All External Airsoft Parts & Attachments

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

The moment all AK users have been waiting for; a high quality PBS-4 Suppressor replica made from Alloy with both a 14mm CCW and 22mm CW thread.

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

If you're running your AAP-01 or AAP-01C as a primary, the Action Army Folding Stock Kit for AAP-01 GBB Pistols provides an extra point of contact for improved accuracy and range and looks fantastic as a bonus! This sleek, minimalist folding stock kit is compatible with the AAP-01 and AAP-01C from Action Army, mounting via the hammer housing pin & rear sight. 

The stock offers length of pull adjustment, an adjustable cheek riser and side folding functionality, making it the equivalent of a SCAR or ACR stock but with a far more compact design well suited to the lightening fast AAP-01. Also moulded as part of the stock base we have a 20mm Picatinny optics rail, allowing you to mount a red dot sight or scope to your AAP to enhance its functionality as a primary. 

Steel QD sling sockets are present on either side of the toe of the stock, along with an additional socket beneath the stock mount, ideally placed for single-point slings. If you love the way your AAP-01 shoots but want to extend your effective range and turn it into a mean little carbine, the Action Army Folding Stock Kit for AAP-01 GBB Pistols is what you need to get the job done!

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!

If you want to turn your local CQB site into a nightclub while you send rainbows of death at the enemy team the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns is what you need! This device can be used as a standard tracer unit, a tracer with a muzzle flash effect with 7 different colours to choose from, and of course, in the rainbow flash mode which lights up the first meter or so of the BB's trajectory with a dazzling rainbow effect. Just wait until you see this thing in action, it is positively EPIC!

This is the latest generation of the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns, meaning it works a little differently than the original model. The activation button is now on the front, and the tracer collar includes relief cuts to allow for shotguns with full-length magazine tubes and iron sights mounted directly to the barrel.

This device is intended for use with tri-shot Airsoft shotguns but comes with a 14mm CCW thread adapter and an adapter for 16mm unthreaded barrels. The default mounting mechanism is compatible with unthreaded shotgun/sniper rifle outer barrels of between 19mm and 24mm outer diameter, giving you an unprecedented amount of flexibility all in a single unit. If you want the enemy team to taste the rainbow, the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns is what you need!

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! 

This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. 

To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

A highly useful and well-constructed 45 degree rail piece for 20mm rails, useful for getting your accessories in just the right place for you.

An Alloy constructed mount for the M14/M1A platform, which secures above the ejection port via the threads on the side of the receiver and allows you to mount 20mm compatible accessories/sights.

If you need more battery space but want to keep your M4/AR-15 AEG slim on the sides, the CYMA Adjustable Whale Stock is just the thing. This sliding stock is designed for M4/AR-15 buffer tubes and offers a fantastic alternative to common Crane stocks used for rear-wired AEG setups. 

The advantage of the Whale Stock over the Crane is its slim profile, avoiding the side bulges of the Crane stock in favour of a larger stock "toe" for battery storage. This means you can use a much larger battery than would fit in a buffer tube but still enjoy the slim, snag-free profile of more slimline AR stocks. 

The Whale Stock also features a QD sling socket on each side, ready for a QD sling swivel, along with a conventional sling loop at the toe of the stock for hook or strap-style slings. If you want a new look for your buffer tube-equipped AR AEG but refuse to surrender your massive battery, the Whale Stock is what you need!

Keep your WADSN flashlights safe from stray BBs with the WADSN Flashlight Protector. This polymer protector will save the glass lens from shattering under the impact of a BB. It comes in multiple sizes that match the diameter of the different WADSN flashlight lines. Each package includes a clear, translucent diffuser and an IR protective lens, so you can use the best protective lens for your play style.

If you like to dazzle foes, the clear lens is certainly for you. If you are a sneaky player instead and like to operate in pitch black, relying on your night vision setup, then the IR protective lens is the one for you. Save yourself the upset of a broken flashlight and increase its situational versatility with a WADSN Flashlight Protector.

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

Whether you want to give your AEG a more elite look or you need space for a battery the Big Dragon AN/PEQ-15 Dummy Battery Box will do the trick! This dummy PEQ-15 unit is designed to look exactly like the real thing and has enough space inside to fit a battery measuring approximately 6.5x4.5cm. Included in the set is a set of realistic laser warning stickers for a more realistic look, with various colour schemes available so you can pick your favourite. This battery box mounts to 20mm Picatinny rails and is great for a front-wired AEG setup with limited space inside the handguard.

If you want a red dot sight on your AKS-74U but aren't a fan of the Russian side rail, 5KU has what you need! The 20mm Rear Sight Rail for AKS-74U AEG/GBBR is designed to mount over the rear iron sight of AKS-74U rifles, both the AEG and GBBR variety, providing a length of 20mm Picatinny rail measuring 8cm approximately.

The part is constructed from aluminium to provide a great balance of strength and low weight and should fit most AKS-74U Airsoft guns on the market, though some may require slight modification. If you want to mount a red dot sight for faster target acquisition but still want to be able to fold your stock for tight quarters, the 5KU 20mm Rear Sight Rail for AKS-74U AEG/GBBR is the key!

Looking for a way to mount a red dot or telescopic sight to your AKS-74U? The 20mm Railed Top Cover from CYMA is designed for the CM.045 series of AKS-74U AEG rifles and provides a 20mm Picatinny rail which runs the length of the steel top cover, allowing any sighting system which mounts to 20mm rails to be fitted. This top cover will not fit standard AK rifles and is designed for the CM.045 AKS-74U series.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

If you're working on a low-cost, low-weight build, the Delta Armory Polymer 20mm Picatinny RAS for M4/AR-15 Delta Rings is a fine choice. Priced at less than a Big Mac meal but packaged with a pair of rail covers, this handguard is constructed from high density polymer, tipping the scales at a mere 180g!

Like the real KAC RAS it is based on, the Delta Armory RAS boasts 20mm Picatinny rails at 3, 6, 9 and 12 o'clock and is a two-part design with a separate upper and lower handguard. This means that once installed you can remove the lower handguard without tools, either for a battery change or to mount an M203 launcher. The included rail covers are designed to protect your hands and keep your rails crisp and in-spec but can be removed by holding the metal tab at the end down and sliding them off. 

Compatibility-wise, this handguard is designed to be paired with a Delta Ring and Handguard Cap so can easily be installed on M4A1, CQBR, XM177 and other classic M4/AR-15 configurations with the same procedure as the original ribbed handguards.

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

If you're seeking a lightweight handguard for your sleeper build, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 is a fine choice. This handguard is styled after the real steel URX 3 handguard and is constructed from high-density polymer, keeping the price and weight to a minimum.

Known as a "mock KeyMod" handguard, the attachment slots on this handguard are not compatible with most KeyMod accessories though you do have the option of mounting 20mm Picatinny accessories to the included rail sections. 3 Rail sections are included and pre-installed but can be repositioned wherever you need them on the attachment slots at 3, 6 and 9 o'clock.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you want the style of a modern KeyMod handguard but not the weight, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 should fit the bill!