Airsoft Boneyard

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has landed in our boneyard for unknown reasons - as far as things go, we cannot test for any sort of fault that this replica may or may not have due to the charger and battery being missing. Given this situation; if there is faults then ultimately this replica may be more suitable as a prop for cosplay or even a parts donor.

This replica has found its way into our boneyard due to the magazine latch not being present - the entire latch alongside the spring is missing meaning the magazine may have fallen out during use as that isn't present either. Alongside these issues, the charger and battery are also missing so replacements are to be sourced if you're wanting to use this replica if it's functional which we cannot test given we have no battery to verify if there's any faults present. This replica may better suit being a parts donor given the already missing parts and uncertainty of functionality though could also be suitable as a prop for cosplay.

This replica has landed in our boneyard due to the magazine catch being disassembled - from what we can see, all necessary parts are contained in the box but again is disassembled so we can only assume either part is damaged in some sort of fashion and would recommend doing an investigation to see if it works and if it doesn't to source the replacement parts. Since the battery and battery charger is also missing, we cannot verify if the replica is functional so we cannot guarantee if you will get a faulty or non-faulty platform. Ultimately if it is faulty, it could double as a prop for cosplay or even as a parts donor due to the good condition the externals are in.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional.

From what we can gather though based off the external quality, this may have been an ex-display due to the two-tone paint being in mint condition alongside of the replica so there may be a chance that the replica is fully functional but once again, we cannot guarantee that this will be the case. Ultimately you could use this as a prop for cosplay if the replica isn't functional.

This replica has found its way into our boneyard due to missing its magazine - given that the magazine is missing, there's no way to test the replica for faults though doing a field strip and inspecting parts seem to indicate that there isn't anything horrifically wrong as far as we're aware.

This replica is two toned so you obviously won't need UKARA in order to obtain this platform although whilst we had the slide removed from the frame, the slide tracks has a good amount of paint gunked up that will need cleaning if you're wanting to get the best performance out of the platform if you do find a magazine for it. The replica for some reason is also in an AEP box - most likely for safe keeping.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has found its way into our boneyard for unknown reasoning - with this in mind, we cannot test the replica to find any potential faults due to the battery and battery charger going missing. Because of this, we cannot guarantee that you'll receive either a faulty or fully functional replica - regardless you could use this replica as a prop for cosplay or as a parts donor if your own AEP has damaged externals or internals. The two-tone paint is slightly worn so it will need a bit of TLC.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. It also seems this replica needs a bit of TLC as there's various marks and scratches across the slide and frame albeit hard to see. Even then, this would be decent as a prop for cosplay.

This replica has found its way into our boneyard due to an issue with the hammer resetting - you can manually cock the hammer using the external hammer and fire the replica however using the trigger itself results in failure. When the replica does shoot, we were seeing an average of 270 FPS on .2 BB's using Abbey Predator Ultra Green Gas.

We also discovered that the magazine is quite difficult to insert into the replica during testing and requires you insert the mag at a weird angle which will also need looking at.

This replica has found its way into our boneyard for a few reasons - first of which is part of the housing that holds the spring for the external hammer has broken which means the slide cannot be secured in place since this is what holds the slide and frame together. Alongside this, the replica is missing its battery and charger meaning we cannot test for any faults and to see if the replica is functional so you'll have to prepare for this if you source replacements. If the replica is non-functional, it could work as a prop for cosplay or even be a parts donor if it is functional.

This replica has landed in our boneyard due to supposedly not being functional - we cannot verify if this the case however due to the battery and charger being missing meaning we have no method to test the replica. With this in mind if you do receive this platform and it's not functional, it could be perfect as a prop for cosplay or even as a parts donor.

This replica has landed in our boneyard due to a few issues - first of which is that the tabs that secure the slide in place have snapped off completely meaning theres nothing to secure the slide and will fall off during use. Alongside this, it's missing its battery and battery charger so we cannot test its functionality so you could ultimately end up with a perfectly fine replica or something that needs some work doing to it internally. Apart from this; the replica used to be two-tone red but the paint was stripped - there is still residue red paint under the slide alongside in the serrations so this replica does need a bit of TLC.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has found its way into our boneyard for unknown reasons - it may have been ex-display but the missing charger and battery say otherwise. Given this, the replica is in extremely good condition with barely any scuff marks across the slide and frame. Due to missing its battery and charger, we cannot test the replica to see if it actually has any faults but otherwise this replica would make a good prop or parts donor if it is faulty.

This replica has found its way into our boneyard for unknown reasons - it may have been ex-display but the missing charger and battery say otherwise. Given this, the replica is in extremely good condition especially for being a two-tone with no residue paint anywhere on the lower frame that would otherwise be present from usage. Due to missing its battery and charger, we cannot test the replica to see if it actually has any faults but otherwise this replica would make a good prop or parts donor if it is faulty.

This replica has found its way into our boneyard for unknown reasons - as far as things go; it's missing its magazine, battery and battery charger as well as being marked in places suggesting this was used for a skirmish and may have been returned for a reason that we cannot determine so there's a good likelihood of this replica not being functional but that doesn't stop it from being a perfect prop for cosplay or even as a parts donor.

This replica has landed in our boneyard due to magazine retention issues - doing some quick fiddling suggests that the latch itself is worn down or has poor tolerances from factory as pushing the mag release in the opposite direction does hold the mag but as soon as you let go, the magazine will drop out. Apart from this issue, we are unsure on any other faults with this replica due to it missing its battery and battery charger so this may be better as a prop or as a parts donor if this replica turns up non-functional.

This replica has found its way into our boneyard for unknown reasons - we cannot determine what the issue is due to the missing battery and charger. You could otherwise use this replica for parts or if you have a spare AEP battery and the replica works, it could be a decent sidearm if you're going for a post-cold war US Army loadout - even if the replica has some sort of fault, it can still double as a prop.

This replica has found its way into our boneyard due to supposed cycling issues - with this in mind, we can't actually test if this holds true due to the missing battery and charger. You could otherwise use this replica for parts or if you have a spare AEP battery and the replica works, it could be a decent sidearm if you're going for a post-cold war US Army loadout - even if the replica has some sort of fault, it can still double as a prop.

This replica has found its way into our boneyard due to a faulty trigger - we're not sure what component is at fault as it could be one of many things such as a broken trigger linkage or a broken component within the trigger group - further investigation is required to determine the sauce of the fault. Other than this though, the replica is in really good condition so ultimately this could double as a wall hanger if you're into your Rugers.

This replica has landed in our boneyard due to damage to the magazine base plate - the front portion of the base plate has snapped off however this won't affect functionality of the replica; other than this, there isn't any other faults addressed - given it's a CO2 replica, we're unable to investigate any issues ourselves and will require investigation into potential faults that may possibly be present. Across the barrel there is a few marks and scratches alongside the grip so this replica does require some TLC.

This replica has found its way into our boneyard due to missing its selector - we cannot determine what fire mode the replica is in nor can we actually test if it works due to the missing battery and charger. You could otherwise use this replica for parts or if you have a spare AEP battery and the replica works, it could be a decent sidearm if you're going for a post-cold war US Army loadout - even if the replica has some sort of fault, it can still double as a prop.

This replica has landed in our boneyard for unknown reasons - as far as things go, we cannot test for any sort of fault that this replica may or may not have due to the charger and battery being missing. Given this situation; if there is faults then ultimately this replica may be more suitable as a prop for cosplay or even a parts donor.

This replica has landed in our boneyard due to a portion of the slide being chipped off - we're unsure how this has happened but ultimately doesn't affect functionality. Regarding function, we're unable to test for internal issues due to the battery and charger going missing so we cannot guarantee that the replica can actually shoot or has some weird electronic issue - if this is the case, this replica could ultimately serve as a parts donor or as some sort of prop.

This replica has found its way into our boneyard due to a supposed issue surrounding the replica draining batteries rapidly when plugged in - there's no definitive way to know the cause of this issue however we're unable to test this ourselves since the replica is missing its battery and charger so we cannot guarantee if this issue is persistent or if it's even present. Ultimately if the problem is present, you could use this replica for spare parts or as a prop as externally its in mint condition.