Delta Armory Airsoft

If you're looking for a plate carrier with maximum coverage, the Delta Armory Direct Action Plate Carrier Vest is exactly that! This plate carrier is made from 600D Oxford Polyester fabric with polymer buckles and steel snap buttons, designed similarly to old-school soft armour & plate combo carriers like the RAV and CIRAS, offering superb coverage, ideal for CQB. 

The Direct Action Plate Carrier has pockets at the front and rear for SAPI style plates along with smaller side plate pockets inside the cummerbund, giving you all-around protection if you choose to run the DA Plate Carrier with mock plates (available separately). If you choose to skip the plates, you'll find the DA Plate Carrier to provide plenty of protection on its own thanks to its internal padding, with the option to remove the cummerbund for more agility in outdoor environments. 

As we might expect, the Direct Action Plate Carrier is equipped with MOLLE webbing loops on the front, rear and sides, allowing MOLLE pouches to be mounted wherever needed to complete the mission at hand. Velcro panels are also present on the front and rear, letting you customise your rig with Morale and I.D patches, either to make your fellow skirmishers smile or make your carrier look more professional. 

Sizing-wise, the DA Plate Carrier should fit most body types, offering a wide range of adjustment via the elasticated cummerbund and velcro-equipped shoulder straps. If you aren't a fan of modern low-profile carriers and prefer more coverage and load-bearing capacity, the Delta Armory Direct Action Plate Carrier Vest is ideal!

If you're in search of a close-quarters-optimised M4/AR-15 AEG on a budget, you've found one of the best options with the DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG from Delta Armory! A lightning-fast density polymer build with an alloy outer barrel and steel sling plate, the DA-C14-EGL is also rocking the EAGLE™ programmable MOSFET inside, giving it advanced functionality way beyond its price point!

Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the DA-C14-EGL far more long-range effect on target than one might expect for such a compact primary!

If you like to move fast and need a platform to match or you're a CQB specialist needing to cut tight corners, you're in great hands with the Delta Armory DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG at your side. Packed with pre-upgraded parts and based on Tokyo Marui's proven internal design, the DA-C14-EGL is affordable, reliable and ready when you are!

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

If you are rocking an M24 or M40A5 sniper rifle from Delta Armory then you should check this out! This magazine is designed for these platforms; it is constructed from high-density polymer and holds 28 BBs. This may not sound like a lot, but remember that's racking the bolt 28 times, tiring!

Sniping is already difficult; that's why it's important to ensure you have plenty of spare mags so you don't have to give up your sneaky position. Get a couple of these magazines and you'll be ready to skirmish all day!

If you're working on a high-speed or high FPS build, the Delta Armory Version 2 CNC 8mm QSC Gearbox Shell will save you a lot of heartache in the long run! This ultra-strong version 2 gearbox shell is CNC machined from the best aluminium around, known as 7075 T651. This means if you're running a super strong spring or going for a dual-sector gear build, this gearbox shell has what it takes to keep running in the long term, being considerably stronger than standard alloy gearbox shells.

The QSC Gearbox shell also features radiused cylinder window corners to better distribute force and is pre-cut for Gate TITAN/ASTER, Perun Hybrid or Delta Armory ETU MOSFET systems, meaning no need to get the Dremel out to add advanced functionality. The bearing ports are 8mm in diameter, making this the perfect host for Bolster Armouries EZO Ball Bearing Bushings. If you're reaching for the stars when it comes to performance and want your build to last more than a few bursts, the Delta Armory Version 2 CNC 8mm QSC Gearbox Shell is what you need!

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

If you're running a Delta Armory DA-P series EU17 GBB pistol and want to reload faster, this is the key! The Delta Armory Extended Magazine Catch for P-Series GBB is constructed from high density polymer, designed specifically for the DA-P series but potentially compatible with other Gen.3 style EU17 frames (no guarantees though!).

This extended magazine release features a textured surface for optimal grip in all weather and is much wider than the standard mag release, making it easier to reach for smaller hands. The set includes the entire mag release assembly other than the spring, though the original mag release spring used in the DA-P series is a perfect fit. A super affordable upgrade to make pistol handling much easier, this Extended Magazine Catch is just what you need to speed up your reloads!