Laylax

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

If you seek more accuracy or range from your AEG, the Prometheus HOP-up Tensioner for AEGs will help you achieve it! Supplied as a pack of two tensioners, you can choose between a "Bridge" style design with a central groove designed to reduce side-to-side deviation and thus, enhance accuracy, or a "Flat" style design intended to achieve maximum range. The contact surface provided by this HOP-up nub (another word for tensioner) is far larger than the standard, resulting in a stronger backspin effect and extended range with heavy-weight BBs.

The two tensioners included in the set are of different colours; one purple and one black. The purple tensioner is made from softer rubber, designed for sub-350 FPS builds and the black one is slightly harder, ideal for 350 FPS and above, making it the perfect tensioner for an AEG DMR. Compatibility-wise, these tensioners should fit almost any Airsoft AEG HOP-up unit but as always is the case with internal upgrades, we only recommend these for experienced techs and those who know their way around AEG internals. If accuracy and range is your objective, the Prometheus Bridge HOP-up Tensioner for AEGs belongs in your build!

If you have had a mishap when exploring your gearbox internals and the trigger spring has gone walkies, Laylax have your back with its Lightweight Trigger Spring Set. This set provides 2 trigger springs constructed from spring steel with a lighter pull than the original trigger spring, allowing for faster semi-auto spam. The springs are compatible with AEGs which use the Version 2 gearbox, including M4/AR15s, G3 and SMG-5 AEGs.

If you are after a bit more accuracy from your GBB pistol, a tightbore barrel is the easiest and most effective solution! Introducing the 6.03mm Tightbore Inner Barrel from Nine Ball, one of the best inner barrels you can treat yourself to. The Inner Barrel features standard inner barrel cuts, meaning the barrel is compatible with TM-based GBB pistols with the VSR style bucking (WE, Umarex G series etc.). Due to its length, we recommend this for GBB pistols, specifically HI-CAPA 5.1 and 4.3.

The inner barrel is constructed from stainless steel, with a highly polished internal surface for minimal friction and a deep and smooth crown to ensure your BB leaves the barrel smoothly and consistently. This barrel is cut for either VSR/GBB style HOP buckings.

If your AEG shoots hard you may want some hard internal parts to secure its performance in the long term! The Laylax Hard Anti-Reversal Latch for V2/V3 Gearbox is constructed from hardened steel to cope with even the most ferocious build. The set includes the anti-reversal latch itself and the ARL spring and is compatible with all Airsoft AEGs which use the Version 2 or Version 3 gearbox type.

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your AEG running for longer at high speed thanks to its reinforced polymer construction.

LAYLAX - PSS10 VSR10 Spring - is a spring designed by LAYLAX for VSR bolt action sniper rifles and other compatible platforms.

This is for you techies looking to get the maximum performance from your VSR or gas blowback Airsoft rifle. This Prometheus inner barrel is 370mm in length and 6.00mm in diameter, that's right - 6.00mm! Truly the tightest of bores!

Prometheus is a well known brand that has been in the Airsoft game for a long time and the quality has always stood at a consistently high level.

Constructed from stainless steel and, the small diameter reduces as much possible air loss and allows for maximum performance and a higher FPS to be reached, although check with your site's FPS limit before bringing your newly upgraded Airsoft rifle to skirmish. Due to the minimal diameter of this barrel, make sure to use high-quality BBs such as the G&G BB range, to avoid potential jamming of BBs.

If you're working on a high-speed AEG build, the Prometheus High Speed Motor with Hard Pinion Gear will give you the speed you need! This long shaft motor is compatible with M4/AR-15, SMG-5, G3 and P90 AEGs, offering an improved rate of fire, reliability and strength thanks to its pre-installed hardened steel pinion gear. 

The set includes the motor itself, the hardened steel pinion gear, a pinion spring and a polymer storage box so you can keep the motor clean and dust-free prior to installation. The motor spade connectors are also pre-wired in for easy installation, though the motor height will need adjustment manually once the motor is installed. 

Laylax/Prometheus is one of the most trusted names in the Airsoft industry when it comes to upgrade parts, with decades of experience and a great reputation with Airsoft techs. If a high-speed motor is on your shopping list, the Prometheus High Speed Motor with Hard Pinion Gear is a fantastic choice!

Can be fitted inside other rifles including AEG gearboxes. The sorbo pad works by absorbing impact from your piston head, please note you should expect an FPS loss so you may have to improve the air seal or fit a slightly larger spring to regain your desired FPS.

For those of you looking to customise your VSR, this should be on your list. Laylax bring us a new addition in their 'Precision Sniper System' range. Featuring machined steel construction this reliable trigger benefits from a low profile as a sniper you are likely tend to crawl and stay in the prone position with your cheek to the rifle for extended periods and a reduced safety profile is less likely to get caught accidentally.

With a sleek black design to complement your VSR or G-Spec, it also features a ridged texture on the catch for an increase of grip.

If you are looking to further extend your advantage and push your TM NGRS system to the limits reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is specifically designed for the Tokyo Marui Next Generation Recoil Shock (NGRS) gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

If you want to squeeze a bit more accuracy and FPS out of your AEG, Laylax has just the thing. This 6.03mm Tightbore Inner barrel is part of the Laylax Prometheus range, widely regarded as the best source for AEG upgrade parts in the world. Inner barrels from this same range are known for their rigid stainless steel construction and immaculate internal finish and are what we use in the phenomenal Bolster Armouries AEGs.

This 6.03mm tightbore is designed for AEG rifles, SMGs, and support guns which use the Tokyo Marui AEG style of barrel cut, which is the vast majority on the market, and will provide an accuracy improvement thanks to its finely polished internal surfaces and a slight increase in FPS thanks to the tighter bore improving air seal and the overall efficiency of the system.

If you are worried about trapping your wiring when inserting a magazine or reinstalling your MCX handguard, Laylax has once again come up with a solution! The Wire Guard for MCX AEG is designed to mount to the gearbox shell and keep your wires well out of the way of any snags or potential damage from inserting magazines or removing/reinstalling the handguard. If you want to get ahead of one of the known problem areas of the MCX and save yourself some hassle down the line this affordable upgrade could save you time and money!

If you have had a mishap and broken your selector plate, or you want something a bit stronger to reduce the likelihood of failure and reduce resistance at the same time the Laylax Hard Selector Plate is what you need. This selector plate is compatible with M4/AR15 AEGs and is constructed from hardened polymer to reduce flex and improve strength. This is a conventional selector plate designed for standard trigger contacts and will not work with optical MOSFETs without modification.

For the Airsofter who wants ultimate range and accuracy from their AEG. This high performance bucking by Prometheus is designed for Marui AEGs and is smooth inside, making it suitable for those with a Flat or R-Hop modification.

If you are building an Airsoft DMR this enhanced HOP-up rubber set from Laylax Prometheus should be on your shopping list! Laylax Prometheus has a fantastic reputation for enhanced HOP-up buckings, providing the Purple bucking used in the Bolster Armouries ONYX AEG series thanks to Prommy's wealth of experience and pedigree. We love them, and we think you will too!

This bucking is designed for builds shooting at 350-400 FPS, putting it right in the sweet spot for DMRs. When installed, this set should improve range, enhance air seal and allow for heavier weights of ammo to be used. Compatibility-wise, this should fit the vast majority of Airsoft AEGs which use the standard TM AEG style HOP-up bucking/rubber and nub, which is almost all of them!

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your Tokyo Marui NGRS AEG running for longer at high speed thanks to its reinforced polymer construction.

If you are looking for exceptional performance for your AEG, either for a high rate of fire build or a DMR running at higher than normal FPS reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is compatible with any AEG with a version 2 or version 3 gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

If you feel the need for speed, the EG Hard Gear Set 13:1 Ratio for Version 2/3 Gearbox from Laylax will give you just that! The renowned Laylax/Prometheus EG Hard Gear series boasts over a decade of service, crafted with precision through Japanese machining, heat treatment, and forging techniques that adhere to the highest standards. This meticulous manufacturing ensures a notably quieter gear mesh sound, even under higher FPS and fire rate conditions.

These are 13:1 high-speed gears, improving rate of fire and trigger response by cycling the gearbox once every 13 motor revolutions as opposed to the standard once per 18 revolutions. This means you can boost rate of fire without upgrading your motor, though like any other replacement gearsets, these will require expertise to install. If you already upgraded your motor, wiring and added a MOSFET and you still want more speed, this gearset will do the trick.