Viewing 30 of 67.
grid
list
23.49
  • Mesh helmet cover with velcro
  • Available in MC, Dark Earth & Black
  • For EXFIL Style helmets

If you're running an EXF helmet from EmersonGear or FMA, this helmet cover is the key to styling up your lid. The cover is constructed from mesh fabric, available in Multicam, Dark Earth and Black, complete with velcro so you can customise it with I.D or Morale patches

If you went for a black helmet and you find it stands out in the woods, grab a Multicam cover to help you blend in! Likewise, if you're rocking a tan or foliage green helmet and you want a more tactical look for CQB, slap a Black cover on that bad boy to change things up! 

23.49
  • Mesh helmet cover with velcro
  • Available in MC, Dark Earth & Black
  • For EXFIL Style helmets

If you're running an EXF helmet from EmersonGear or FMA, this helmet cover is the key to styling up your lid. The cover is constructed from mesh fabric, available in Multicam, Dark Earth and Black, complete with velcro so you can customise it with I.D or Morale patches

If you went for a black helmet and you find it stands out in the woods, grab a Multicam cover to help you blend in! Likewise, if you're rocking a tan or foliage green helmet and you want a more tactical look for CQB, slap a Black cover on that bad boy to change things up! 

23.49
  • Mesh helmet cover with velcro
  • Available in MC, Dark Earth & Black
  • For EXFIL Style helmets

If you're running an EXF helmet from EmersonGear or FMA, this helmet cover is the key to styling up your lid. The cover is constructed from mesh fabric, available in Multicam, Dark Earth and Black, complete with velcro so you can customise it with I.D or Morale patches

If you went for a black helmet and you find it stands out in the woods, grab a Multicam cover to help you blend in! Likewise, if you're rocking a tan or foliage green helmet and you want a more tactical look for CQB, slap a Black cover on that bad boy to change things up! 

5.99
  • Harder to Lose
  • Secure Goggles
  • For 36mm Headbands

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

5.99
  • Harder to Lose
  • Secure Goggles
  • For 36mm Headbands

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

8.49
  • Lightweight
  • Easy To Install
  • BUMP/FAST/MICH

A lightweight Polymer mount for FAST, BUMP and MICH Airsoft helmets that have a front mount, allowing you to attach GOPRO cameras to record your gameplay. 

9.34
Was 10.99
Save 1.65
  • High density polymer construction
  • Picatinny helmet rails included
  • For EX Ballistic style helmets

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

9.34
Was 10.99
Save 1.65
  • High density polymer construction
  • Picatinny helmet rails included
  • For EX Ballistic style helmets

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

10.99
  • Velcro Sticky Back
  • Mix & Match Comfort
  • Square & Rectangular Pads

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

10.99
  • Helmet cover for FAST Maritime 
  • Features Elastic Loops for foliage
  • Helmet NOT included

Is your replica FAST helmet too shiny, like a bald mans head? Don't fancy painting it? The FMA maritime helmet cover solves this issue whilst providing excellent function with its camo fabric and extra loops for foliage if you want to truly disappear in the woods. 

10.99
  • High density polymer construction
  • Picatinny helmet rails included
  • For EX Ballistic style helmets

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

10.99
  • High density rubber construction
  • Attaches to FAST helmet ARC rails
  • Avoid those painful ear shots!

If you have a FAST helmet but don't run comms, we are sure you have taken a few painful shots through those massive openings around the ears. It sucks, we agree, but the solution is here! The FMA Protective Side Covers are constructed from high-density rubber and attach to the ARC rails on FAST helmets, protecting your ears whilst remaining flexible enough not to inhibit your head movement. The covers come as a set of two, just like your ears, and are the key to surviving CQB without taking painful ear shots.

These covers are sized to fit FAST helmet ARC rails and are unlikely to fit other helmets without modification.

11.99
  • Velcro Sticky Back
  • Mix & Match Comfort
  • Square & Rectangular Pads

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

22.49
  • Padded Insides
  • Protects from BBs
  • Extremely Lightweight

A lightweight Airsoft replica helmet constructed from Polymer, designed to replicate the US Army's MICH 2000 helmet. 

22.49
  • Loops For Camo
  • MICH 2000 Cover
  • Durable Nylon Material

A fabric helmet cover, designed to be used to cover MICH 2000 helmets and change their appearance as quickly and as easily as possible.

22.94
Was 26.99
Save 4.05
  • 20mm Rail Pieces
  • Attaches to Helmets
  • Make Helmet Your Own

A Polymer constructed set of adaptors for railed helmets, allowing you to install 20mm accessories to your helmet setup.

23.49
  • Attach Headset
  • For Flux Helmet
  • Comfortable Comms

A set of Adapters to attach your EARMOR Active Ear Protection Headsets to an M-TEK Flux Helmet Rail. If you own a pair of EARMOR Active Ear Defenders (such as the M32) and a M-TEK Flux Helmet, then this is the most efficient and comfortable way to combine the two. This method of mounting removes the needs for the large and cumbersome headband, making them far more pleasant to wear for a long skirmish.

23.49
  • Accessory / counterweight pouch
  • Attaches to helmet Velcro
  • Ideal for a power bank for an action camera

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

23.49
  • Accessory / counterweight pouch
  • Attaches to helmet Velcro
  • Ideal for a power bank for an action camera

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

23.49
  • Accessory / counterweight pouch
  • Attaches to helmet Velcro
  • Ideal for a power bank for an action camera

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

23.49
  • Accessory / counterweight pouch
  • Attaches to helmet Velcro
  • Ideal for a power bank for an action camera

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

23.49
  • Accessory / counterweight pouch
  • Attaches to helmet Velcro
  • Ideal for a power bank for an action camera

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

25.99
  • NVG Mount
  • Shock Resistant
  • 20mm RIS Inserts

A Polymer constructed Helmet which is shock-resistant and durable. It has an adjustable chin strap and comes included with adhesive internal padding to make it more comfortable/fit better at your control. The front of the Helmet features a slot for NVG/Wilcox Mounts, and the side rails come included with 20mm inserts for you to install compatible accessories to the sides of the helmet.

29.49
  • NVG Mount
  • ARC Side Rails
  • Lightweight & Tough

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

29.49
  • NVG Mount
  • ARC Side Rails
  • Lightweight & Tough

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

29.49
  • For NVG Counter Weight/ Power bank
  • Attaches using Velcro and Bungie cord
  • Complete your "Operator" lid!

If you are in the middle of a helmet build and it looks a little bare, consider the Accessory Pouch Gen.2 by FMA. This pouch is modelled after pouches used for NVG counter weights and battery packs, but can be put to whatever use you need on the skirmish field.

29.49
  • FAST Ballistic replica
  • ARC Rail & NVG Mount equipped
  • Perfect for UKSF, CTSFO & Pathfinder loadouts

If you prefer hearing a loud "thwack" when you take a headshot over feeling pain, the FMA FAST Ballistic Helmet Replica will suit your preferences! This helmet is a detailed reproduction of the ever-popular FAST helmet design in its Ballistic cut, though it is only for looks and won't protect you from real rounds, only Airsoft BBs! 

The FAST Ballistic Helmet Replica comes kitted out with ARC accessory rails and an NVG mount straight out of the box so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly. Whether you are working on an SAS/UKSF loadout or you simply need a stylish way to protect your cranium, a FAST helmet is a great call!

30.49
  • NVG Mount
  • FAST Style Rails
  • Protective Ear Wings

A lightweight 'brain-bucket' made using tough Polymers, which is a beautiful hybrid between the MICH helmet we all know and love and the useful rail space of the FAST helmets.

31.99
  • Adjustable
  • Mount Included
  • Complete Shroud

The Low Profile NVG Mounting System is a complete replacement shroud for Airsoft Helmets, which also comes with a Mount Assembly attached, ready to connect to a wide range of Night Vision Systems. It is constructed from a fairly tough Polymer, however we recommend tethering the Shroud to your Helmet. This advice is even given to users of real Mounts/NVGs, so it's just common sense when operating with an Airsoft replica.

35.49
  • NVG Mount Point
  • Hard Polymer Shell
  • Left / Right Side Rails

A replica FAST helmet, designed to act and function just like the real thing. The helmet features a front NVG mount, allowing you to attach mock NVG and camera.

About Our Airsoft Helmets & Helmet Accessories

Don’t get caught out without the right headgear. Between a 400 FPS bullet to the forehead, to an unfortunate outside skirmish fall, the only thing worse than getting knocked out the game is having the bruise to prove it. 

Our Airsoft helmets keep you safe on the battlefield - not something to be overlooked or taken lightly - with helmet accessories to boost your game such as lighting systems. 

For added realism, shop our FAST helmets - specially designed combat helmets used by the armed forces. We stock a range of popular brands, including EmersonGear and more. 

Designed to do more than just protect - some of our expertly designed Airsoft helmets even break up your silhouette, making you harder to detect. 

Pair an Airsoft helmet with our glasses and goggles or skull balaclavas so you’re totally battle ready. If you’re still waiting for your Airsoft Defence, then check out our two-tone Airsoft guns, with everything from two-tone assault rifles to two-tone snipers and more.

Shop our Airsoft helmets and headgear online today or check out our Huddersfield store, equipped with its own dedicated range!