M4 & AR-15 Variant Airsoft Assault Rifles

A MK18 Platform Airsoft Electric Gun with a strong and well-constructed external shell, including CNC Machined Billet Outer Barrel and Anodised CNC Machined Aluminium Handguard. The Gearbox contains a wealth of up-rated goodies such as a 6.01mm Inner Barrel and Reinforced Steel Gears, meaning it shoots just as good as it looks.

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for! It's more compact than the original SA-C25 with its PDW stock, perfect for staying versatile on the battlefield.

This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're all about full metal ARs with an ultra-modern exterior, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is one to watch! A revamped version of the original Platinum CM.097F, this version keeps the ultra-speedy pre-upgraded gearbox internals of the original and adds advanced functionality into the mix via the pre-installed EShooter Kestrel V2 Basic MOSFET/ETU.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

A pre-upgraded AR AEG for cutting corners tight up close, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is a solid choice for CQB players or those who appreciate a compact build with superb handling. With a trigger response which is hard to beat, compatibility with 11.1V LiPo batteries and high-speed internals refined with the addition of the Kestrel Basic ETU, this latest CM.097F is CYMA's gift to the CQB specialist or fast moving woodland warrior!

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

If you're looking for an affordable beginner platform with solid out-of-the-box performance and plenty of upgrade potential, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will suit you well! Made predominantly from high density polymer with an alloy outer barrel and steel trim parts, the SA-F01 FLEX™ is all about agility, tipping the scales at a mere 1.95KG, ideal for younger skirmishers and those who like to move fast!

Inside, the SA-F01 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F01, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. That's a lot of gun for not a lot of money!

Whether you're an experienced skirmisher seeking a lightweight backup or loaner AEG, or you're fresh to the sport looking for a future-proofed, reliable and versatile starter platform, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will serve you well!

If you're looking for an affordable beginner platform with solid out-of-the-box performance and plenty of upgrade potential, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will suit you well! Made predominantly from high density polymer with an alloy outer barrel and steel trim parts, the SA-F01 FLEX™ is all about agility, tipping the scales at a mere 1.95KG, ideal for younger skirmishers and those who like to move fast!

Inside, the SA-F01 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F01, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. That's a lot of gun for not a lot of money!

Whether you're an experienced skirmisher seeking a lightweight backup or loaner AEG, or you're fresh to the sport looking for a future-proofed, reliable and versatile starter platform, the Specna Arms SA-F01 FLEX™ M4/AR-15 Compact AEG; X-ASR MOSFET will serve you well!

An electric powered 6mm Airsoft M4 styled weapon that is majoritively made from high density Polymers to keep the weight down, and after a few hours of carrying around you'll be thanking them for it!

If you're into the Daniel Defense look but want something a bit different, check out the EMG Daniel Defense DDM4® V7 AEG! Based on the real steel DDM4 V7P, this M4/AR-15 AEG is rocking a unique folding stock adapter inspired by the real steel LAW Tactical folding stock, meaning it can fit into smaller gun bags and can cut corners tighter than other ARs, ideal for CQB!

Up front, we have a fantastic replica of the real steel DD MRF 9.0, a dynamic free-floated M-LOK handguard made from CNC aluminium and bristling with licenced Daniel Defense trademarks. The receiver also sports finely engraved DD markings and is equipped with the EMG Alpha 19 ergonomic grip, a comfortable grip design made from superb quality high density polymer. 

Inside, we have the APS Silver Edge II gearbox, a V2 gearbox equipped with 18:1 CNC steel gears, a polymer piston with a full steel tooth rack, a double O-ring cylinder head and stainless steel cylinder. The spring guide is a quick change example, allowing for easy power tuning, and the motor is a 24K high torque, meaning a snappy response rate and respectable rate of fire. Also inside is the APS Micro-FET, an in-line MOSFET designed to prevent trigger lockups and improve electrical efficiency, translating into even more speed downrange. 

Whether you have limited space, like folding things or want a licenced Daniel Defense AR AEG which no-one else has, the EMG Daniel Defense DDM4® V7 AEG should be in your sights! Well equipped both inside and out with a super unique folding stock no other AR has, the DDM4 V7 is the MK18's dynamic-looking, speedy brother!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like theDIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like theDIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

A full metal electric powered M4 based Airsoft gun with a four point RIS handguard, sliding stock and removable carry handle.

If you want to get into Airsoft skirmishing but don't know where to start, start here! The Delta Armory CHARLIE™ Full Starter Pack includes the DA-B04, a lightweight, pre-upgraded M4/AR-15 AEG with a sneaky style, two additional mid-cap magazines and everything else you need to get busy in game!

The set includes the DA-B04, 2 extra 120rnd Mid-caps, a Tactical Vest, a pair of NUPROL Battle Visor Full Seal Goggles, a NUPROL Tactical Half Face Mask, a speed loader, Delta 0.25g BBs, a Ni-MH battery, charger & a Battery charging bag; giving you everything you need to get off to a flying start on your Airsoft adventure. We recommend a Gun Bag or Hard Case to transport your pride and joy and some good footwear, but other than that, you are good to go!

If you value realism and need a compact AR platform which is built like and tank with top-tier performance, you're looking for a KRYTAC EMG BARRETT REC7 MK3 SBR AEG! The latest version of KRYTAC's stunning REC7 platform, the MK3 boasts the same ever-impressive externals as the original with further internal improvements to squeeze a bit more performance out of this already beastly build!

*Note that this platform is not provided with the optic shown in the example images

If you like an aggressive military-style AR, the CYMA CGS 14.5" M4A1 RAS SOPMOD GBBR should suit your needs. This full metal gas blowback rifle is based on the real steel M4A1 in SOPMOD Block 1 configuration, equipped with a CNC aluminium 20mm Picatinny quad rail patterned after the real steel KAC RAS. This is the perfect platform for a US Army impression!

Internally, this beast is based on the Tokyo Marui ZET system, giving you the best current option for GBBR internals with the widest aftermarket for upgrade parts. You won't need many upgrades though; with almost entirely steel trigger parts, a steel bolt carrier, a steel bolt catch and a 6.04mm tightbore inner barrel, the CGS M4A1 is probably the best out-of-the-box GBBR available currently!

If you like an aggressive military-style AR with real steal trademarks, the CYMA COLT CGS 14.5" M4A1 RAS SOPMOD GBBR should suit your needs. This full metal gas blowback rifle is based on the real steel M4A1 in SOPMOD Block 1 configuration, equipped with a CNC aluminium 20mm Picatinny quad rail patterned after the real steel KAC RAS. This is the perfect platform for a US Army impression!

Internally, this beast is based on the Tokyo Marui ZET system, giving you the best current option for GBBR internals with the widest aftermarket for upgrade parts. You won't need many upgrades though; with almost entirely steel trigger parts, a steel bolt carrier, a steel bolt catch and a 6.03mm tightbore inner barrel, the CGS M4A1 is probably the best out-of-the-box GBBR available currently!

Those looking for a lightweight backup weapon with fully fledged special forces style looks you can't do much better than the ST46 from S&T. This AEG is designed to look similar to a popular real world platform we all know and love, and that is widely issued to special forces of almost every nation in some form.

The ST46 is constructed almost entirely from high density polymer, making it a great choice for those with less physical strength or those who are a bit clumsy and may bump, scrape or drop their AEG. High density polymer may be less realistic, but it will not show damage as readily as a full metal gun might thanks to its dyed nature allowing it to maintain its looks far better than a painted or anodised finish.

On the inside the ST46 has an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. If you need a lightweight solution, either as a primary or a backup, the ST46 is the perfect thing!

The MK18 SA-E19 EDGE is an EDGE Series replica from Specna Arms, that comes included with a fully licensed Daniel Defense 20mm Rail System, as seen on the MK18, everyone's Special Forces AR of choice. Being an EDGE Series replica, it also comes packaged with the Gate X-ASR MOSFET, Quick Change Spring System, Rotary Hop Unit, 6.03mm Inner Barrel, Unique Serial Number and awesome Zinc Aluminium, Steel and Polymer externals.

If you're just getting started on your Airsoft journey and don't want to get in too deep straight away, the CYMA CM.517 M4 Combat Machine AEG is a fine choice. This battery-powered Airsoft AEG is constructed almost entirely from high-density ABS polymer with an alloy outer barrel and alloy version 2 gearbox, keeping the build lightweight and agile, not to mention cost-effective. While it weighs practically nothing (only 1.7kg!), the CM.517 doesn't feel flimsy thanks to its use of high-density ABS polymer. Inside we are treated to surprisingly well-equipped internals, offering respectable performance in both outdoor and indoor skirmishes.

The alloy version 2 gearbox the CM.517 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.517 is absolutely mission-ready, equipped with a 20mm Picatinny quad rail handguard and 20mm railed receiver, ready for any 20mm Picatinny accessories you need, from red dot sights and scopes to vertical foregrips, laser aiming modules and tactical flashlights. The alloy outer barrel is rocking 14mm CCW male threads, meaning you can add a tracer unit to make your BBs glow or a suppressor for sneaky styling. If you're ready to get into the sport with an affordable, reliable and competitive platform for a great price, the CYMA CM.517 M4 Combat Machine AEG is a fantastic choice!

Designed to give new players everything they need to compete on the field in a lightweight, affordable package, the Nuprol Pioneer Defender AEG has established a reputation for being one of the best options for a newcomer to the sport. Out of the box, the Defender is very well equipped; boasting a 6.03 tight bore inner barrel for accuracy, a microswitch trigger for impressive trigger response, and a high torque motor to keep the reinforced gearbox running smoothly and quickly with superb long term reliability. 

Once you have got your eye in and get more of a taste for the sport, the Defender can be customized into practically whatever AR15 variant you like, sporting full compatibility with AEG aftermarket external upgrades. A perfect choice for the new Airsofter who wants to get out and shoot, but doesn't want any surprises or regrets down the line!

If you're looking to get into the sport and get skirmishing on the cheap, the CYMA CM.515 AR-15 Carbine AEG is a fantastic option with uniquely modern styling! With nifty features such as KeyMod Style handguard with pre-installed 20mm Picatinny rail sections and 20mm Picatinny receiver rail ready for your choice of optical sight, the CM.515 takes commonly available and cheap M4 AEG magazines and is already equipped with a 6.03mm tightbore inner barrel for extra accuracy. Hard to believe at this price, right? Well, you better start believing in cheap M4s with tightbore inner barrels, you're looking at one!

The alloy version 2 gearbox the CM.515 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms when paired with the pre-upgraded 6.03mm tightbore inner barrel. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

This is the perfect AEG for any player looking to start their Airsoft journey with a budget-friendly AEG rifle that has no trouble competing either in CQB or in the wide spaces of outdoor sites. The widely supported and ever-popular M4 platform ensures plenty of room for aftermarket external upgrades to customise your CM.515 and make it truly yours. Whether this is your first foray into the world of Airsoft or you are looking for a cheap project gun, we are sure you will be impressed with your CYMA CM.515 AR-15 Carbine AEG!

If you are looking for an Airsoft starter kit with everything you need to get skirmishing included, you have found it! The Delta Pioneer Starter Bundle includes the impressive NUPROL Delta Pioneer Defender AEG, an M4/AR15 platform made from robust high density polymer with a rock solid metal V2 gearbox and a 6.03mm tightbore inner barrel, giving you a lightweight and strong starter platform with little to go wrong and superb performance out on the field. The Defender in this package is in VCRA compliant Pre Two-Tone blue, making it ideal for those who don't have their UKARA membership yet. Being a Pre Two-Tone means you can order today and have your AEG by tomorrow, avoiding the waiting time for our two tone service!

The Defender is packaged with a 9.6v 1600mAh Ni-MH Battery and Charger, giving you a reliable power source and all the performance you could want!

Also included with the set is a bag of Delta Armory's 0.25g BBs which are the go-to weight for most Airsoft skirmishers, offering superb wind resistance for shooting outdoors with enough projectile speed to give the enemy nowhere to run! Delta Armory BBs are widely regarded as some of the best out there, and are a staff favourite with their highly polished surface providing excellent accuracy and their ultra-tight tolerances which minimise the chances of a jam.

This bundle includes everything you will need to get stuck in and get off to a flying start on your Airsoft adventure; the only thing left to buy is your choice of eye protection!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed.

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

A new electric 6mm airsoft rifle made by NUPROL as a budget entry level RIF but without compromising on quality, and is constructed from polymer this weapon is light weight but tough enough to handle the rigors of an airsoft skirmish. The gun is available in a variety of colours allowing you to pick the perfect gun to match your kit.

The gun features plenty of rail space for attaching aftermarket external parts for customisation, with plenty of options for upgrades available this gun simply cannot be ignored.