Airsoft Magazines

This is a 15rnd Short Magazine for the Tokyo Marui TMPSG-1 Sniper Rifle (electric). It is a compact magazine which makes prone shots much easier, and reduces the chance of magazines snagging on your equipment. It is loaded from the top using a Speedloader and is very easy to carry thanks to its' highly compact design.

A spare or replacement magazine for the Cyber Gun PGM .338 Bolt action Snipers rifle. This magazine has an authentic steel shell, and a mix of polymer and alloy internal parts. The magazine holds 19 rounds and has a large gas reservoir, enabling it to be filled multiple times with BBs before the propellant runs out.

If you're in search of some extra magazines for your WELL PRO WE09 AK-12K, this is exactly what you need! These magazines are designed specifically for the WELL PRO gas AK series. They are constructed with a strong polymer shell holding the alloy internals and steel spring. These materials are guaranteed to resist the rough conditions of any skirmish.

This magazine holds a whopping 38 BBs, a larger amount than the usual 30-round capacity of other gas magazines. The BBs are loaded through the top, just like other gas magazines. To fill the magazine with gas, you can find the fill valve on the rear of the magazine near the top.

This magazine inserts just like any classic AK magazine would, with the rock and lock method. This means you have to insert the front section of your mag first, then "rock" your magazine back to "lock" it in place in your AK rifle. If you need a high-quality magazine for your WELL PRO WE09 AK-12K, this is the best choice for you!

If you run the A&K M1 Garand you will need a few of these! The 30rnd Low-cap Magazine for A&K M1 Garand AEG from A&K is designed for...you guessed it, the A&K M1 Garand. Each magazine holds 30 BBs and can be filled from the top using a speed loader or loading tool. The magazine is constructed with a polymer shell, steel feed spring and an alloy baseplate which is realistically designed to mimic the real Garand's built-in magazine and clip system.

If you need some additional magazines for your Ares Otto Repa SOC SLR Sniper Rifle, look no further! The Ares 40rnd Low-Cap Magazine for SOC Sniper Rifle AEG is designed specifically for this platform, it is constructed from high-density polymer and holds 40 BBs. This might seem like a low capacity but the SOC AEG is a sniper/DMR-type platform and 40rnds will be all you need to get the job done.

The magazine inserts via the "rock and lock" method, requiring that you index the front of the magazine into the well first and rotate the rear up to lock. It features ridged grooves on the sides to aid in gripping, with or without gloves. The magazine is loaded at the top of the mag using a speed loader, its low-cap design means there is no battle rattle when hiding in the bushes!

Looking for a spare mag for your STTI ST8 NBB Airsoft pistol? You've found what you need, right here! This magazine is designed for the STTI ST8 and is constructed with a polymer shell, alloy gas reservoir, a steel feed spring and brass valves. The magazine can be loaded through the fill/feed port at the top front of the magazine body and is filled with gas through the fill valve on the baseplate. As an alternative to filling with a speed loader you also have the option of pulling down the magazine follower, found on the left side of the mag and filling by hand.

If you are looking for spare magazines for your officially licensed SIG AIR pistol? You have found it! This magazine is a replacement original magazine with a 20 round capacity. The magazine can be filled using a speed loader through the feed lips or the fill window at the bottom of the front face of the magazine when the magazine feed spring has been pulled down. The inlet valve can be found at the centre of the baseplate. The magazine has an enhanced baseplate, with an extension to ensure your pistol doesn't slip out of your hands. If you are a CQB player, you'll need at least a few of these!

If you've bagged yourself a bargain backup pistol, perhaps a spare magazine would make it a bit more useful! Introducing the LS B84 Gas magazine, a spare original magazine for the LS B84 NBB pistol. The magazine holds 15 rounds and can be loaded using a speed loader or by hand, through the fill/feed port on the front of the magazine. The gas fill valve is located on the magazine base and this magazine is compatible with green gas, ASG Ultrair, and summer gas.

If you plan on taking your WE Pistole 38 GBB Pistol out on the skirmish field but you feel like one 14rnd magazine is nowhere near enough ammo for you, then you need the WE 14rnd Gas Magazine for P38 Pistol! This magazine is the same as the one that comes with the pistol, so there will be no concerns with compatibility.

It holds 14 BBs and is filled using a speedloader on the feed lips at the top of the magazine. This is a low-capacity but is still 6 ammunition more than the real steel pistol. Its alloy shell protects the polymer internals and gas chamber, which can be filled at the bottom of the magazine in the gas valve.

Pick up some spare magazines for your P38 pistol and take it with you to your next skirmish, or pick up a couple of mags for some test firing in the garden!

Suppose you're looking for some extra magazines for your WE gas blowback AK platforms, if so, then this WE 30rnd Gas Magazine is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it robust and reliable, perfect for the battlefield. The magazine features a slick black design that matches most AK platforms perfectly.

The magazine holds up to 30 rounds, and features Polymer feed lips, which is also the BB fill location using an Airsoft speedloader. The magazine gas fill valve is found on the bottom of the magazine. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to "lock" it in place in your AK rifle.

If you want a high-quality magazine that will never let you or your WE gas blowback AK down, the WE 30rnd Gas Magazine for WE AK GBBRs is certainly the choice for you!

Looking for spare magazines for the VORSK VMP-1 or VMP-2? You have found them! The VORSK 45rnd Magazine for VMP GBB Series is constructed from alloy with a steel feed spring and brass valves, holding 45 BBs which can be loaded either by hand through the feed lips at the top or using a speed loader. Please note, these magazines do not include the polymer magazine sleeve supplied with the original magazine included with the VMP-1 and VMP-2 but these are available separately. 

Ideal for VMP-1 or VMP-2 users who need maximum capacity, this magazine is also compatible with ASG MP9 and KWA TP9 replicas. If you're gearing up to run the VMP-1 or any VMP-2 variant, these magazines are essential!

A magazine for the ASG M4A3 SportsLine 6mm BB Gun and stores up to 27 BBs at a time.

A pack of Shotgun Shells designed for Airsoft 6mm Pump Action Shotguns which accept Standard Shotgun Shells. The shells are easily loaded from the top, by using an Airsoft Speed Loader, by simply pushing the nozzle into the Shell's top hole and filling. These shells are a must have purchase for any Airsoft Skirmisher who has a pump action Shotgun, as it allows you to play for longer without having to stop to reload magazines.

A gas blowback Airsoft magazine developed by VORSK for their G-Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine holds up to 23 rounds and is a direct replacement for the magazine which comes with the pistol, and is filled with BBs from the top or front, and is filled with gas from the bottom once the base plate has been slid to the front. 

If you're looking to bolster your VORSK G-Series pistol magazine with 100% compatible magazines then this is the way to go. 

If you need spare magazines for your Novritsch SSG10 you have found them! The 28rnd Transparent Magazine For SSG10/VSR10 Sniper Rifle is constructed from transparent polymer to allow you to keep track of your remaining ammo without having to remove the magazine mid firefight! Once again, Novritsch hits the nail on the head; being able to check your capacity by inverting your rifle means you will never be caught dryfiring at a critical moment.

The mag holds 28 BBs and can be loaded through the fill/feed port at the top front of the mag using a speed loader or loading rod. Compatibility-wise, this magazine is ideal for the Novritsch SSG10 sniper rifle but should also work in other VSR10-based designs such as the JG BAR10, Tokyo Marui VSR10 variants and the CYMA CM.701. Lock and load with the added assurance that you will never take aim, steady your breathing and press the trigger only to send a big fat nothing downrange!

If you're opposed to reloads and prefer shooting, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 from Army Armament belongs on your 'Capa. This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones.

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Hi-Capa Magazine for R501/R603/R604 should be a welcome addition to your kit list!

If you are looking for magazines for your Double Eagle or Tokyo Marui MWS GBBR; you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR, but should work with original Tokyo Marui M4 MWS System GBBRs too - unlike other Double Eagle gas magazines.

The mag is constructed with a durable alloy shell and internals. It is loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is at the bottom of the magazine, on the baseplate, and the mag is compatible with both green gas and red gas.

It holds 35 BBs, making it perfect for those who seek realism. As with the original TM and Double Eagle GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, further adding to the realism of the Double Eagle Noveske N4 MWS ZET System GBBR!

If you're lucky enough to own a Novritsch SSP1 or SSP5 GBB pistol, load up on these! The Novritsch 29rnd Green Gas Magazine for SSP1/SSP5 GBB is constructed from alloy with a polymer baseplate, brass valves and rubber O-rings. Compatible with most Hi-capa 5.1 GBB pistols but made especially for the SSP1 and SSP5 pistols from Novritsch. 

Filling the mag with gas is as simple as sliding the baseplate off and inverting the mag to fill, as you would with other green gas magazines. Loading the BBs can be done through the feed lips with a speed loader equipped with a GBB adapter but you can also pull the follower down and load through the widened section at the bottom. If you want to maximise your kill potential, load up on mags!

If you have ever spotted a vulnerable target, raised your Airsoft sniper rifle and gently squeezed the trigger and had nothing come out, you will understand the need for a way to monitor your ammo levels when sniping on the Airsoft field. Maple Leaf have the answer to our prayers, right here! The Transparent Magazine for the VSR-10 is constructed from a transparent polymer, allowing you to verify that your magazine is fully loaded before putting it into your mag pouch, and also allows you to quickly check how many BBs you have remaining through the clear witness window on the magazine's base. Never shoot blanks again with this mag!

A spare or replacement magazine for Raven's R9 GBB pistol. This magazine is constructed from alloy with a steel feed spring, polymer feed lips and brass valves. The magazine holds approximately 25 rounds and can be loaded either with a speed loader or by hand through the feed lips at the top, or the feed channel in the front. This magazine is suitable for summer gas, maintenance gas and green gas.

If you want to keep your Desert Eagle running when the cold sets in a CO2 mag is the only way to do it. The 27rnd CO2 Magazine for WE/Armourer Works Desert Eagle GBB Pistol is constructed from alloy with polymer feed lips, a brass knocker valve and rubber gas route bucking. This CO2 mag is designed for the WE/Armourer Works Desert Eagle GBB pistol and will not work in the KWC full auto version.

The magazine can be loaded through the feed lips at the top of the design and due to the lack of an external follower, a speedloader with a GBB adapter is recommended for ease of loading. The mag takes 12g unthreaded CO2 capsules and a single capsule can be inserted from the left side of the magazine and tightened via the Allen screw on the baseplate. As always, this magazine will require lubrication to maintain its health in the long term, and we recommend applying some Silicone Dropper Oil to the top of each CO2 bulb before inserting it. Keep your mighty Desert Eagle in the fight all winter with this CO2 magazine!

A pack of Shotgun Shells designed for Airsoft 6mm Pump Action Shotguns which accept Standard Shotgun Shells. 

The shells are easily loaded from the top, by using an Airsoft Speed Loader, by simply pushing the nozzle into the Shell's top hole and filling. These shells are a must have purchase for any Airsoft Skirmisher who has a pump action Shotgun, as it allows you to play for longer without having to stop to reload magazines.

If you need more mags for your Novritsch SSG96, you've found them! The Novritsch 22rnd Magazine for SSG96 Sniper Rifle is constructed from translucent polymer so you can keep track of your round count and is compatible with both the Novritsch SSG96 MK1 and MK2. The mag can be loaded through the feed lips either by hand or with a speed loader and holds 22 BBs; more than enough for such an accurate platform!

A spare magazine for WE Europe 1911 Airsoft pistols. The magazine is constructed entirely from Alloy, with the only Polymer parts being the feed lips and follower.

The Cybergun 35rnd Magazine For Desert Eagle .50AE AEP is exactly what you need to keep your CM.121 or CM.121S in the fight for longer. This unique magazine is designed exclusively for Desert Eagle AEPs and is not compatible with other pistols. It has a capacity of 35 BBs which is useful considering the full auto capabilities of the Cyma Desert Eagles. To load the BBs you can pull the spring downwards and insert BBs directly into the feed lips using a speedloader.

A spare/replacement magazine for your WELL MB02/ MB03/MB07/MB09/MB10/MB11/MB12 sniper rifle. The magazine holds 28 rounds and can be filled via the feed lips on the top of the magazine either manually or with a speedloader.

A replacement magazine for the CM.125 AEP Electric Pistol which is designed to fit into the pistol and be used to carry extra rounds into the game meaning you don't have to stop mid game to use a fiddly speed loader.

The Novritsch 32rnd Gen.3 Gas Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas which is refilled at the bottom. The BBs are loaded into the magazine by pulling down the spring tab and filling the BB chamber with a speedloader. This mag has a 1-stage valve and a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 32rnd Gen.3 Gas Magazine for SSX23/303 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

A Spare Gas Blowback Magazine for any generation of the WE F226 range. 

Need some big mags for your big handgun? The Cybergun Desert Eagle green gas magazine should do the trick! This magazine is designed for the Cyber Gun Airsoft Desert Eagle L6 GBB and holds approximately 27 BBs which can be loaded using a speed loader through the feed lips at the top of the magazine. This magazine is a green gas magazine and can be filled through the fill valve on the magazine's baseplate, and can also take summer gas to keep the FPS down to reasonable levels on hot days. The magazine is constructed from alloy with polymer feed lips, with a steel feed spring and brass valves, and has realistic mock witness holes on each side, matching the cut-outs in the real Desert Eagle magazine used for gauging how many rounds are left.