Full Metal Airsoft Guns

If you've always fancied a WWII era platform but the lack of pre-upgraded options put you off, the Bolster Tuned StG-44 Sturmgewehr AEG is here to save the day! Translating Bolster Tuned performance into a hefty and authentic full metal Sturmgewehr replica, this utterly unique upgraded AEG was put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and plenty of successful Bolster Tuned AEG drops.

Inside, the Tuned StG-44 is rocking a Warhead 36K CNC Black Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries Stainless Steel Sector Gear Screws along with complimentary parts to keep it running reliably long term. To provide the advanced functionality everyone expects from a Bolster Tuned build, the space-aged Gate ASTER™ SE MOSFET/ETU is installed, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The stock gearbox shell was found to be woefully inadequate for Bolster Tuned performance parameters; as such, the team based the internals around the CYMA Platinum Complete V2 Gearbox, upgrading the usual parts and only keeping the best bits. Inside, the stock piston head was swapped out for the Gate EON Power Hybrid Piston Head, the tappet plate was upgraded with the FPS Softair Carbon Fibre Reinforced Tappet Plate

To ensure you get the accuracy and range Bolster Tuned platforms are renowned for, the team switched out the stock gear HOP-up unit with the Novritsch Polymer Rotary HOP-up unit and added the 4UANTUM Friction Pro High Performance AEG HOP-up Bucking to seal the deal. The stock 6.08mm inner barrel has also been swapped out for a KRYTAC 6.05mm Tightbore Inner Barrel, chosen for its high-quality internal finish and wide HOP-up window, ideally suited to the 4UANTUM bucking.

A gas powered semi-automatic M9 replica, which will cycle the slide with each shot for a realistic recoil action, and is made with a Polymer slide to ensure a snappy response from the Trigger.

A 1911 Co2 None Blowback replica by Cybergun, excellent for target practice at home or on a range. No reciprocating slide means more gas efficiency down range. However this does boost the FPS above most site limits, making it unsuitable for skirmish use.

If you're looking for a cheap and cheerful sidearm with more than its fair share of features, the Double Bell 304 Burgundy Viper Hi-Capa GBB Pistol should be right up your street! This full-metal Hi-Capa platform is based on a high-end real steel pistol we all recognise, rocking an optics-ready slide, front and rear slide serrations and a pre-installed compensator to complete the elite look.

Despite its very affordable price point, the Burgundy Viper is supplied in a wave foam equipped hard pistol case with a spare nozzle and a 20mm Weaver optics mounting plate included, giving you some elite features for one of the most affordable full metal Hi-Capa platforms on the market currently. If you're searching for high-end looks for an entry-level price, the Double Bell 304 Burgundy Viper Hi-Capa GBB Pistol is exactly that!

If you have your sights set on a sniper rifle but want something with a more militant look, the CM.702B M24 from CYMA is exactly what you need. This spring bolt action sniper rifle is based on the real steel M24 SWS, the US Army's standard sniper rifle and comes equipped with a 6.03mm tightbore inner barrel straight out of the box!

As far as affordable sniper rifles go, this is one of the most consistent we have seen, hovering around the 500 FPS mark on 0.2g BBs with only a couple of FPS deviation between shots. While it isn't based on the VSR-10 system, it is compatible with upgrade parts for the Classic Army CA/M24 but for all but the most particular snipers, upgrades shouldn't be necessary. Just slap a scope on top and get busy from your hide in the woods!

For those Hi-Capa fans who feel the need for speed, the Hi-Capa 5.1 High Speed Custom from Golden Eagle takes out of the box Hi-Capa performance to even greater peaks. The slide of this Hi-Capa has been reduced to practically nothing at all, giving it an incredibly fast cyclic rate with reduced recoil, resulting in a vast improvement in gas efficiency and shot to shot consistency. If you are the type of player who is all about performance, this Hi-Capa would be perfect for your needs, and would almost certainly excel with an HPA rig connected as it does with a standard green gas magazine. The skeletonised slide design and spiral fluted outer barrel would also appeal to those out there who appreciate the minimalist race-gun aesthetic.

If you're a fan of the Lycoris Recoil Anime TV series or appreciate sharp things, the AM.45 "Chisato" Detonics .45 GBB Pistol from Double Bell is what you need! Based on the custom Detonics .45 pistol carried by Chisato Nishikigi in Lycoris Recoil, the Double Bell "Chisato" AM.45 is a direct clone of the Tokyo Marui version and a near 1:1 match for the on-screen version. 

The AM.45 Chisato boasts full metal construction with a seriously sharp strike face compensator which Double Bell wisely chose to make from high-density polymer so no one gets hurt! The internals are all Tokyo Marui spec, meaning if you want more accuracy and range you can upgrade the HOP-up rubber and inner barrel easily, with other options available for the more technically proficient.

Whether you love a compact GBB pistol with a unique look or are a fan of Lycoris Recoil, the Double Bell AM.45 "Chisato" Detonics .45 GBB Pistol is a fantastic, affordable way to expand your collection!

A Gas Blowback Airsoft Pistol designed by WE Europe based off the 1911 Pistol Design, but in a more Compact form. The Pistol is constructed with an Alloy Frame, Slide, Internals and Magazine and with Polymer Grips.

If you are looking for a modern Hi-capa based build with speedy looks and surprising performance, keep your eye on the Golden Eagle Hi-capa 4.3 Dusty Snake! This full metal GBB pistol sports full Tokyo Marui compatibility, a 6.02mm tightbore inner barrel and an optics-ready slide with the common RMR mounting standard.

Boasting all the frills that make the modern Hi-capa platform such a competitive piece, the Dusty Snake is equipped with a stylish compensated front end, flared magazine well extension and even a hand-stippled grip; giving you exceptional gripping qualities whether you rock gloves to a skirmish or not. As a trusty sidearm or a primary pistol for CQB, you cannot go wrong with this remarkably affordable and beautiful gas blowback pistol!

A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more. 

This Gas Airsoft Shotgun is fed by standard Airsoft Shotgun Shells and a removable Gas Tank, just like the Tokyo Marui M870 series. It is constructed from Full Metal, with the exception of a Polymer Pump Handle and Stock, as well as a Rubber Butt Pad. If you're looking for the most realistic Airsoft Gas Shotgun you can get your hands on without going for a shell-ejecting model, then you're in the right place.

Bridging the gap between the start of the 20th century and the start of the 21st, the War Hawk is Nighthawk Custom's take on an ultra-modern 1911, fully licenced by Red Wolf Airsoft. This pistol comes complete with advanced contemporary features, such as light-enhancing sights, a 20mm pistol rail and an extremely comfortable grip, complete with thumb indentation no less! Fashioned from glorious brushed aluminium and coloured in suave and sophisticated black, the War Hawk is for those of you that want to keep up with more modern pistols in spec ops missions and look cool as hell while doing it!

If you have an AK-shaped hole in your arsenal the Double Bell BY-023 AKM AEG should fill that void! This AK rifle replica has all the classic AK features any enthusiast of Kalashnikov's Automatic Rifle will appreciate, including real wood furniture, a large proportion of steel in its construction, authentic Russian markings and a mix of mock and real rivets in all the right places.

On the inside, the Double Bell AKM is equipped with a selection of internal upgrades to give it the edge over rivals in its price range, including a 6.05mm tightbore inner barrel, 8mm steel ball bearing bushings and a quick change spring system for easy power tuning with no need to open the gearbox. Whether you need a real wood and full metal AKM replica to complete your collection or to give the enemy team what for in a skirmish, the Double Bell BY-023 AKM AEG will see you well equipped in that unique Russian style!

If you are a lover of classic assault rifles, you will have noticed the absence of this Swiss beauty in AEG form, especially in full metal AEG form. An oft-forgotten platform, the S-55x series are a great alternative to the wealth of AR15s and AKs used by the vast majority of skirmishers. Take the JG S-551 to a Airsoft site and you will turn heads, then when you start shooting you will turn tails!

This Gas Blowback Airsoft Pistol is a compact member of the Hi-Capa family, constructed from Full Metal, with an Alloy Slide, Frame and Magazine. This makes it very tough and realistic, whilst still retaining the awesome performance of the Hi-Capa Platform. This variant of the Pistol features several Vents on the Slide, Wave Grooves and Full Auto/Semi functionality, making it the perfect Sniper Backup or something to keep handy... for close encounters.

If you like the iconic Dragunov SVD but you don't want a rifle a mile long, the SVD-S should suit your preferences! The CM.057S Dragunov SVD-S is constructed entirely from metal with a large proportion of steel parts and is a perfect replica of the SVD variant issued to Russian paratroopers and mechanised infantrymen, the SVD-S. The SVD-S has a shorter barrel and muzzle device than the original, and also has a pistol grip and folding stock at the rear instead of the SVD thumbhole stock. This is a Dragunov for the Airsoft marksman on the move!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 590mm inner barrel to make the SVD-S a great base platform for a DMR build. If you are after a long-range platform and want something with a folding stock for better portability, the SVD-S is the right tool for the job!

If you are planning a DMR build you have one more base gun to consider, thanks to ARCTURUS! The M4/AR-15 SPR Rifle boasts a lengthy 17.5-inch outer barrel and 15-inch M-LOK handguard, making it the perfect length for SPR/DMR duty. The M4/AR-15 SPR is remarkably light for a full metal rifle of its size and offers a wealth of accessory options with its M-LOK handguard and seamless handguard receiver rail integration, meaning if you want a huge optical sight you have plenty of room to mount it.

On the inside, the M4/AR-15 SPR is equipped with the same rock solid internals as ARCTURUS's other designs, with many parts which lend themselves to a DMR build already installed, including a 6.03mm tightbore inner barrel made from steel for extra rigidity. Whether you are keeping full auto for a proper SPR, or going for a high FPS DMR build and saying goodbye to the fun mode, the M4/AR-15 SPR is a great base gun for any long range oriented setup!

If you're looking for an affordable long-range AR with a unique modern look, the DA-A09 ALPHA™ from Delta Armory is one to watch. This M4/AR-15 AEG is based on real steel LVOA-style AR-15s, boasting a 16.2-inch outer barrel and handguard along with an equally long 6.03mm tightbore inner barrel, ideal for outdoor skirmishing or a DMR build. 

Inside the DA-A09, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's ALPHA™ line, including a 6.03mm tightbore inner barrel, CNC Type A trigger, rotary HOP-up unit and an upgraded piston, delayer chip and tappet plate from SHS.

The result of these premium parts is an AEG which shoots far better than one would expect for the price with full TM compatibility for the upgrade addicts. Whether you decide to wack a big scope on it and get to work or instead build it out into a fully-fledged DMR, the DA-A09 makes a fantastic outdoor skirmishing platform! 

If you're getting tired of the standard shaped M4/AR-15 platform the Zion Arms R15 should reignite your passion for the platform. This AEG is based on the real steel R&D Precision PW9 with its aggressive muzzle brake and dynamic looking M-LOK handguard but uses a unique 5.56-style receiver so you can use your existing M4/AR-15 AEG mags. The amazing build quality of this replica cannot be overstated; with a CNC machined 7075 T6 aluminium receiver and handguard, plenty of steel and gorgeous high density polymer furniture, the R15 weighs in at a mere 2.1kg despite its full metal construction.

While the externals are lightweight and speed-oriented, the internals take this theme to the next level. The inner barrel is a 6.03mm tightbore, meaning improved accuracy and consistency, the bushings are 8mm and equipped with ball bearings for friction-free performance and a smooth gearbox sound, and a high speed motor coupled with the advanced Zion Arms Nebula ETU/MOSFET provides its astonishing rate of fire and trigger response. The Nebula also allows you to program the trigger for burst mode, binary trigger and semi-auto only, giving the R15 what it needs to compete in the age of MOSFET-equipped AEGs!

If you're getting tired of the standard shaped M4/AR-15 platform the Zion Arms R15 should reignite your passion for the platform. This AEG is based on the real steel R&D Precision PW9 with its aggressive muzzle brake and dynamic looking M-LOK handguard but uses a unique 5.56-style receiver so you can use your existing M4/AR-15 AEG mags. The amazing build quality of this replica cannot be overstated; with a CNC machined 7075 T6 aluminium receiver and handguard, plenty of steel and gorgeous high density polymer furniture, the R15 weighs in at a mere 2.1kg despite its full metal construction.

While the externals are lightweight and speed-oriented, the internals take this theme to the next level. The inner barrel is a 6.03mm tightbore, meaning improved accuracy and consistency, the bushings are 8mm and equipped with ball bearings for friction-free performance and a smooth gearbox sound, and a high speed motor coupled with the advanced Zion Arms Nebula ETU/MOSFET provides its astonishing rate of fire and trigger response. The Nebula also allows you to program the trigger for burst mode, binary trigger and semi-auto only, giving the R15 what it needs to compete in the age of MOSFET-equipped AEGs!

If you have been planning to get yourself an AK and give it a full internal overhaul, why not save yourself the trouble? The SA-J02 EDGE™ from Specna Arms comes with a vast number of upgraded parts already installed, including an alloy HOP-up unit, flat HOP-up bucking, 6.03mm tightbore inner barrel and of course, the impressive Gate ASTER™ MOSFET.

Coupling these parts with the well regarded ORION™ reinforced version 3 gearbox leaves you with very little left to consider upgrading, and to top things off, the SA-J02 is constructed almost entirely from steel with well-finished real wood furniture, giving it the substantial feel in the hands that an AK should have. For a perfect replica AK-74 that shoots as good as it looks, you couldn't ask for better!

If you're working on an L119A2 build for your SAS/UKSF loadout, why bother? The Rossi L119A2 Neptune SAS 10.5" AEG with MOSFET is a fantastic replica of the real steel L119A2 boasting full metal construction, a programmable MOSFET/ETU system and pre-upgraded internals, all assembled and ready to rock with no compatibility worries and no technical headaches!

Externally, the Rossi L119A2 is a very close match for the real thing, with the only compromise being its non-monolithic receiver design. The real thing has a monolithic upper, but the only available Airsoft replicas have a four-figure price tag and come as a kit, requiring a lot of technical expertise and other parts to complete the build. 

With the Rossi L119A2, you are treated to some impressive stuff on the inside as a bonus. The version 2 gearbox shell is reinforced and equipped with 16:1 high-speed CNC steel gears, a ball bearing equipped quick change spring guide, a CNC aluminium nozzle, a polymer piston with a full steel tooth rack and a ball bearing piston head, resulting in top-notch reliability, improved rate of fire and easy spring changes for power tuning. The pre-installed MOSFET makes thing even sweeter, offering a wealth of programmable fire mode options, adjustable pre-cocking and trigger sensitivity with active braking to top it off. 

If you want the Obiwan Nairobi look for your next skirmish, the Rossi L119A2 Neptune SAS 10.5" AEG with MOSFET is the primary you need!

The QRF Series just got a whole lot sexier! This awesome addition to KWA's line up features a Pistol Calibre Carbine design with a gorgeous Straight 9mm Magazine, as well as well-crafted external parts and exception performance thanks to the love and attention that has been paid to the internals. Whether you want it for it's stunning looks, the quality that comes with the KWA name, or it's ability to perform with the best whether it's indoors CQB or outdoors woodland play, the KWA QRF MOD.3 AEG 2.5 won't let you down.

If you're in search of an M4/AR-15 AEG and want a more realistic feel and weight, the Sector ASTRA III Shadow M4 AEG is what you need. This full metal M4 platform is inspired by the most modern AR platforms in the real steel world, boasting a uniquely design receiver with waffle gripping texture, an M-LOK handguard and a compact low profile stock. It also features ambidextrous controls, making it perfect for all skirmishers!

Inside, we are equipped with a version 2 gearbox with 18:1 steel gears, a quick change spring system and the Ares EFCS MOSFET, providing programmable fire controls using an Ares EFCS programming box (not included) and low voltage cutoff to protect your battery. The EFCS also improves electrical efficiency and pairs perfectly with the pre-installed high torque motor to provide a snappy trigger response in semi-auto, ideal for pumping out the suppressive fire in CQB. If you want a solid short rifle that feels super realistic in the hands, the Secutor ASTRA III Shadow M4 AEG is a fantastic choice!

If you are into WW2 reenactment or a Japanese history buff, then S&T has just the thing for you! The S&T Type 38 Bolt-Action Airsoft Rifle Replica; Real Wood is a near-immaculate replica of the original Type 38 Rifle Carbine that the Japanese used during WW2. The Carbine variant was intended for use by cavalry, engineers and other roles where a full-sized rifle would be a hindrance. It is made from real wood giving it that authentic feel and weight.

S&T's Type 38 replica follows a similar format to the real steel rifle, boasting a beautiful antique finish on its metal components and stunning real wood furniture to make a rifle that belongs in a glass cabinet when it's not out on the skirmish field. If you need a wall hanger, or you're going for a unique look on the battlefield, there is no better way to stand out than with the S&T Type 38 Bolt-Action Airsoft Rifle Replica; Real Wood!

Disturbingly brilliant, this rifle takes the best of both worlds and combines them into one. Love it or hate it, the Trident 47 SPR-M from Krytac is truly a unique beauty; an AR-style platform which accepts AK-style magazines!

If you have been looking for a compact SMG with an impressive rate of fire, loaded with realistic features and fully licensed trademarks then you have found what you need! The Umarex MP7 A1 AEG features a full-sized AEG gearbox, making this compact AEG able to compete with the biggest and best! The inclusion of functional bolt hold-open/release, being sized to 1:1 scale with the real firearm, and the use of realistic materials throughout the build make the MP7 A1 AEG practically peerless.

Tappet plate and nozzle failures due to 11.1v use WILL NOT be covered by any warranty and repairs will be charged.

Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series are uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.

The AR-308S is the shortest in the AR-308 line and makes use of a compact 9.5-inch outer barrel with a 9-inch M-LOK handguard, and the unique Ares Pro stock pistol stabilising brace, offering 4 positions of adjustment. The external build quality of this AEG is absolutely exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what is more impressive; the high-quality feel of this AEG or its exceptional trigger response and rate of fire, which our fingers cannot outrun on a 7.4V LiPo!

Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series are uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.

The AR-308M is the mid-length offering in the AR-308 line and makes use of a 12.5-inch outer barrel with a 12-inch M-LOK handguard, and the unique Ares Pro stock, offering 5 positions of adjustment. The external build quality of this AEG is absolutely exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what is more impressive; the high-quality feel of this AEG or its exceptional trigger response and rate of fire, which our fingers cannot outrun on a 7.4V LiPo!

Finally released, the highly anticipated QRF Mod.1 is a pistol calibre style AR replica built by KWA to the highest of standards, with an excellent build quality, finish, and wide range of features to make this an absolute beast of an Airsoft Gun. This variant of the QRF features curved MP5 style magazines, and a curved stock. If you love the MP5 and the AR platform this Airsoft gun features the best parts from each platform.

The replica even comes with upgraded externals right out of the box, with a high quality PTS Syndicate removable flip-up iron sight pair and PTS polymer pistol grip.

This Airsoft AEG features a range of features designed to make it dominate in CQB environments, but is also performs great outdoors as well. With a short compact design the replica features a sliding PDW style stock allowing you to take corners more aggressively without the fear of snagging for tighter more consistent game play.

This replica is perfect for those Airsoft skirmishers who are looking for a pistol calibre AR, or for those who need a gun for tight CQB engagements.