New Airsoft Guns & Products

If you're looking for a modern M4/AR-15 platform with internals to rival the best, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG should be in your sights. Taking traditional AEG silhouettes, the Specna's PRIME™ range boasts a full internal overhaul, equipped with some of the best parts available in a stock AEG. These improvements include the Magnus TDC HOP-up chamber paired with the Helium HOP-up bucking, 16:1 CNC Steel gears and the powerful Dark Matter Brushless motor, to name but a few!

The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

Fitted with a sound-amplifying muzzle device inset into its CNC aluminium KeyMod handguard, the SA-P07 brings sleek, dynamic looks to the table along with a menacing firing sound to keep the enemy at bay. If you're after a pre-upgraded AEG with as much bark as it has bite, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG deserves your attention!

If you seek a platform pre-upgraded to the nines which can go anywhere and do anything, your needs have been met with the Specna Arms SA-P20 PRIME™ M4/AR-15 M-LOK AEG! A full metal build with a lightweight skeletonised M-LOK handguard, the SA-P20 is ultra-modern on the outside and kitted out internally with the best feature set we've seen in a mass-produced AEG!

The PRIME™ range is Specna's newest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're after a full metal platform with the length to compete at long range and the agility to turn and burn up close, the Specna Arms SA-P20 PRIME™ M4/AR-15 M-LOK AEG should be on your shopping list. Upgraded beyond any other mass-produced platform you can buy off the shelf with Specna's ultra-modern full metal externals, the SA-P20 is ready to rock!

If you're in search of a stylish M4/AR-15 AEG and want a modern look, the Sector ASTRA IV Shadow M4 AEG is an excellent choice. This full-metal M4 platform is inspired by the latest AR platforms in the real steel world, boasting a uniquely designed receiver with a waffle-gripping texture, an M-LOK handguard, and a low-profile stock. It also features ambidextrous controls, making it perfect for all skirmishers!

Inside, we are equipped with a version 2 gearbox featuring 18:1 steel gears, a quick-change spring system, and the Ares EFCS MOSFET. This setup provides programmable fire controls via an Ares EFCS programming box (not included) and a low-voltage cutoff to protect your battery. It improves electrical efficiency and pairs perfectly with the pre-installed high-torque motor to provide a snappy trigger response in semi-auto, ideal for pumping out the suppressive fire. If you want a modern-looking rifle with a solid performance, the Secutor ASTRA IV Shadow M4 AEG is a superb option!

Tokyo Marui is known for its GBBR rifles, and for good reason! The ZET system is one of the most reliable gas systems out of the box, and provides a thunderous recoil that can only be described as wonderful. Any skirmisher who gets their hands on this superb rifle is sure to enjoy its realistic style and feel.

This Tokyo Marui rifle is based on the URG-I (Upper Receiver Group-Improved), a rifle that is used by many special forces groups across the world. It features an M-LOK style handguard as well as a special forces style four-prong flash hider. It's a great option for anyone looking to get into MilSim or interested in a military-inspired loadout.

The great thing about Tokyo Marui platforms is that there is no struggle finding after-market parts, not that you will need many aftermarket parts, because this rifle is built for performance and reliability. If you've been searching for that extra taste of realism from your Airsoft replicas, the Tokyo Marui URG-I 11.5" SOPMOD Block 3 ZET System GBBR is perfect for you!

The perfect BBs for CQB pistol, SMG and assault rifle users! These BBs are the midground between 0.2g and 0.25g, the most common BBs used for CQB. They come in a 1KG resealable bag, meaning you get roughly 4350 BBs in the bag. If you find your shots drop short with 0.25s but 0.2s don't give you enough power, you should definitely try these!

They are optimal for most CQB platforms as well as MOSCARTs and support gunners who don't care for the specifics of their BBs; they just want to shoot a lot at the enemy.

If you're eyeing up the PTS Syndicate Dead Air Wolverine Suppressor but your AK has 24mm CW barrel threads, this is the adapter you need! Made from CNC-machined aluminium to the high standards we expect from PTS Syndicate, the 24mm Thread Adaptor for Dead Air Wolverine Suppressor replaces the standard 14mm CCW rear cap of the Wolverine, allowing it to mount to 24mm CW male threading.

This ultra-thin Specna Arms 7.4V 1000mAh 30C Micro PEQ LiPo Battery is perfect for a PEQ box wired gun, such as the Specna Arms SA-H01. It can squeeze into some tight spots, but with its dimensions of 6.5x1x3.5cm, it will sadly not fit in PDW stocks but may fit in some SMG and AR36 handguards.

As it is a 7.4V LiPo, it is compatible with pretty much every Airsoft gun, and its Deans-style connector is optimal as most modern Airsoft guns are coming with Deans connectors installed due to its lower electrical resistance when compared with Tamiya connectors. If you need a teeny tiny battery for something, the Specna Arms 7.4V 1000mAh 30C Micro PEQ LiPo Battery; Deans could be your best shout!

If you're running a retro AEG and need a battery with a Large Tamiya connector, GFC has you covered! The 9.6V 2200mAh Ni-Mh Nunchuck Battery; Large Tamiya is an 8-cell NiMh battery wired in nunchuck configuration as two cell groups with 5cm of wire length between the cells and the pre-wired Large Tamiya connector. 

The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance charging, so you can use any charger as long as it's NiMh compatible. Just make sure not to leave the battery charging unattended, and as always, we recommend using a battery safe charging bag for both storage and charging. 

Ideal for fixed stock battery compartments but a bit too chonky for crane stocks, this battery is ideal for Cybergun FAMAS replicas or older TM AEGs with Large Tamiya connectors (TM M14, M16A1/A2, FAMAS, etc.). 

If you're looking for a stylish stock for your AR buffer tube-equipped platform, the EMG DD Type Stock for M4/AR-15 is a fine choice! Supplied with an M4/AR-15 AEG buffer tube but compatible with any AR buffer tube-equipped platform, including GBBRs, this stock is styled after the real steel DD Tornado collapsible stock, perfect for any modern build. 

Like the real DD Tornado, the EMG replica includes rubber cheek rests on either side for a positively luxurious cheekweld, along with a serrated butt plate set at an angle ideal for use with body armour or tactical vests. The stock features an ambidextrous QD sling socket and conventional "footman loop" sling slots, ready for your sling setup of choice. 

Inside, the EMG DD Type Stock includes a battery compartment similarly sized to a Crane stock, ideal for crane/nunchuck batteries or accessory batteries for GBBR users. The compartment can be accessed by pressing the button marked "EMG" in the centre of the butt plate, after which the butt plate can be lifted free. The set also includes a 6-position M4/AR-15 AEG buffer tube made from aluminium with a steel castle nut, though you don't have to use this if your primary is already rocking an AR buffer tube. If you're after a modern stock with a stylish, premium look, the EMG DD Type Stock for M4/AR-15 belongs on your build!

If you're looking for a stylish stock for your AR buffer tube-equipped platform, the EMG DD Type Stock for M4/AR-15 is a fine choice! Supplied with an M4/AR-15 AEG buffer tube but compatible with any AR buffer tube-equipped platform, including GBBRs, this stock is styled after the real steel DD Tornado collapsible stock, perfect for any modern build. 

Like the real DD Tornado, the EMG replica includes rubber cheek rests on either side for a positively luxurious cheekweld, along with a serrated butt plate set at an angle ideal for use with body armour or tactical vests. The stock features an ambidextrous QD sling socket and conventional "footman loop" sling slots, ready for your sling setup of choice. 

Inside, the EMG DD Type Stock includes a battery compartment similarly sized to a Crane stock, ideal for crane/nunchuck batteries or accessory batteries for GBBR users. The compartment can be accessed by pressing the button marked "EMG" in the centre of the butt plate, after which the butt plate can be lifted free. The set also includes a 6-position M4/AR-15 AEG buffer tube made from aluminium with a steel castle nut, though you don't have to use this if your primary is already rocking an AR buffer tube. If you're after a modern stock with a stylish, premium look, the EMG DD Type Stock for M4/AR-15 belongs on your build!

If you're modernising your SMG-5K/MP5K AEG, Laylax has just the thing! The 1913/20mm Picatinny Stock Adapter for SMG-5K/MP5K AEG is made from CNC-machined aluminium, designed for TM-based MP5K/SMG-5K AEGs. This adapter replaces the standard rear plate or side folding stock on MP5K/MP5PDW AEGs with a 1913 stock interface, allowing you to mount any 1913/20mm Picatinny stock and quickly change stocks in seconds. 

The 1913 interface is the latest up-and-coming stock mounting interface from the real steel world, being present on the Sig MPX and MXC, several B&T SMGs, the VMP-2S/SD/C and innumerable other platforms via adapters. This allows you to choose from side-folding skeleton stocks in several styles, AR buffer tubes, Visor/respirator stocks and many, many more. If your MP5K/SMG-5K or MP5PDW/SMG-5PDW needs a fresh new look, this adapter is the key!

If your primary is rocking a PTS Dead Air Keymo muzzle device and you want to add some Ruskie styling, this adapter will do the trick! The PTS Keymo QD Adaptor for Dead Air Wolverine Suppressor replaces the standard 14mm CCW threaded rear cap of the Wolverine with a Keymo QD interface, allowing it to mount to any PTS Dead Air Keymo muzzle device and be removed in seconds.

To keep the KTC KG-9 GBB SMG Pistol well fed, you will need some spare magazines! The KTC 55rnd Gas Magazine is exactly that! Compatible with the KG-9 exclusively, this magazine is exactly what you need if you want to run the TEC-9-inspired platform on the battlefield.

It is constructed from alloy and holds 55 BBs, a good amount for firing shots in semi-auto, but can very quickly run dry if you enjoy full auto! It can be loaded like a standard gas mag through the feed lips or like a pistol mag by pulling the follower down and loading it from the bottom. The gas valve is located on the rear of the mag. These magazines are essential if you want to run the KTC KG-9 GBB SMG Pistol in battle!

If you're rocking a cutting-edge primary with the 1913/20mm Picatinny stock interface, get eyes on this beauty! The LCT 1913/20mm Picatinny X Folding Stock Set is made from a combination of a CNC 6061 aluminium stock bar, S45C Steel folding mech and polymer butt plate, a unique side folding stock design inspired by real-world 1913 stocks. Quality-wise, this stock is top-notch!

The set includes two butt plate options, giving you the option to choose the look which suits your build and loadout best. The stock bar is skeletonised to mimic the looks of real steel 1913 stocks and includes an ambidextrous QD sling socket, ready for QD sling swivels on either side. If you're styling up your 1913 interface-equipped platform, the LCT 1913/20mm Picatinny X Folding Stock Set is a versatile alternative to more common stock options!

If you're looking for a suppressor with the retro Russian look but packed with modern features, the PTS Syndicate Dead Air Wolverine Mock Suppressor belongs on your build! This replica silencer is based on the real steel Dead Air Wolverine, a modern suppressor design inspired by the real steel PBS-1 suppressor of the Soviet era. By default, the Wolverine mounts to 14mm CCW male barrel threading present on the vast majority of Airsoft rifles, but its design means you have more options than just that!

The Wolverine keeps the utilitarian aesthetic of the original PBS-1 but adds modularity into the mix in the form of interchangeable front apertures and a modular collar capable of being adapted with aftermarket parts to mount to either 24mm CW Russian threading or Dead Air Keymo muzzle devices. Inside, we are treated to polymer baffles to reduce noise, and just like the Sandman series, these baffles are very effective with HPA and gas-powered platforms. If you're mimicking a modern real steel tactical AK build or you want a PBS-1-style suppressor which doesn't weigh a ton, the PTS Dead Air Wolverine Mock Suppressor is a fine choice!

If you're running a TM ZET system or CYMA CGS M4/AR-15 GBBR and want immunity from cooldown without HPA, this is the ticket! The CYMA 30rnd CO2 Magazine for CGS/MWS GBBRs is powered by 12g CO2 bulbs, one of which can be inserted into the magazine by removing the CO2 plug on the bottom. The benefit of CO2 magazines is their practical immunity to the effects of "cooldown", resulting in better rapid fire and cold-weather performance.

A hidden trick of this magazine is its ability to be reloaded without being removed, thanks to its nifty replaceable BB track, just like the CYMA CGS HPA magazine. This means if you've still got CO2 left in the tank, you don't need to switch the entire magazine, just pull the tab on the bottom of the mag forward, and you can pull the BB track out and replace it with a fresh one. Like other GBBR magazines, this magazine is loaded through the feed lips on the top, and we recommend using a speed loader with a GBB adapter to make loading easier. 

Compatibility-wise, this mag is designed for CYMA CGS M4/AR-15 GBBRs (and EMG GBBRs made by CYMA) but should also work in other TM ZET system-based designs. If you want to keep your GBBR kicking when the weather gets cold, the CYMA 30rnd CO2 Magazine for CGS/MWS GBBRs belongs on board!

If you're styling up your AK, the 5KU Zco Sport-1 Handguard for AK-74/AK-105 is the key to a slick, modern setup! Inspired by the real steel Zco Sport-1 handguard set, the 5KU version includes a lower handguard, gas tube cover and handguard extension, allowing you to take advantage of the modularity of the Sport-1 setup. 

The "B-31L" gas tube cover features a skeletonised 20mm Picatinny rail at the 12 o'clock position, ready for a tactical flashlight, laser aiming module or forward-mounted red dot sight. The B-10L handguard and DL-1 extension include Zco's BASIS attachment slots at 3, 6, and 9 o'clock, ready for BASIS accessories or BASIS rail adapters. As long as you have the B-10L handguard installed, the other parts are purely optional. If you prefer a minimalist build, you don't have to run the gas tube cover or handguard extension, though being made from CNC aluminium means they barely add any weight when installed. 

Compatibility-wise, this set should fit most AK AEG and GBBR platforms with the realistic VFC/LCT build style, including CYMA CM.04x series, Specna Arms J series, Evolution "Hard Core" AKs, ARCTURUS AKs and S&T AKs, though in some cases modification will be required. Unfortunately, it is not compatible with AKS-74U-style replicas. If your AK needs a style-up, look no further than the 5KU Zco Sport-1 Handguard for AK-74/AK-105!

If you're looking for a tracer suppressor with the retro Russian look but packed with modern features, the PTS Syndicate Dead Air Wolverine Tracer Unit is one of the best options out there! This replica silencer is based on the real steel Dead Air Wolverine, a modern suppressor design inspired by the real steel PBS-1 suppressor of the Soviet era. By default, the Wolverine mounts to 14mm CCW male barrel threading present on the vast majority of Airsoft rifles, but its design means you have more options than just that!

The Wolverine keeps the utilitarian aesthetic of the original PBS-1 but adds modularity into the mix in the form of interchangeable front apertures and a modular collar capable of being adapted with aftermarket parts to mount to either 24mm CW Russian threading or Dead Air Keymo muzzle devices.

Inside, we are treated to a tracer module, ideal for adding an instinct aiming advantage in low-light environments. If you're mimicking a modern real steel tactical AK build or you want a PBS-1-style tracer unit which doesn't weigh a ton, the PTS Dead Air Wolverine Tracer Unit is the finishing touch your build needs!

If you're after a full metal AK with Russian vibes, the Evolution E-74 AKS-74 Paratrooper AEG is a solid choice. Boasting full metal construction with plenty of stamped steel in the mix, the E-74 is inspired by the real steel AKS-74, the folding stock variant of the Cold War era AK-74 issued to airborne troops and mechanised infantry.

Inside, the E-74 is equipped with basic but reliable internals, based around a TM-spec version 3 gearbox with 18:1 ratio steel gears running on 6mm ball bearing bushings. The piston is polymer with a full steel tooth rack, and the spring guide is a quick-change example, making power tuning a breeze. Also inside is a 6.01mm tightbore inner barrel paired with an alloy slider adjustable HOP-up unit, providing superb accuracy potential with high-quality BBs. Those looking for a simple yet effective full metal AK, look no further than the Evolution E-74 AKS-74 Paratrooper AEG!

If you need a "bad guy" primary but don't want to spend too much, the Evolution E-104 AK-104 Tanker AEG is calling your name! A full metal build with a steel receiver and top cover, the E-104 is based on the real steel AK-104, a short-barreled AK rifle intended for airborne troops and special forces, ideal for a wide range of OPFOR-themed loadouts.

Inside, the E-104 is equipped with basic but reliable internals, based around a TM-spec version 3 gearbox with 18:1 ratio steel gears running on 6mm ball bearing bushings. The piston is polymer with a full steel tooth rack, and the spring guide is a quick-change example, making power tuning a breeze. Also inside is a 6.01mm tightbore inner barrel paired with an alloy slider adjustable HOP-up unit, providing superb accuracy potential with high-quality BBs. Whether you're after an affordable OPFOR platform or simply appreciate a simple yet effective full metal AK build, the Evolution E-104 AK-104 Tanker AEG is a solid choice!

The Speedsoft style doesn't always need to be bright colours and HPA tanks. Sometimes, it looks like a gun straight out of a futuristic COD game! The ARCTURUS X C.A.T. Versatile-10S AK AEG FE™ has an extremely unique design and equally unique ARCTURUS Centaur V2 gearbox. The enhanced internals and FE™ programmable MOSFET/ETU system make for some impressive shooting, too.

This rifle is clearly based on the Russian AK rifle; however, it is a far cry from the original Kalashnikov platform. With its extremely skeletonised design and modern style, the only tell that it's an AK is its curved magazine! The skeletonised M-LOK /20mm Picatinny hybrid handguard allows for plenty of accessories while being super fast to steer between targets thanks to its ultra-low weight.

Plus, its snag-reduced receiver design features ambidextrous controls to ensure your weapon handling is super slick, whether you're left or right-handed. The C.A.T. Versatile series from ARCTURUS offers fully modular platforms in which you can change the handguard, stock and even the magazine well! The versatile part of the name really makes sense...

If you miss the days of simple yet reliable AEGs like the G&G Combat Machine, the CM16 STEALTH 556 Combat Machine AEG brings proven Combat Machine internals to an exciting new format! Made predominantly from high density polymer with an alloy outer barrel, alloy buffer tube and steel trim parts, the CM16 STEALTH 556 is uniquely modern on the outside with an enhanced receiver, M-LOK/20mm Picatinny hybrid handguard and a new generation of G&G ergonomic furniture.

Inside, the CM16 Stealth is based around the version 2 gearbox, equipped with 18:1 ratio steel gears, an 18K RPM motor and a true quick-change spring system. The new G&G quick-change spring system means you no longer have to remove the gearbox from the receiver to switch springs, making power tuning easier than ever before. Also inside is G&G's latest rotary HOP-up design, providing superb airseal and the usual rotary HOP-up perks of easier adjustment in fine increments and improved setting retention under the vibrations of full auto fire. Our test example showed incredible consistency on the chrono (1-3 FPS deviation at maximum), pointing to a well-built gearbox which should provide very tight groupings downrange.

While it may not have an ETU or anything super fancy on the inside, the CM16 STEALTH 556 Combat Machine AEG is focused on reliability and will probably keep running for decades, like owners of the eternal original Combat Machine experienced with what is probably Airsoft's most reliable AEG. If you're looking for the perfect backup or loaner platform which will never let you down, the G&G Armament CM16 STEALTH 556 is the one!

If you're after a truly demonic CQB platform which weighs less than a packet of crisps and shoots like a minigun, you must be talking about the G&G Armament ARP9 3.0P Enhanced Combat Machine AEG! The latest version of G&G's CQB game-changer, the ARP9 3.0P, is lighter and more affordable than ever before.

Like the previous versions, the 3.0P is 11.1V LiPo ready straight out of the box, and its internals are based on an enhanced G&G V2 gearbox design, dubbed the MIG (MOSFET Integrated Gearbox). The MIG features G&G's new MOSFET system, which is smaller and more efficient than ever before, and a QD spring guide to allow for easy power tuning. Other innovations include a new side-folding stock system, known as the CHFS, and a new double-feed magazine. The other awesome G&G pre-upgraded internals remain, including the epic 25,000 RPM high-speed motor, ready to provide the thunderous rate of fire the ARP9 is known for!

As far as CQB primaries go, the G&G Armament ARP9 3.0P Enhanced Combat Machine AEG is in a league of its own, honed specifically for challenging environments with a focus on performance and ease of use. A platform no one wants to face down with in the tight confines of a CQB site, the ARP9 3.0P is the game-changing SMG everyone is happy to see on their team!

If you're after an AEG which won't need a tech's touch to shoot perfectly, the Specna Arms SA-P14 PRIME™ M4/AR-15 M-LOK AEG is one to watch. The PRIME™ range is Specna's latest and greatest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. These improvements include the Magnus TDC HOP-up chamber paired with the Helium HOP-up bucking, 16:1 CNC Steel gears and the powerful Dark Matter Brushless motor, to name but a few!

The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're searching for a full metal AR you don't need to mess with, the Specna Arms SA-P14 PRIME™ M4/AR-15 M-LOK AEG ticks all the boxes! A full metal build which handles like a dream with stock internals rival platforms can only dream about, the SA-P14 is ready to go anywhere and do anything!

This slick rifle is ready for any tactical scenario. Its streamlined style and upgraded internals make for an incredible special forces primary! It has a steel three-prong flash hider, aluminium M-LOK and low-profile polymer stock. It also has QD points for double sling point setups, or a steel sling plate if you prefer a single sling point.

The ASTER ETU is a great addition to this rifle, boasting a plethora of features and functions that take the rifle's performance to a whole other level! Some of its key benefits are trigger sensitivity adjustments, increased rates of fire and trigger response, programmable binary and burst modes and protection against battery reverse polarity.

An Airsoft, gas blowback, open bolt SMG, what's not to love? The KTC KG-9 GBB SMG Pistol is the perfect CQB platform or backup to a sniper setup. This SMG is based on the absolutely iconic TEC-9 SMG from Intratec, with the ported barrel shroud, long stick magazine and fixed iron sights.

The gas blowback design of this SMG is incredibly satisfying. Thanks to the open bolt design, every shot produces a realistic recoil feeling that makes you feel like you're shooting the real thing. SMGs don't get more iconic than this design. If you're a collector, the KTC KG-9 GBB SMG Pistol belongs on your wall at the very least!

If you've encountered issues with your Specna Arms PRIME™ M4/AR-15 AEG's gearbox, you're in luck! This replacement gearbox shell is an original replacement part, allowing you to revive your AEG back to good health. It comes with the J-Cage bearings pre-installed, meaning it is unlikely to be compatible with other AEGS.

This reinforced Gearbox has an anti-reversal release window, pre-cocking and AoE inspection windows, reinforcements in high-stress areas, a motor gear inspection window, a trigger adjustment function and screw holes allowing for easy alignment. Get a quick fix for your PRIME™ AEG with the Specna Arms Aether™ V2 Gearbox Shell w/ J-Cage Bearings!