- 7.4V Mini PEQ Battery
- 20C Discharge rate
- 850mAh Capacity
If you run a front-wired AEG with limited battery space, storing your battery in a PEQ-15 battery box could be the solution! This 7.4V 850mAh 20C LiPo battery from Electro River is designed to fit into cramped spaces and is the perfect size for use in a PEQ-15 battery box. The battery measures 5.5 x 3 x 1.5cm approximately, and the wire length between the cell group and connector is approximately 11cm.
The compact size of this battery makes it great for both Airsoft and any other electronics projects you have on the go, providing plenty of juice in a smaller form factor. The continuous discharge rate of this battery is 20C, and its peak is 60C, giving you a nice snappy response without overdoing things!
- 1450mAh
- 30c Rating
- 7.4v 2S LiPo
A LiPo stock tube battery designed to fit in buffer tubes and small spaces which other large batteries do not fit.
- 7.4v 2S
- 1200mAh
- 20C Rating
A ultra thin and lightweight battery, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c, giving it a 20w output.
- 11.1V 1000 mAh Battery
- LiPo Balance charger
- Perfect 11.1V battery starter kit
Need a battery and a charger for your upgraded AEG? Get both at once with the Specna Arms Set EASY Charger With an 11.1v 1000mAh Battery! This package has everything you need to get started with 11.1V batteries. The balance charger ensures that all your battery's cells are charged equally, it also works for 7.4V batteries.
11.1V batteries should only be used with upgraded platforms, the high voltage and discharge rate can cause excess wear on internal parts inside stock AEGs. However, if your Airsoft rifle is built to take 11.1V batteries you will notice an improved rate of fire, snappier trigger response and possibly even an increase in FPS.
- Deans Connector
- Crane Stock Layout
- 11.1v 1450mAh 30C
A Lithium Polymer battery for Airsoft, RC Cars and many other hobbies which comes as a Crane Stock configuration with a Deans connector. This battery is perfect for rear wired Crane Stocks and front wired handguards, and especially AEGs that require an 11.1v battery.
- 7.4v Rating
- 600mAh Capacity
- 20/40C Discharge
A 7.4v LiPo Battery for Airsoft Electric Guns, specifically the Specna Arms PDW range and other replicas with a tight/compact Battery Compartment. The Battery has a capacity of 600mAh, and a discharge rate of 20/40C. The compact size of the Battery makes it ideal for PDW Stocks, Pistol Grips, PEQ Boxes and other tight battery spaces.
- 1100mAh
- 20c Rating
- 7.4v 2S LiPo
A stick 7.4v 1100mAh LiPo designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries, intended to allow Airsofters to get the best possible performance from their Airsoft Electric Guns.
- 7.4v Rating
- 600mAh Capacity
- Compact PDW Battery
A 7.4v rated LiPo Battery for Airsoft Electric Guns, specifically ones that need a compact battery for a small space, such as PDW Stocks and Pistol Grips. The Battery has a 600mAh Capacity and a 20/40C Discharge Rate, as well as having a Mini Tamiya Connector to make it compatible with a huge range of Airsoft Guns. If you need a compact 7.4v LiPo for a Specna Arms PDW or other Airsoft Gun with a tight battery space, then this is the ideal choice.
- 7.4V 2S Stick battery
- 15C Discharge rate
- 2000mAh Capacity
If you want the biggest stick battery you can squeeze into your M4/AR-15 buffer tube, this is probably it! The Specna Arms 7.4v 2000mAh 15/30c LiPo Stick Battery is pre-wired to a mini-Tamiya battery connector and designed for slim and long battery compartments. The battery is a 7.4V LiPo with a capacity of 2000mAh, continuous discharge rate of 15C and maximum discharge rate of 30C.
The battery measures 12.3 x 1.6 x 1.8cm approximately and should fit into most M4/AR-15 buffer tubes, though some with less space inside may require that you leave the stock in an extended position. The wire between the cell group and connector is approximately 10cm, giving you plenty of flexibility to fit the battery where you need it. As always, measure up before you buy!
- 1300mAh
- 20C Rating
- 11.1v 3S LiPo
A LiPo battery for Airsoft Electric Guns which has been designed to output a high power for fast and consistent trigger response and high rate of fire for up to 3 quarters of a day on a slow charge.
- 7.4V 2S LiPo
- 1000mAh Capacity
- Ideal for crane stocks & handguards
If you need slim 7.4V crane stock LiPo for your crane stock or handguard battery compartment, the VP Racing 7.4V 1000mAh 20c LiPo Crane Stock Battery should do the trick. This 7.4V 2S LiPo stick battery is fitted with a Deans battery connector and is comprised of 2 cells, each of which measures 11 x 1.5 x 0.5 cm. The wire length between the cells and connector is approximately 10cm, giving you a bit of flexibility to ensure the battery is installed properly. As always, we recommend measuring thoroughly to ensure it fits before ordering!
- 11.1v LiPo
- 600mAh Capacity
- Ideal for PDW Stocks
An 11.1v rated LiPo Battery for Airsoft Electric Guns, featuring a Deans Connector to provide an efficient connection to your AEG. With a 600mAh Capacity, the overall dimensions are quite small, making it ideal for PDW Stocks, Pistol Grips and other really tight Battery Compartments.
- 11.1v LiPo
- 600mAh Capacity
- 20/40C Discharge
A LiPo Battery for Airsoft Electric Guns, with an 11.1v rating and 600mAh capacity. This compact 11.1v LiPo is ideal for PDWs and Airsoft Guns with a small battery space (specifically the Specna Arms PDWs), and features a Mini Tamiya Connector to connect to your AEG. If you have an Airsoft Gun that needs an 11.1v Battery, and has a tight battery compartment, then this is the ideal LiPo for you.
- 1300mAh
- 25c Rating
- 7.4v 2S LiPo
A high quality 1300mAh 7.4V LiPo battery suitable for Airsoft and RC use - perfect for fitting down stock tubes and areas with a small amount of space.
- 2600mAh
- 25c Rating
- 7.4v 2S LiPo
A compact LiPo battery designed for crane stock use but also suitable for compact Airsoft hand guards too, this variant of the battery is fitted with a Deans connector for upgraded Airsoft Gun connectors, rather than the standard Mini Tamiya.
- 11.1V 3S LiPo
- 1300mAh Capacity
- Stick config - Perfect for buffer tubes
If you're looking for an 11.1V LiPo which fits neatly into an AR buffer tube, this is the one! The VP Racing 11.1V 1300mAh 25c LiPo Stick Battery - Deans measures approximately 10.4 x 1.9 x 1.9 cm with 4cm of wire length, making it great for buffer tubes and other cramped but relatively long battery compartments. As always, make sure you measure your battery compartment before ordering to avoid disappointment!
- 1300mAh
- 11.1v 3S LiPo
- Crane Battery
A super thin triple crane stock 11.1v 1300mAh 25C LiPo, which features a Deans Connector instead of the standard Mini Tamiya.
- 1450mAh
- 11.1v 3S LiPo
- Crane Battery
A triple crane stock 11.1v 1450mAh 25C LiPo, which features a Deans connector instead of the standard small Tamiya.
- 7.4V 2S Stick battery
- 20C Discharge rate
- 1300mAh Capacity
If you need a battery for your M4/AR-15 buffer tube or your top-wired AK AEG this should be perfect! The VAPEX 7.4v 1300mAh 20C LiPo Stick Battery measures 14 x 1.2 x 1.8cm approximately with a wire length of 9cm, making it a good fit in rear wired M4s with a buffer tube battery compartment, SMG-5K AEGs or AK AEGs in the top-wired configuration.
The pre-installed battery connector is the common mini-Tamiya type and the battery has a discharge rate of 20C, making it ideal for Airsoft applications but also useful for those needing a compact power source for electronics or R/C projects.
- 7.4V 2S LiPo
- 680mAh Capacity
- For CYMA CM.1xx AEPs
If you need spare batteries for your AEP with a bit more oomph than the standard NiMh, this will do it! The IPower 7.4v 680mAh 20c LiPo Micro Battery is designed for CYMA CM.1xx series AEPs, fitted with a standard AEP connector and sized to fit AEP battery compartments. This battery is NOT compatible with AEP SMGs like the VZ61, MAC-10 or SMG-7 or the MOSFET-equipped CM.1xxS series.
This battery can be charged via its balance port using a LiPo balance charger, and as always, we recommend never leaving a LiPo on charge unattended and always using a LiPo charging bag.
- 1450mAh
- 11.1v 3S LiPo
- Crane Battery
An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries.
- 1450mAh
- 25C Rating
- 11.1v 3S LiPo
A large stick type battery, designed to output a high power for fast trigger response and rate of fire for up to three quarters of a day on a slow charge.
- 2200mAh
- 20c Rating
- 7.4v 2S LiPo
Suitable not only for Airsoft but for RC vehicles and toys too, this 7.4v 2200mAh LiPo Stick Battery will fit in tight areas like stock tubes and handguards where other batteries would normally not.
- 1600mAh
- Block Battery
- 11.1v 20C LiPo
An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries.
- 7.4v 2S
- 1500mAh
- 20C Rating
A 7.4v 1500mAh LiPo battery that provides a 20c discharge rate and is highly compact, making it ideal for external PEQ battery boxes and tight, square spaces.
- 2200mAh
- 15c Rating
- 7.4v 2S LiPo
A LiPo crane stock battery designed to fit in stocks and small spaces which other large batteries do not fit.
- 1200mAh
- 20C Rating
- 11.1v 3S LiPo
A large stick type LiPo battery, ideally suited to fitting inside an M4 or M16 type AEG stock tube.
- 11.1v 3S
- 1100mAh
- 40C Rating
An ultra thin and lightweight battery, designed to squeeze into AK compartments. The battery provides 1100mAh of power with a discharge rate of 40C.
- 7.4V 2S Butterfly battery
- 30C Discharge rate
- 850mAh capacity
Those of you with limited battery space, this block battery is the one! The battery will fit near enough all AEG rifles and will be especially useful in rifles with PDW stocks. It has a voltage of 7.4v, a capacity of 2800mAh and a discharge 30C. The battery is connected to your AEG via the Deans connector, not to be confused with Mini-Tamiya connector, however, adaptors are available.
The battery measures 7.5x1.5x2.5cm with a cable length of roughly 4cm.
- 1300mAh
- Stick Battery
- 11.1v 3S LiPo
A high voltage Airsoft Battery designed to give your weapon the highest rate of fire possible, in addition to lasting as long as possible, reducing the amount of time players spend changing batteries on a Skirmish day.
About Our Airsoft LiPo Batteries
Shop high quality airsoft LiPo batteries and battery packs for your AEG with Patrol Base.
Offering high voltages that are great for upgraded Airsoft guns, get that rate of fire you’ve been chasing with LiPo batteries offering up to 11.1V. However, for standard replicas or for beginner players, we’d always recommend starting with something smaller, such as a 7.4V.
Our LiPo batteries come in all shapes and sizes, so you’ll be able to find compact styles that take up less space but still offer plenty of hours of gameplay.
Now that you’ve got your LiPo airsoft battery sorted, you’re going to need a charger to go with it. Luckily for you, we’ve got you covered with LiPo chargers that offer auto-stop.
Pick up your new LiPo battery today and enjoy next day delivery, or keep browsing and explore our entire airsoft battery collection, including NiMh airsoft batteries and more.