Airsoft Attachment & Accessory Discounts

If you need to load up on MPX magazines you have found what you need! This 100rnd Mid Cap Magazine is designed for the SigAir/VFC MPX AEG and is a rattle free mid-cap design which holds 100 6mm BBs. The fill/feed port is located at the top of the magazine and it can be loaded using a standard Airsoft speed loader or loading tool.

This magazine design perfectly mimics that of the real thing, including its clear polymer body and detailed mock 9x19mm cartridges visible through the body. The sides, front and rear boast moulded in gripping texture to avoid potentially dropping or throwing the magazine during a reload in wet weather and these can do double duty as a makeshift grip for shooting in unconventional positions. On the left side of the magazine we are also treated to licenced trademarks, with "SIG SAUER 9x19" proudly displayed in recessed lettering. If one could call a magazine beautiful, it would be this one!

A must have set for any Airsofter and Air Pistol Dan Wesson Revolver owner.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss!

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss!

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

A pack of 10 Rubber Stop Caps for ASG 40mm Airsoft Grenades, which simply fit into the top of the Shell once they are filled with BBs.

An upgraded optic over the traditional standard 3-9x50 alternative. The E version comes with illumination settings with both Red and Green illumination levels.

If you are experiencing issues with semi-automatic as your AEG gets older, the likelihood is your switch assembly/trigger contacts have become corroded and need replacing. Fortunately KRYTAC are here to provide a complete pre-wired switch assembly, complete with their in-line MOSFET which provides protection to the circuitry and prevents the AEG from firing if the battery voltage drops too low. The assembly comprises of the trigger contacts, MOSFET, automotive fuse, male Deans connector, and spade connectors, all wired together and ready to go once installed.

A rubberised vertical foregrip for Airsoft replicas with a 20mm rail, offering stability and a comfortable platform to brace your rifle.

A mock Airsoft suppressor designed specifically for the MP9 GBB submachine gun, featuring genuine Brugger & Thomet AG licensed trademarks.

A Gas blowback magazine designed as a replacement or spare for the KC-02 Special Teams Carbine licensed by ASG. With a an ammunition capacity of up to 29 rounds.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss!

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

A replica MK2 hand grenade with a hollow middle, allowing you to fill it with roughly 600 BBs.

An Airsoft medium capacity magazine that is ideal for the Airsofter wanting to inject a little more realism into their skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG magazine compatible Airsoft guns.

A mock PEQ Box, designed to hold PEQ size Airsoft batteries for your AEG weapon enabling easy access and storage for batteries on front wired weapons by mounting onto a 20mm RIS Rail system.

Only with AKs can get you can get a mag like this, so AK fanboys count yourself lucky. Styled after the Russian design of the AK quad stack magazine, this AEG flash magazine holds a whopping 1000 rounds so you can stay on the field without changing mags for a crazy amount of time.

With a textured front and back for easy mag grippage, the magazine is reloaded using the top fill window and being a flash mag, it is wound (reloaded) at the bottom using the pull cord.

So if you're a fan of AKs and hate reloading, this chunky boy is for you!

If you're having issues with your AEG, and being able to pull the trigger in safe then it is likely your safety lever is bust! The G&G Armament Trigger Safety Lever For V2 Gearbox is the replacement part for you, a new safety lever will ensure that the trigger cannot be depressed while your AEGs safety is engaged.

This part is constructed from alloy and is compatible with all version 2 gearboxes. It includes the spring and the screw so you can install it all together. Be warned though, it can be a techy repair and we only recommend that professionals attempt it!

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

The G&G Armament G2 Tappet Plate For V2 AEG is a reinforced AEG Tappet Plate for use with version 2 gearboxes. It is specially formulated to be strong yet flexible enough to bend slightly. The plate is constructed from extremely lightweight polymer and is designed to be attached to the air nozzle and sector gear. This process controls the feeding of BBs from the magazine into the hop up chamber.

It is compatible with almost every Version 2 gearbox on the market and comes with only the tappet plate.

A spare or replacement 50rnd short magazine for the Krytac Kriss Vector, which is made to a high standard with excellent quality Polymers, and features the KRISS trademark as well as faux round count.

If you're looking for a new outer barrel to make your M4/AR-15 AEG reach the moon, the 5KU 18" Aluminium Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 18-inch outer barrel includes pin holes for mounting an M4/AR-15 front sight/gas.

The 5KU 18" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're extending your barrel for the improved long-range effect or you just want your Airsoft rifle to look massive and intimidating, the 5KU 18" Aluminium Outer Barrel belongs on your M4 AEG!

A complete upgrade Cylinder set for AEGs which includes: Cylinder, Piston, Cylinder Head, Piston head and Nozzle. Improve your air seal and shot for shot efficiency today for improved range and accuracy.

A Full Polymer constructed Mid-Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to inject more realism into their play-style.

Those of you looking for a battery with a truly large capacity, you've come to the right place! The battery is perfect for larger battery compartments such as SMG-5, G3, M16 and AK platforms with fixed stock battery compartments. The battery has a voltage of 7.4v, a capacity of 2800mAh and a continuous discharge rate of 25C with a maximum discharge rate of 50C. The battery is connected to your AEG via the Mini-Tamiya connector, not to be confused with a Deans connector, however, adaptors are available.

The battery measures 13x1.1x4.2cm with a cable length of roughly 10cm.

With the NUPROL 1200rnd Electric drum magazine, you will have all the firepower necessary to deal with the foes on the battlefield. A massive drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to push back any opponents who dare challenge you.

This drum magazine is constructed from high-density polymer and is the first of its kind for the NGRS system! If you miss the mega capacity of a high-capacity wheel-wound magazine, this is leagues above that. More BBs, more hits... right?

Please note, this drum magazine is ONLY compatible  with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

If you have worn out your AEGs trigger or you want the mil-spec look to replace your current trigger, this is perfect for you! The G&G Armament Trigger For V2 Gearbox is constructed from alloy with a textured finish and is patterned after the standard curved "Milspec" trigger found on the M4A1 rifle, MK18 MOD.0 and MOD.1, along with most other M4/AR-15 rifles used in military service in the real world.

The trigger is compatible with version 2 gearboxes which are found in the vast majority of M4/AR-15 AEGs. This means that the G&G Armament Trigger For V2 Gearbox trigger should work in practically any M4/AR-15 AEG but will require the gearbox to be opened for installation.

If you've had a cut-off lever failure or you like to keep parts on hand just in case the worst happens, the G&G Armament Cut Off Lever For V2 Gearbox is perfect. This is a replacement original part constructed from alloy, compatible with most version 2 gearboxes on the market.

The cut-off lever is a piece that sits between your trigger and sector gear and serves to interrupt or disconnect the trigger once your gearbox has made a complete cycle, very useful!

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

A replacement original KRYTAC part which fits version 2, 3, 6 and 7 gearboxes. This cylinder is a Type 1, meaning it has a port in the side intended to reduce the air volume for use on short barrelled platforms (<363mm inner barrel) and prevent the "suck back" phenomenon.

An 11.1v 2000mAh Li-Ion battery for Airsoft Electric Guns, which comes supplied in a Crane/Butterfly/Saddle configuration, meaning two rows of cells. This makes them very easy to place in awkard-to-fit spots such as Handguards and Crane Stocks, and will provide better Power Density that traditional LiPo batteries.