Airsoft Magazines

An Alloy constructed 23rnd magazine for the Vorsk Vengeance Hi-Capa Gas Blowback Pistol.

Buy a triple pack and save some money in the meantime! The latest PTS Enhanced Polymer Magazine that allows you to switch from a 30rnd to 120rnd capacity within a split second from the underside of the magazine! The most robust magazine on the market, a must for anyone seeking realism and reliability.

A spare or replacement magazines for SR25 or AR10 rifles which use the Classic Army/A&K style of magazine. This mag is filled via a speedloader through the feed port at the top of the mag. Perfect for the designated marksman who likes to challenge themselves with low/real capacity!

If you want to keep your beast of a Novritsch pistol shooting perfectly in cold weather, you'll need one of these! The Novritsch 31rnd CO2 Magazine for SSP1/SSP5 GBB Pistol is constructed from alloy with a polymer baseplate and is compatible with both the SSP1 and SSP5 GBB pistols.

The mag is loaded either through the feed lips or the follower channel when the follower is held down using a speed loader or loading tool. If you're new to CO2, we recommend giving our CO2 guide a quick read so you can stay abreast of maintenance and CO2-specific safety issues.

This mag uses 12g unthreaded CO2 capsules, one of which needs to be installed inside the magazine shell. To access the CO2 compartment, simply press the small button on the bottom and slide the baseplate off. Underneath, you will find the CO2 plug which can be removed with the included Allen key or a flat tool if you don't have the Allen key handy. Install your CO2 capsule inside, tighten the plug down until you hear the capsule pierce and replace the baseplate; you are now good to go!

If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!

Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

Suppose you're looking for some extra magazines for your gas blowback AK platforms, if so, then the GHK 40rnd Magazine for AK74 GBBRs is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it very robust and reliable, sure to survive even the most intense of skirmishes. The magazine features a slick black design that matches most AK platforms perfectly.

The magazine holds up to 40 rounds, and features Polymer feed lips, which are also the fill location using an Airsoft speedloader. The magazine gas fill valve is found at the rear using any Airsoft green gas. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to lock it in place in your AK rifle.

If you want a high-quality magazine that will never let you or your gas blowback AK down, the GHK 40rnd Magazine for AK74 GBBRs is certainly the choice for you!

If you are rocking an M24 or M40A5 sniper rifle from Delta Armory then you should check this out! This magazine is designed for these platforms; it is constructed from high-density polymer and holds 28 BBs. This may not sound like a lot, but remember that's racking the bolt 28 times, tiring!

Sniping is already difficult; that's why it's important to ensure you have plenty of spare mags so you don't have to give up your sneaky position. Get a couple of these magazines and you'll be ready to skirmish all day!

If you're rocking the Umarex/GHK Glock 17 MOS or Glock 45 MOS GBB pistol, these are the mags you need! The Umarex 20rnd Magazine for GHK Glock 17/45 Gen5 MOS GBB is officially licenced by Glock Ges.m.b.H and includes Glock markings on the baseplate to complete the look. 

A more realistic design than your usual Glock mag, this magazine doesn't have a follower channel on the front, making it look almost identical to a real Glock magazine. Loading BBs is done through the feed lips at the top of the magazine body using a speed loader and the gas fill valve is on the bottom, concealed beneath the baseplate. To access the fill valve, push the detent on the bottom of the baseplate inwards and slide the baseplate off. Compatibility wise, this magazine is designed specifically for the GHK OEM Glock 17 MOS and Glock 45 MOS and in all likelihood, won't work with other Glock or EU series platforms. 

If you're looking for magazines for your Army Armament R36 GBBR or WE G39C AR36 GBBR go no further as you have found them! This magazine fits these rifles ONLY and is not compatible with other brands AR36 varients. It has a realistic weight and ammo capacity, making it perfect for military operation enthusiasts or those who like to skirmish as realistically as possible.

The mag is constructed with a high-density polymer shell with alloy internals and is loaded through the feed lips at the top of the mag body with a speed loader, preferably with a GBB adapter. The gas fill valve is on the bottom of the magazine and requires the polymer bottom cover to be slid off for access. The magazine is compatible with both green gas and red gas, ready for most weather conditions.

The polymer shell also features grooves on either side, which allow multiple magazines to be attached to one another for easier storage or faster reloads. keep your R36 in the fight for longer with some spare magazines and outgun all your opponents on the battlefield. This trusty mag is sure to withstand even the harshest of skirmishing conditions.

If you have a GBB SCW-9 SMG and you need a spare magazine, this is for you! This magazine has a translucent polymer shell with realistic-looking faux bullets behind it. This gives it a very realistic look for all of you who enjoy your realism. The magazine holds a total of 45 BBs, a more realistic capacity compared to most common AEG magazines.

To load the Maruyama 45rnd Magazine For SCW-9, use a speedloader, preferably with a gas magazine attachment, on the feed lips. The gas inlet valve can be found on the bottom of the magazine and is constructed from brass, like most other inlet valves.

A magazine designed for WE brand AR36 / G39 Airsoft gas blowback rifles.

This magazine is a direct replacement for the original Double Eagle M62 magazine which came with it. The magazine is constructed from polymer and is fed by a spring meaning no rattle. The magazine holds up to 29 rounds, and is a great spare or replacement, or perfect purchase for anyone looking to increase the number of magazines they carry allowing them to remain in the field for longer.