FPS Softair

If you're working on a long-barreled AR36 AEG build, whether it's a DMR or an MG36 LMG, the FPS Softair Full Tune Up Kit for AR36 AEGs is the ideal addition to your build. This kit includes replacements for the full cylinder group, enhancing air seal, and improving longevity and overall efficiency.

The kit is optimised for inner barrels of 451-550mm in length and includes a Type F CNC Steel Cylinder, ERGAL Nozzle with O-ring, CNC Aluminium cylinder head and a CNC ERGAL Double O-ring ball-bearing advanced piston head. If you're looking for maximum efficiency and strength from your long-barreled AR36 build, you need this kit!

If you find your springs are wearing down faster than they should you need a replacement spring set!

This  pack comes with 6 different types of spring including:

• Switch Return Spring
• Tappet Plate Spring
• Anti-Reversal Lath Spring
• Stopper Arm Spring
• Selector Plates spring for Version II
• Trigger Return Spring

The springs are designed for use with version 2 gearboxes, for AEG rifles such as M4s, AR36s, SMG-5 and more!

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB01, MB04 and MB05 spring-powered Airsoft sniper rifles

Increase your electric M4/M16s power and air efficiency with an upgrade nozzle and O-ring. With its CNC Aluminium Ergal construction with smooth anodized finish, this will make a grade enhancement over your stock nozzle to used with version 2 gearboxes.

Make sure to use pure silicone oil to lubricate your cylinder head's nozzle stem before installing this nozzle.

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you to install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB-03 and MB-08 spring-powered Airsoft sniper rifles.

Upgrade your AEG with an FPS Softair Stainless Steel Cylinder and increase its reliability and performance. The cylinder is constructed from high-strength steel and is resistant to fatigue with increased durability. The cylinder is made for use with version 2 or 3 gearboxes, compatible with Tokyo Marui derived designs, with barrel lengths of 251 to 330mm.

If you love working on gearboxes or have a version 3 custom build on the cards, the FPS Softair Complete Gearbox Spring Set for V3 Gearbox belongs in your toolbox. This set includes all of the springs needed for a version 3 gearbox build, including the tappet plate spring, ARL spring, motor height spring, cut-off lever spring, trigger return spring and switch return spring.

All of the springs in this set have been manufactured by FPS Softair to be more durable than the original springs and with more precisely calculated tension for maximum efficiency. Whether you've lost a spring, are working on a version 3 gearbox build or need spares for your technical projects, the FPS Softair Complete Gearbox Spring Set for V3 Gearbox will be useful addition to your parts bin!

Upgrade your AEG with some advanced Open Steel Bearing Bushings from FPS Softair. Upgrading your bushings will decrease the friction caused by gear rotation, resulting in a higher burst speed and better energy efficiency. The open bearing ensures higher strength compared to closed because the ball bearings are larger.

Dimensions:

• Outer diameter: 8 mm
• Inner hole: 3 mm
• Thickness: 2.5 mm

Increasing the rate of fire on your airsoft rifle sometimes causes it to misfeed, resulting in dry firing. A sector gear delay will solve your feeding problems 99.9% of the time with a simple add-on.

This sector gear clip increases the time it takes for the air nozzle to cycle. Delaying the cycle improves BB feeding by allowing the air nozzle to be retracted from the hop-feed for a longer duration.

This tiny add-on could instantly transform your AEG if it has been suffering from firing issues.

Although this is designed to be a perfect fit, it is recommended that this be permanently fixed in place using superglue, after testing to prevent it from potentially loosening over time.

If you're looking for a sturdy upgrade to your AEG, the FPS Softair Piston Head O-Ring Seal is a worthy contender. Constructed from high-density rubber for a superior seal to increase the reliable and lifespan of your rifle. This O-ring is likely to improve your air consistency, which may result in increased accuracy and is compatible with most piston heads.

Upgrade your M4/M16 AEG with an FPS Softair Stainless Steel Cylinder and increase its reliability and performance. The cylinder is extremely durable and is more resistant to the constant friction caused by the piston head. The cylinder is made for use with version 2 or 3 gearboxes, compatible with Tokyo Marui derived designs and clones, with barrel lengths of 401mm to 450mm.

FPS Softair brings you a high-quality piston with a carbon fibre-reinforced technopolymer body and a full rack of steel teeth for a good combination of high strength and low weight. This is compatible with Tokyo Marui-style Version 2 and Version 3 gearboxes.

This Superlight piston reduces friction for an increased rate of fire, in addition to the overall reliability of your rifle. The sliding guides are designed to minimize friction and retain the lubricant for a long period of time and the rack seat is decentralized to favour the coupling between the piston teeth and those of the sector gear.

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable AK47, AK74, KURZ / PDW, SIG, GALIL or any version 3 gearbox AEG and is compatible with ICS, Tokyo Marui, Classic Army, VFC and more. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

Increasing the rate of fire on your airsoft rifle sometimes causes it to misfeed, resulting in dry firing in builds with a very high rate of fire. A sector gear delay will solve your feeding problems 99.9% of the time with a simple add-on.

This sector gear clip increases the time it takes for the air nozzle to cycle. Delaying the cycle improves BB feeding by allowing the air nozzle to be retracted from the hop-feed for a longer duration.

This tiny add-on could instantly transform your AEG if it has been suffering from high rate of fire issues.

Although this is designed to be a perfect fit, it is recommended that this be permanently fixed in place using superglue, after testing to prevent it from potentially loosening over time.

Upgrade your AEGs piston head to improve air seal and increase the efficiency of airflow through the cylinder. This piston from FPS Softair has ports on the front to push out the O-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

Constructed from CNC aluminium Ergal, which has been anodised, the piston head features a smooth precise surface. The piston head has ports on the front to push out the O-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape.

This is the most advanced version with 6 ventilation holes for higher speed and rate of fire, double O-ring and ball-bearing. This head is designed for version 2 and 3 gearboxes but may fit other types.

FPS Softair brings you a super high quality M4 piston with a technopolymer body and a full rack of steel teeth for a good combination of high strength and low weight. This is compatible with Tokyo Marui NGRS M4 gearboxes, aka the Version 9 gearbox. Please note, this piston is not compatible with the TM NGRS SCAR-L or SCAR-H.

The loaded technopolymer assures great mechanical resistance and dimensional precision. The rack was manufactured through the use of MIM (Metal Injection Moulding) technology since this production process guarantees dimensional accuracy and sturdiness equal to those of solid machining.

Currently considered the best for this type of use, the metal injected is SAE 4650 steel. The sliding guides are designed to minimize friction and hold the lubricant for a long period of time, so you can be safe in the knowledge that your AEG will have reliable and long-lasting cycle functionality.

If you're looking for a strong and lightweight nozzle for your P90, check this out! The FPS Softair CNC POM Nozzle with O-ring for P90 AEGs is made from CNC POM polymer, a massive upgrade from the factory polymer nozzles present in TM P90s and clones. The nozzle also includes an internal O-ring to maximise air seal and its ultra-strong POM construction is ideal for high rate of fire or high FPS setups.

FPS Softair is a fantastic company, offering high quality upgrades for unbeatable prices, all designed and manufactured in Italy. The techs at FPS recommend lubricating the nozzle step of your piston head before installation using silicone lubricant. If you're working on a beast of a P90 build and want it ready for anything, the FPS CNC POM Nozzle with O-ring for P90 AEGs is what you need!