Airsoft Magazines

If you are running the Well WE23-Mini you will probably want a couple of these on hand to keep up with its intense rate of fire! The WELL PRO 600rnd Magazine for WE23-MINI Minigun holds 600 BBs and winds itself via the internal motor of the Minigun itself, meaning no need to do anything but pull the trigger!

The magazine indexes at the rear and rocks in to lock at the front, similarly to an AK or FAL platform but backwards. The magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag,  reinstall the rear plate and you are ready to shoot!

Many people convert their Hi-Capa pistols to HPA to reach a BB capacity close to this, well, don't they look silly now! This WE 350rnd Green Gas Drum Magazine allows you to fire 350rnds without being interrupted by having to swap magazines. No HPA modifications are needed, just a big old drum mag! It is designed for WE Hi-Capa pistols but may work with others, though compatibility cannot be guaranteed.

The magazine is constructed with a hefty alloy gas reservoir with a high-density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you want to run a pistol only this will provide you with more than enough firepower!

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design with a sound control mode, which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

Looking to feed your AR-15/M4? Here is what you need. An essential for any modern styled AR-15. Made from strong high density polymer this mag should survive a drop or two, though we don't recommend it! This even includes a clip on dust cover, similar to the real world Plastic-mag, helping keep your magazine dust free and in good working order even when stored for some time!

Ever heard of the MG36? Potentially not, as this support weapon version of the AR36 never made it past the prototype stage, though the elite German KSK has been sighted running a similar setup in the early 2000s in Afghanistan. The NUPROL 1200rnd Electric drum magazine allows you to add some serious MG36 like firepower to your AR36 platform AEG, and transform it to provide supporting fire for the team. This drum magazine is constructed from high-density polymer with a modern design aesthetic, fitting in perfectly with the all polymer, highly modern AR36 platform. This magazine is an autowinding design with sound control, which requires 3x AAA batteries to operate. 

If you are looking for a second box magazine for longer operations or just because you have trigger-happy tendencies, Battleaxe is here to sort you out! The Battleaxe 2000rnd Box Magazine for T8 MK46 LMG - Sound Control is designed ONLY for the A&K FN MK46 MOD 0 T8 LMG AEG. The fill window of this beast of a magazine can be found at the top on a hinge making it easy to pour entire bottles of BBs in!

The magazine itself is constructed from polymer with a fabric cover, the feed tubes coil up from the box and are made from steel, guaranteeing strength. This magazine boasts both sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding automatically when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!

Unzip the fabric cover and you will find at the bottom of the magazine there is a switch with three settings and the battery compartment. The central position is the "off" position, pushing the switch into its named position activates either the sound control or "auto-winding" mode respectively. The battery compartment lid comes off and reveals space for a 9V battery, this is crucial for the magazine to function

If you need more firepower for your WE Galaxy EU series or optics-ready Armorer Works VX7/9, this will do the trick! The Armorer Works 350rnd Gas Drum Magazine for WE Galaxy EU Series boasts a whopping capacity of 350 BBs, loaded through the fill window on the left side of the mag body. Simply slide the door open and pour your BBs in, just like an AEG high-cap.

The winding wheel is on the front, easily accessed when wearing gloves and very fast to wind; a significant step up from comparable winding wheels and "flash mag" style setups which can be a hassle to use under pressure. Once your BBs are loaded, wind the wheel until the noise changes and you're ready to give 'em hell!

The fill valve is located on the baseplate, requiring the mag to be inverted to fill with gas. Boasting a gas reservoir just as massive as its BB capacity, this drum mag will handle rapid-fire far more effectively than standard or even extended mags, ideal for those who run their pistol as a primary. Compatibility-wise, this mag is only for the WE Galaxy EU series, WE EU-series MOS and Armorer Works VX7/9 optics-ready versions and won't work with standard EU series pistols.

With 350 BBs on tap with plenty of gas to get them on target, the Armorer Works 350rnd Gas Drum Magazine for WE Galaxy EU Series is the perfect addition for any pistol user that hates reloading and loves dumping rounds downrange!

If you're rocking the stunning EMG Noveske "Space Invader" AEG, here's what you need to keep it well-fed! The EMG 210rnd Hi-Cap Magazine for Noveske "Space Invader" AEG is constructed with a steel shell and polymer internals, holding 210 BBs approximately. 

The mag can be filled through the fill window on top by opening the hatch and pouring your BBs in. With this done, wind the winding wheel on the baseplate 5-10 times or until the noise changes and you're ready to rock! Compatibility-wise, this mag is specifically for the EMG Noveske "Space Invader" AEG (OEM: APS) and is unlikely to work with other platforms. If your Space Invader is hungry for more firepower, grab a couple of these to keep it happy!

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

A 600rnd High Capacity Magazine for the BOLT BR-47 series, that is filled by pouring BBs through the top Fill Window, and wound via the Clockwork Winding Wheel on the base. The Magazine closely matches a popular model for modern AK enthusiasts. If you want to stay in the game for longer, then stock up on Spare Magazines today.

If you're running the ICS TOD aka IDF Defender, load up on these magazines! The 400rnd Steel High-Cap Mag for ICS TOD/IDF Defender AEG offers realistic stamped steel construction for a realistically hefty feel, the perfect pairing for the highly realistic ICS IDF Defender. 

Like other wheel-wound Airsoft high-cap magazines, this mag is filled through the fill window on the top of the mag body by opening the hatch and pouring BBs straight in. With this done, close the hatch, wind the winding wheel on the baseplate 5-10 times or until the magazine is properly tensioned (listen out for the clicking noise made by the winding wheel changing) and you are ready to rock. If feeding ceases, wind the wheel again to get it feeding once again. If you're rocking the ICS IDF Defender, these are the mags you need!

If you desire to dump 350 BBs without the added effort of swapping magazines but don't want to mess with a HPA setup then this is your chance! This WE 350rnd Green Gas Drum Magazine is designed for WE 1911 pistols but may work with others, though compatibility cannot be guaranteed.

The magazine is constructed with a hefty alloy gas reservoir with a high-density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you want to run a pistol only this will provide you with more than enough firepower!

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.

If you're looking for SAIGA-12 mags for your Double Bell SAIGA-12 AEG or want to give your AK a different look, the Double Bell 300rd Hi-Cap Magazine for SAIGA-12K AEG is what you need. This polymer high-capacity magazine holds approximately 300 BBs and is filled through the fill window at the top of the magazine body. Simply pop the fill window door open, pour your BBs in, wind the winding wheel on the baseplate 5-10 times or until the noise changes and you're good to go!

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals. 

A High Capacity Magazine for the Tokyo Marui Scorpion Mod.M Submachine Gun, that holds a total of 260rnds and is wound from the bottom of the Magazine as per any standard High Cap. To fill the Magazine, simply open the Fill Window at the top/front of the mag and pour your BBs in. Wind the clockwork wheel on the base of the mag to start feeding BBs into your gun.

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 300 BBs so you don't have to carry as many to stay in the fight for longer. The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves.

It is loaded at the top of the mag using the fill window and being a high cap design means that you will need to rotate the wheel to load BBs onto the spring. Make sure it is completely empty after use to avoid wear and tear on the internal mechanisms of the magazine.

Please note that these mags are specifically for CYMA Airsoft AEGs.

Every good sniper needs good mags. If you're one of the lucky few that wield the Barrett M98B M-RAD, you'll need the round to maximum picking targets off from afar.

This magazine from Snow Wolf has a 280 round capacity with a high cap design, meaning you can pop this mag in and fire for a huge period of time without the need to switch mags.

With a lightweight polymer design, the mag also helps keep your huge rifle's weight down.

Shooting 350 BBs at a target without the added effort of swapping magazines sounds nice right, but usually that comes with the pain and price tag of setting up HPA build, well not anymore! This WE 350rnd Green Gas Drum Magazine allows you to do just that, let off 350rnds without being interrupted by having to swap magazines. It is designed for WE B92 pistols but may work with others, though compatibility cannot be guaranteed.

The magazine is constructed with a hefty alloy gas reservoir with a high-density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you want to run a pistol only this will provide you with more than enough firepower!

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top.

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top.

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you need more capacity but don't want to carry 10 mags, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs will keep you sweet! This wheel-wound high-capacity magazine holds 300 BBs and replicates the real steel NATO STANAG 30rnd mag with its stamped steel shell. Compatibility-wise, this mag should fit in the vast majority of M4/AR-15, SCAR-L and L85/SA80 AEGs. 

Like other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, pull open the hatch, then pour your BBs in. With this done, wind the winding wheel on the baseplate to tension the mag and you're ready to rock. If you need more capacity but don't want to compromise agility with a rig full of magazines, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs is what you need!

If you need more capacity but don't want to carry 10 mags, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs will keep you sweet! This wheel-wound high-capacity magazine holds 300 BBs and replicates the real steel NATO STANAG 30rnd mag with its stamped steel shell. Compatibility-wise, this mag should fit in the vast majority of M4/AR-15, SCAR-L and L85/SA80 AEGs. 

Like other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, pull open the hatch, then pour your BBs in. With this done, wind the winding wheel on the baseplate to tension the mag and you're ready to rock. If you need more capacity but don't want to compromise agility with a rig full of magazines, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs is what you need!

Looking for an interesting mag for your M4? The Battleaxe 450rnd Polymer Magazine for M4/AR-15 AEGs is designed for the M4/AR15 AEG but should work in most compatible platforms, and is based on the extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel-wound high-cap design with its winding wheel located on the baseplate and it is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex-style texture to provide extra grip when pulling the magazine from a pouch or reloading. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG loadout with a cutting-edge, modern look! 

Looking for an interesting mag for your M4? The Battleaxe 450rnd Polymer Magazine for M4/AR-15 AEGs is designed for the M4/AR15 AEG but should work in most compatible platforms, and is based on the extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel-wound high-cap design with its winding wheel located on the baseplate and it is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex-style texture to provide extra grip when pulling the magazine from a pouch or reloading. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG loadout with a cutting-edge, modern look! 

The perfect magazine to give you the ultimate fire-power and suppression from your G&G AP-9 AEG. Incredibly satisfying to hold and use thanks to the very thick and robust polymer construction.