Specna Arms SA-F03 FLEX™ Gen.2 M4/AR-15 Compact AEG; X-ASR MOSFET

The Specna Arms SA-F03 is from Specna's FLEX™ line, designed to outdo their renowned CORE™ line in the lightweight, low-cost AEG game. This is the updated "Gen.2 X-ASR MOSFET" version, equipped with the Gate X-ASR Smart Fuse MOSFET, providing diagnostics while enhancing trigger response. Whether this will be your first foray into Airsoft or you need an affordable loaner AEG, the SA-F03 is a fantastic option with more than its fair share of perks!

The "Gen.2" part of this rifle's title means we are treated to the advanced AETHER™ gearbox shell and Magnus TDC HOP-up unit of Specna's PRIME™ series, providing enhanced long-range performance and making gearbox tuning a piece of cake. Also inside is the Helium™ Flat Hop and quick-change spring feature, overall making this rifle incredibly stacked for its price.

Starting at the tip of the 10-inch outer barrel, we can find a birdcage flash hider pre-installed, the classic M4/AR-15 muzzle device. The flash hider looks great and suits the build well, but can be replaced with any other 14mm CCW threaded muzzle device if you prefer a different style, including tracer units and suppressors.

The handguard is equipped with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions, punctuated with additional M-LOK slots at the offset angles, giving you plenty of space to mount M-LOK accessories. M-LOK is one of the latest accessory interfaces to hit the market, both for real steel and Airsoft, allowing you to fit M-LOK vertical or angled grips directly, or mount 20mm Picatinny rail adapters for M-LOK to make use of 20mm Picatinny grips, flashlights and laser units.

With a 20mm Picatinny rail at the 12 o'clock position, the handguard also provides a mounting point for the included flip-up aperture iron sights, which can either be left flipped down or removed entirely if you prefer to use a red dot sight or scope. The irons can be raised and lowered by pressing the textured button at the rear and are fully adjustable for both windage and elevation.

As we arrive at the receiver, we see a familiar sight: M4/AR15 controls, with a well-placed fire selector sitting beneath a right-handed shooter's thumb, a dummy bolt catch in the centre of the receiver on the left side, and the magazine release, which is located on the magazine well on the right side of the AEG. While the controls on the SA-F03 are set up for right-handed users, they can also be operated by a left-handed user without issue after a bit of practice.

The fire selector provides 3 modes of fire: SAFE, SEMI and AUTO, which are denoted by recessed text surrounding the fire selector lever. Each fire mode has a 90-degree throw between, making it super easy to switch from SAFE to SEMI as you bring the AEG up and align the sights. The magazine release is on the right side of the magazine well,  protected by a moulded-in "fence" which protects the release from inadvertently being pushed as your rifle brushes against your kit. This is a push-through mag release, which is easily operated using the trigger finger, one of the enviable handling characteristics the AR-15 platform is known for.

The charging handle can be found at the top rear of the receiver and features an extended latch which protrudes on the left side for fast access and one-handed operation. When the charging handle is pulled, the dust cover on the right side will open, and the mock bolt carrier will retract, revealing the rotary HOP-up unit within. This device allows the user to adjust the amount of backspin applied to the BB and tune it to provide optimum range and a stable flight path with various weights of BBs. For the SA-F02, we recommend 0.25g for the best combination of projectile speed, wind resistance, and range.

The pistol grip provided on the SA-F03 is an "A2" finger ridged type, with diamond checkering on either side and linear grooves on the rear to provide a positive grip. The A2 grip finds its way onto many M4/AR15 AEGs, primarily due to its classic looks and its suitability for a variety of hand types. This grip has a nice, large motor adjustment screw, which is great to see, as more affordable replicas often use a small grub screw for this role, which we have often found to be inadequate.

The SA-F03 also uses the M4/AR15 modular trigger guard system, allowing the trigger guard to be changed out for an enlarged one, as long as the replacement guard is of AEG spec. The pre-installed trigger guard is a standard M4A1 flat type, made from polymer to keep the build lightweight.

Moving to the rear, we can find a 6-position M4/AR15 buffer tube, constructed from the same high-density polymer as the receiver. This keeps the build light and prevents your buffer tube from becoming worn from constant stock adjustments, which often removes the finish on metal buffer tubes and makes them look tatty. The crane battery stock runs on this buffer tube and can be adjusted to any of the 6 positions by holding down the textured adjustment lever on the bottom of the stock and adjusting it to the desired length. On either side of the stock, we can find QD sling sockets, which, when coupled with a QD sling stud, can provide a flexible sling setup with quick-release functionality.

The battery compartment of the SA-F03 is within its crane stock, and can house up to a 7.4V 1300 mAh LiPo battery in nunchuck/crane configuration. The battery compartment can be accessed through the butt plate of the stock. This can be achieved by pushing the two protruding tabs at the toe of the stock together, and then through the stock to the rear, after which the butt plate can be pulled downwards and removed. With the butt plate removed, you can remove the battery compartment plug and insert your battery into the "cheeks" of the stock, connecting up the mini-Tamiya connector found inside the buffer tube to your battery.

Inside the Gen.2 SA-F03, we are treated to the Aether-enhanced gearbox shell, the same reinforced V2 shell used in Specna's top-tier PRIME series. The Aether features a reinforced spine and ports throughout the design to allow for easy tuning, ideal for the techy types. Also inside are 18:1 ratio steel gears running on 8mm bushings. The spring guide is an ESA quick-change example, making power tuning a breeze for those who want to get as close to site limits as possible. The inner barrel is a 6.03mm tightbore paired with the Magnus TDC rotary HOP-up unit, giving you superb accuracy potential and the most up-to-date HOP-up unit style for M4/AR-15 AEGs. All internal parts are Tokyo Marui AEG spec, meaning aftermarket upgrades are a go for the performance seekers!

This revamped SA-F03 is also equipped with the Gate X-ASR MOSFET, a "Smart Fuse" type device designed to provide diagnostics and warn the user of certain errors. The X-ASR also enhances electrical efficiency and is pre-wired to a Deans battery connector, offering lower resistance than the mini-Tamiya connector, which results in a snappier trigger feel and a slight boost in rate of fire. The inner barrel is also a 6.03mm tightbore paired with a rotary HOP-up unit, promising above-average accuracy and range using high-quality BBs, as long as you do your part!

Features

• High-density polymer build - Alloy outer barrel, steel trim parts
• 6.03mm Tightbore inner barrel - Great accuracy potential
• 14mm CCW male threaded outer barrel - Tracer/suppressor ready
• QD sling sockets on board - On each side of the stock
• M-LOK Handguard - M-LOK slots at 3, 6, & 9 o'clock, ready for M-LOK accessories
• 3x 20mm Picatinny rails for M-LOK pre-installed - Use 20mm Picatinny accessories
• Extended charging handle - Easier HOP-up access for gloved shooters
• "A2" Finger ridged pistol grip - Comfortable for a wide variety of hand sizes
• M4/AR-15 Flat trigger guard - Interchangeable with aftermarket M4 AEG trigger guards
• 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type and loadout
• Crane battery stock - Plenty of battery space, rubber butt plate & QD sockets on each side
• Rear wired: Deans connector - Recommended battery: 7.4V 1300 mAh LiPo battery
• Version 2 Gearbox:
  • Aether Enhanced gearbox shell
  • Aether Aluminium nozzle
  • Polymer piston with steel tooth rack
  • 8mm Bushings
  • ESA quick-change spring system
  • Steel 18:1 ratio gearset
• GATE X-ASR MOSFET - Protects your platform's internals and batteries
• Compatible with M4/AR-15 AEG magazines - Plenty of spares available

Package Includes

• Specna Arms SA-F03 FLEX™ Gen.2 M4/AR-15 Compact AEG; X-ASR MOSFET
• 300rnd Hi-Capacity Magazine