most medium sized pistols, this is one of the best options!

If you're looking to load up in one go with a full complement of high quality mid-caps, EMG's Daniel Defense Mid-Cap mags are some of the best out there. These magazines are styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

These magazines are designed to be compatible with high-speed builds, so if your AEG demands a high quality magazine to keep up with its appetite, these will do the trick. Just like any other Airsoft mid-cap, loading these mags is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. These magazines are designed for the M4/AR-15 AEG platform but have also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility.

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap!

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

For those of you that like to keep things simple but effective. If you like to run a high speed low drag kit, this pouch will suit you nicely.

Constructed from tough, water resistant 1000D polyester, holding your M4 safe and secure with elasticated bungee retention, it is mounted to your MOLLE system with press stud button straps.

Also featuring front facing MOLLE straps, this pouch gives you additional customisation options, while keeping a low profile, for those players who value speeds and manoeuvrability on the battlefield.

A durable 2 point tactical sling, designed for use with Airsoft AK series weapons, from the AK47 to the various designs based on it.

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

If you are using LiPo batteries, or any other battery for that matter, the IPower LiPo Safe Charging Bag will keep your batteries safe during charging, storage and transportation thanks to its fire-resistant polymer construction. The bag is sealed at the top with a velcro flap, and comes in a variety of sizes to suit few or several batteries inside!

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types.

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types.

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types.

If you like to send the enemy spicy ball-shaped packages, this is what you need to get the job done! The 8Fields MOLLE Frag Grenade Pouch is constructed from 1000D Polyester and holds a single Airsoft frag grenade, dummy or pyro.

The pouch is shaped to house ball-shaped grenades but could also be used for other types, and is secured on the front with an adjustable strap and polymer clip. The pouch can be mounted to MOLLE webbing found on belts, backpacks, chest rigs and plate carriers via the two MOLLE hooks on the rear.

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the Airsoft GLOCK 19X. If you're a firearm fanatic who's mad about getting as close to the real deal as possible, you've come to the right place.

If you're a left-handed shooter or a dual-wielder, the 8Fields Tactical 2-Way Carry Drop Leg Holster; Left-Handed should suit you! This holster is constructed from 1000D Polyester and is adjustable in size to fit almost any medium to large pistol, even with a tactical flashlight installed. Offering a choice of belt or drop-leg carry, this holster is a very flexible design and can be mounted either to standard or MOLLE-equipped belts. 

On the outside, we are treated to a magazine pouch designed for pistol mags and extra MOLLE loops for chem lights or additional MOLLE pouches. Your pistol is held in place by a snap-button secured thumb brace and an optional bungee cord loop. The design of the holster itself also allows for various sizes of pistol (medium to large) to be fitted via its velcro size adjustment. The optional leg straps are fully adjustable, with rubber interwoven so the holster won't slip down as you run. If you're left-handed or want to run a pistol on each leg action movie style, the 8Fields Tactical 2-Way Carry Drop Leg Holster; Left-Handed is ideal!