Airsoft Guns Under £200

A Gas Blowback Airsoft 6mm BB Pistol, which has been designed and created based off the CZ P-09 Duty and fully licensed by CZ from Czech Republic. The Pistol externally is constructed almost entirely from Polymer, with a Polymer Slide and Frame, but features Alloy Sights and Internals.

If you need to bring some serious firepower to your next skirmish there are few platforms that can rival a 6-shot revolver grenade launcher! The NUPROL Matrix MGL can carry up to 6 40mm MOSCART grenade shells and unleash their payloads in under a second thanks to its revolver-like design, based on the real steel Milkor M32 MGL.

The Matrix is similar to other revolver grenade launchers we have seen in the past but with a few notable improvements. The outer barrel of the Matrix is constructed from aluminium and has a threaded tip, meaning more realistic handling, though we don't think there are any suppressors for this monstrously large thread!

The pistol grip of the original MGL has been replaced with a VFC QRS pistol grip, boasting enhanced ergonomics and crackle texture on each side for improved grip. The stock still mounts to the good old M4/AR-15 buffer tube, but the pre-installed stock on the Matrix is the VFC QRS stock, offering a snag-reducing A-frame style design with QD sling sockets on either side.

Whether you have vehicles to deal with in an upcoming Milsim skirmish or you simply want to be the badest bunker buster on the field, the NUPROL Matrix MGL will equip you to clear the enemy out of any emplacement like a bad fart clears a room!

An Airsoft Electric Pistol which has an upgraded Gearbox with a pre-installed MOSFET, meaning you get a high rate of fire in a pistol which works perfectly in any weather conditions!

An Airsoft Electric Pistol which has an upgraded Gearbox with a pre-installed MOSFET, meaning you get a high rate of fire in a pistol which works perfectly in any weather conditions!

If you like your AKs lightweight and modern, the S&T AK-74MN Sports Line AEG should suit your needs. Based on the real steel AK-74MN, the most recent variant of the AK-74, this AEG is constructed primarily from high density polymer with steel and alloy parts to add strength where needed.

Equipped internally with a 6.02mm tightbore inner barrel, alloy slider HOP-up unit, version 3 gearbox with a quick change spring guide and 8mm slide bearing bushings, S&T has treated us to a respectable internal feature set for such an affordable AK. The externals are built using the VFC style, meaning realistic disassembly and compatibility with aftermarket external upgrades for VFC AKs. If you need a featherweight AK replica to maintain your speedy playstyle, the S&T AK-74MN is one to watch!

This lightweight and incredibly effective Airsoft Electric Gun is powered by a Battery in the Stock, and features Double Eagle's Fire Control System, which allows for programmable Trigger Modes (including Binary Fire), as well as giving you excellent Trigger Response. The package is completed by a Quick Change Spring System, making it suitable for just about any field! If you want to be light on your feet and as effective as all the 'modded/custom guns' without having to break the bank, the Double Eagle M904 Falcon Fire Control Series are the perfect choice.

The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the Airsoft GLOCK 19 gen4. If you're a firearm fanatic who's mad about getting as close to the real deal as possible, you've come to the right place.

Custom external components come together to create one unique looking M4. Constructed from tough, but lightweight polymer, the M4 is a solid platform, supported by many systems and featuring a highly customisable top rail, which in total is 21'' in length, there are a huge array of options to customise this AEG.

With this rifle being on the longer side, it's a perfect entry level custom M4 for skirmishing outdoors and taking out longer range targets.

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

A spring-powered Airsoft Sniper Rifle which is based on the highly successful and widely compatible VSR-10 model. Coming out of the box at 440 FPS w/ 0.2g BBs with a smooth cycling bolt and Real Wood furniture, this is the ideal Sniper Rifle for someone who wants maximum realism and minimal setup / fuss.

RAVEN are back! This time with a series of beautiful Hi-Capas which offer an impressively strong recoil and cold-weather performance all in one. Coming included with a set of low-light ironsights and a 20mm Pistol Rail, this is a strong contender for king of the Hi-Capa platform.

RAVEN are back! This time with a series of beautiful Hi-Capas which offer an impressively strong recoil and cold-weather performance all in one. Coming included with a set of low-light ironsights and a 20mm Pistol Rail, this is a strong contender for king of the Hi-Capa platform.

If you are looking for a secondary weapon with a bit more "oomph" than a pistol, the M56B has your name on it! This pistol grip equipped breaching shotgun fires 3 BBs per trigger pull, giving you a realistic shotgun-like spread pattern to ensure you can hit those fast-moving targets in CQB. This shotgun is constructed with an alloy outer barrel and mock magazine tube, and a polymer receiver with a rubberised pump and pistol grip. The short overall length of this shotgun makes it perfect to be carried in a back scabbard and whipped out when there are rooms to be cleared.

If you're looking for an affordable beginner Airsoft gun with a unique look, the CYMA CM.508 M4A1 S-System AEG should be right up your street! This M4 AEG is battery-powered and constructed predominantly from ABS polymer with an alloy version 2 gearbox based on the Tokyo Marui design. This keeps the build light and easy to move with, ideal for younger skirmishers or those looking for something lighter than a full metal primary for late in the skirmish day. 

The alloy version 2 gearbox the CM.508 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

On the outside, the CM.508 is ready for 20mm Picatinny accessories such as red dot sights, scopes, tactical flashlights, lasers and vertical grips, ready to be customised for the mission at hand. The barrel is threaded to 14mm CCW male, meaning suppressors and tracer units can be added for sneaky styling and an instinct-aiming advantage. If you want to try your hand at Airsoft skirmishing or target shooting without breaking the bank, the CM.508 M4A1 S-System AEG from CYMA is the most affordable way to do it!

The CYMA CM.121S is a replica of the fearsome Desert Eagle in Airsoft Electric Pistol form with a twist. This AEP is built around a MOSFET which leaves you with a savage Rate of Fire and much higher performance than a normal AEP.

The CYMA CM.121S is a replica of the fearsome Desert Eagle in Airsoft Electric Pistol form with a twist. This AEP is built around a MOSFET which leaves you with a savage Rate of Fire and much higher performance than a normal AEP.

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

A Pump Action, Spring Powered Tri-Burst Airsoft Shotgun, which accepts an Airsoft Shotgun Shell inside the breech, and will fire three BBs which each Trigger pull. This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail, as well as a Shell Holder, Speedloader and Shotgun Shell.

A Full Metal Airsoft Shotgun which is Tri-Burst and Spring Powered, meaning it will throw 3 x BBs down range towards your target with each pump of the Shotgun (and pull of the trigger). This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail.

Get into Airsoft skirmishing with a modern tactical variant of the world renowned and iconic AK47.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

The CM.028A comes with some tactical upgrades such as 20mm RIS/RAS railed handguard and threaded barrel to attach your favourite accessories.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box..

A 6mm Airsoft Gas Blowback Pistol, based on the B9 handgun, given a modern and Secret Agent inspired make-over. This Airsoft Replica Pistol features a realistic Blowback action that simulates recoil, and is the perfect companion to any Airsofter who wants to be more effective in CQB situations.

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

If you're into revolvers and seeking an affordable way to fill your holster, the HFC HG-132B Python 4" NBB Gas Revolver is ideal. This green gas-powered non-blowback revolver is inspired by the real steel Colt Python and works just like the real thing, with a rotating cylinder, removable shells and a functional double action/single action trigger. This is the chrome-finished model, denoted with a "C" suffix and rocking a mirror-shiny chrome finish which makes it stand out next to boring black pistols.

Being a revolver, the HG-132C will be a challenge to use in-game, and its lack of a HOP-up and relatively low FPS mean it is definitely more suitable for CQB than taking out targets at long range. Being constructed primarily from high-density polymer with an alloy outer barrel makes the HG-132C nice and light, leaning into its role as a last-ditch skirmish backup. If you have revolver fever and love a platform with style but don't want to shell out (tehee) too much, the HFC HG-132C Python 4" NBB Gas Revolver is the wheelgun for you!

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

The Double Eagle M904R is a lightweight but extremely effective Airsoft Electric Gun, powered by a Battery in the Stock. It is based around the 'Falcon Fire Control System' which offers a highly programmable and incredibly well-responding Trigger. If you're a fan of staying light on your feet, flanking the enemy and generally causing mayhem, this Airsoft Gun will do you proud on the skirmish field.