Airsoft Helmets & Helmet Accessories

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

If you're seeking replacement accessory rails for your PTS MTEK Flux helmet, you've found what you need! The PTS Syndicate M-LOK Accessory Rails for MTEK FLUX Helmet are made from Dupont Zytel Polymer and designed specifically for the PTS MTEK Flux. These rails provide M-LOK slots positioned horizontally and vertically, allowing a plethora of accessories to be mounted including headset arms and navigation lights.

These accessory rails are only for the Flux and are unlikely to fit other brands without modification. Whether you're refurbishing an old helmet or adding some unique contrast to make your lid stand out, the PTS Syndicate M-LOK Accessory Rails for MTEK FLUX Helmet are a fine choice!

If you're seeking replacement accessory rails for your PTS MTEK Flux helmet, you've found what you need! The PTS Syndicate M-LOK Accessory Rails for MTEK FLUX Helmet are made from Dupont Zytel Polymer and designed specifically for the PTS MTEK Flux. These rails provide M-LOK slots positioned horizontally and vertically, allowing a plethora of accessories to be mounted including headset arms and navigation lights.

These accessory rails are only for the Flux and are unlikely to fit other brands without modification. Whether you're refurbishing an old helmet or adding some unique contrast to make your lid stand out, the PTS Syndicate M-LOK Accessory Rails for MTEK FLUX Helmet are a fine choice!

If your helmet is a bit battered, no need to get a new one! The PTS Syndicate Impact Liner for PTS MTEK FLUX Helmet is a complete set of internal padding, the same type used in the PTS MTEK Flux Helmet. The foam padding is very comfortable, a considerable step up from the padding found in most clone helmets and thankfully, this padding should fit other helmets provided they have removable pads and internal velcro.

Whether you're seeking replacement padding for hygiene reasons or you want a comfort improvement, the PTS Syndicate Impact Liner for PTS MTEK FLUX Helmet will do the trick!

If you're after a menacing armoured look but don't want to sweat too much, the Novritsch Premium Tactical FAST Bump Helmet is a fine choice! This helmet replicates the real steel Bump FAST helmet, featuring ARC accessory rails on each side and an NVG mount up front, complete with a protective insert.

The set includes external Velcro, which can be mounted wherever you need it, allowing you to style up your lid with morale and I.D patches. Also included is a modular pad set, allowing you to get the perfect fit, regardless of your head geometry and whether you wear a comms headset or not.

One of the best features of this helmet is its OCC adjustment dial, located on the rear of the suspension. The OCC dial provides perfect stability when cranked down, meaning if you have an action camera or other kit mounted to your lid, it won't slide around on your head during dynamic movements. If you're going for the kitted-out look and need a lightweight but solid helmet that looks the business, Novritsch Premium Tactical FAST Bump Helmet is exactly that!

If you are looking for a helmet but want to remain light on your feet, the FMA FAST BJ Helmet Replica is definitely worth a look. This helmet is styled after the Base Jump/Bump FAST helmet and features a built-in NVG mount at the front, ARC rails on either side and a ported shell to improve airflow and comfort along with reducing the chances of goggles fogging. 

Also featured in this helmet is the game-changing OCC adjustment dial, designed to keep the helmet super snug and stable on your head no matter what you have mounted or how hard you sprint. If you're planning on running a GoPro or other action camera to record your Airsoft escapades, this is one of the most stable platforms you can mount it to!

If you are sick of stinging headshots, a helmet will cure that! The FAST Maritime Helmet Replica from FMA is a Milsim-friendly way to keep your head protected in game and comes kitted out with ARC accessory rails and an NVG mount so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly but is not ballistic and is only designed for looks. 

The real steel version of this helmet is used by DEVGRU, the Green Berets, the 75th Ranger Regiment and the Marine Raider Regiment (MRR/MSOR) and is a close match for the LBH Helmet used by the US Navy SEALs, making it a fine choice for the Milsim inclined. If you want to avoid painful headshots and look elite at the same time, this is the way to do it!

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

If you want to change up the looks of your FAST helmet, the 8Fields Tactical Helmet Cover for FAST Helmets is what you need. This cover is made from polyester mesh with external velcro to mount I.D or morale patches and style up your lid. The helmet cover is available in either "Mod.A" or "Mod.B" versions, with the Mod.A being ideal for FAST Bump helmets with their built-in NVG mount and Mod.B being suitable for FAST Ballistic style lids with a Norotos universal shroud style NVG mount. 

Available in a wide range of flat colours and camouflage patterns, the 8Fields Tactical Helmet Cover for FAST Helmets is the perfect way to help your helmet blend in in a wide range of outdoor and indoor environments!

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

A set of Adapters to attach your EARMOR Active Ear Protection Headsets to an M-TEK Flux Helmet Rail. If you own a pair of EARMOR Active Ear Defenders (such as the M32) and a M-TEK Flux Helmet, then this is the most efficient and comfortable way to combine the two. This method of mounting removes the needs for the large and cumbersome headband, making them far more pleasant to wear for a long skirmish.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If your helmet keeps getting you spotted, add the Novritsch 3D Camo Cover for FAST High-cut Helmet! This helmet cover is designed specifically for FAST High-cut helmets and replicas, constructed from a mixture of ripstop fabric and UV-resistant polyester mesh. The cover includes laser-cut 3D leaves to help break up your outline and disguise the usual shiny finish of most Airsoft helmets. 

If you're going for maximum concealment, add Novritsch LC1 Leaf Camouflage for an even greater edge out in the woods. Available in the usual range of camo patterns along with Novritsch's unique Kreuzotter pattern, the 3D Camo Cover for FAST High-cut Helmet is exactly what the woodland warrior needs for a stealthy playstyle!

If your helmet keeps getting you spotted, add the Novritsch 3D Camo Cover for FAST High-cut Helmet! This helmet cover is designed specifically for FAST High-cut helmets and replicas, constructed from a mixture of ripstop fabric and UV-resistant polyester mesh. The cover includes laser-cut 3D leaves to help break up your outline and disguise the usual shiny finish of most Airsoft helmets. 

If you're going for maximum concealment, add Novritsch LC1 Leaf Camouflage for an even greater edge out in the woods. Available in the usual range of camo patterns along with Novritsch's unique Kreuzotter pattern, the 3D Camo Cover for FAST High-cut Helmet is exactly what the woodland warrior needs for a stealthy playstyle!

If your helmet keeps getting you spotted, add the Novritsch 3D Camo Cover for FAST High-cut Helmet! This helmet cover is designed specifically for FAST High-cut helmets and replicas, constructed from a mixture of ripstop fabric and UV-resistant polyester mesh. The cover includes laser-cut 3D leaves to help break up your outline and disguise the usual shiny finish of most Airsoft helmets. 

If you're going for maximum concealment, add Novritsch LC1 Leaf Camouflage for an even greater edge out in the woods. Available in the usual range of camo patterns along with Novritsch's unique Kreuzotter pattern, the 3D Camo Cover for FAST High-cut Helmet is exactly what the woodland warrior needs for a stealthy playstyle!

If your helmet keeps getting you spotted, add the Novritsch 3D Camo Cover for FAST High-cut Helmet! This helmet cover is designed specifically for FAST High-cut helmets and replicas, constructed from a mixture of ripstop fabric and UV-resistant polyester mesh. The cover includes laser-cut 3D leaves to help break up your outline and disguise the usual shiny finish of most Airsoft helmets. 

If you're going for maximum concealment, add Novritsch LC1 Leaf Camouflage for an even greater edge out in the woods. Available in the usual range of camo patterns along with Novritsch's unique Kreuzotter pattern, the 3D Camo Cover for FAST High-cut Helmet is exactly what the woodland warrior needs for a stealthy playstyle!

If your helmet keeps getting you spotted, add the Novritsch 3D Camo Cover for FAST High-cut Helmet! This helmet cover is designed specifically for FAST High-cut helmets and replicas, constructed from a mixture of ripstop fabric and UV-resistant polyester mesh. The cover includes laser-cut 3D leaves to help break up your outline and disguise the usual shiny finish of most Airsoft helmets. 

If you're going for maximum concealment, add Novritsch LC1 Leaf Camouflage for an even greater edge out in the woods. Available in the usual range of camo patterns along with Novritsch's unique Kreuzotter pattern, the 3D Camo Cover for FAST High-cut Helmet is exactly what the woodland warrior needs for a stealthy playstyle!

If it's finally time for you to get some comms going and you want to rock the best, this bundle is here to help you out! Containing one of the best helmets and best headsets available on the market, equipping this setup will send the message that you know what you're doing.

If you're running a GoPro or other action camera on your FAST High-cut, add the Novritsch Helmet Pouch for FAST High-cut Helmets to store your power bank! This helmet pouch is designed primarily for counterweights to balance your lid when NVGs are mounted or power banks so you can keep your footage rolling all day long.

The pouch itself is constructed from a combination of Nylon and PVC, including elastic loops which are ideal for accessory batteries or chem-lights. Velcro is present along the top of your helmet when installed, allowing you to customise it with I.D and Morale patches. While it is designed specifically for the Novritsch Tactical Helmet, this helmet pouch should also fit most FAST High-cut helmet clones. The Novritsch Helmet Pouch for FAST High-cut Helmets adds a side of style to your helmet with loads of functional benefits!

If you're running a GoPro or other action camera on your FAST High-cut, add the Novritsch Helmet Pouch for FAST High-cut Helmets to store your power bank! This helmet pouch is designed primarily for counterweights to balance your lid when NVGs are mounted or power banks so you can keep your footage rolling all day long.

The pouch itself is constructed from a combination of Nylon and PVC, including elastic loops which are ideal for accessory batteries or chem-lights. Velcro is present along the top of your helmet when installed, allowing you to customise it with I.D and Morale patches. While it is designed specifically for the Novritsch Tactical Helmet, this helmet pouch should also fit most FAST High-cut helmet clones. The Novritsch Helmet Pouch for FAST High-cut Helmets adds a side of style to your helmet with loads of functional benefits!

If you're refurbishing an old helmet or need to replace some ageing padding, PTS has your back! The Comfort Pads for PTS MTEK FLUX Helmet mount to the internal Velcro inside FLUX and other helmets, allowing you to get the perfect fit on your noggin thanks to their modular design.

While designed specifically for the PTS MTEK FLUX Helmet, these pads should fit most other helmets with removable padding and internal Velcro, making them a great upgrade for extra comfort. Whether you seek replacement padding for hygiene reasons or your helmet slides around on your head as you run, the PTS Syndicate Comfort Pads for PTS MTEK FLUX Helmet are ideal!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!