Airsoft Under £50

Whether you need a robust backpack for outdoor pursuits or you're after a compact Airsoft kitbag, the 8Fields Tactical MOLLE Assault Backpack 15L is a great shout. Made from 1000D Nylon with polymer buckles and steel zips, the MOLLE Assault Backpack is water resistant thanks to its high stitch density, keeping its contents dry in all but the most torrential downpour.

The dual shoulder straps and back panel are comfortably padded with foam and vented mesh, keeping you cool and comfortable on your adventures. The combination of a dual strap design with a sternum strap and belt means you can carry heavy loads and distribute weight effectively, ensuring you dodge the aches and pains, even if you packed heavy!

Inside, we're treated to a spacious main compartment with internal dividers and a zip-secured organiser pocket, suitable for a wide range of cargo. The front pocket is also remarkably large, ideally suited to flat items up to 5cm deep like laptops, books, tablets and more. Two external pockets provide space for tools, documents, maps and other small items, keeping them easily accessible without the need to dig through the main pockets. Whether it's for travel, skirmishing or day-to-day use, the 8Fields MOLLE Assault Backpack 15L is a feature-rich, affordable option!

Whether you need a robust backpack for outdoor pursuits or you're after a compact Airsoft kitbag, the 8Fields Tactical MOLLE Assault Backpack 15L is a great shout. Made from 1000D Nylon with polymer buckles and steel zips, the MOLLE Assault Backpack is water resistant thanks to its high stitch density, keeping its contents dry in all but the most torrential downpour.

The dual shoulder straps and back panel are comfortably padded with foam and vented mesh, keeping you cool and comfortable on your adventures. The combination of a dual strap design with a sternum strap and belt means you can carry heavy loads and distribute weight effectively, ensuring you dodge the aches and pains, even if you packed heavy!

Inside, we're treated to a spacious main compartment with internal dividers and a zip-secured organiser pocket, suitable for a wide range of cargo. The front pocket is also remarkably large, ideally suited to flat items up to 5cm deep like laptops, books, tablets and more. Two external pockets provide space for tools, documents, maps and other small items, keeping them easily accessible without the need to dig through the main pockets. Whether it's for travel, skirmishing or day-to-day use, the 8Fields MOLLE Assault Backpack 15L is a feature-rich, affordable option!

Whether you need a robust backpack for outdoor pursuits or you're after a compact Airsoft kitbag, the 8Fields Tactical MOLLE Assault Backpack 15L is a great shout. Made from 1000D Nylon with polymer buckles and steel zips, the MOLLE Assault Backpack is water resistant thanks to its high stitch density, keeping its contents dry in all but the most torrential downpour.

The dual shoulder straps and back panel are comfortably padded with foam and vented mesh, keeping you cool and comfortable on your adventures. The combination of a dual strap design with a sternum strap and belt means you can carry heavy loads and distribute weight effectively, ensuring you dodge the aches and pains, even if you packed heavy!

Inside, we're treated to a spacious main compartment with internal dividers and a zip-secured organiser pocket, suitable for a wide range of cargo. The front pocket is also remarkably large, ideally suited to flat items up to 5cm deep like laptops, books, tablets and more. Two external pockets provide space for tools, documents, maps and other small items, keeping them easily accessible without the need to dig through the main pockets. Whether it's for travel, skirmishing or day-to-day use, the 8Fields MOLLE Assault Backpack 15L is a feature-rich, affordable option!

If you are in the process of adding some custom flair to your AAP-01, this part may be of interest to you! Introducing the Action Army Thumb Stopper for the AAP-01 Assassin GBB pistol, a "Gas Pedal" style thumb stop constructed from aluminium using CNC processes. This part is intended to provide additional recoil control and encourage a consistent grip by giving your thumb a place to rest, and letting you apply downforce to the muzzle to keep those full auto bursts under control!

The Stainless Steel Cylinder for CM.706 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.706 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

If you're running an upgraded or MOSFET-equipped AEG, this Gens Ace 11.1v 25C 1500mAh LiPo Battery may be just what you need to power it. This Lithium Polymer (LiPo) battery is pre-wired to a Deans/T-Plug battery connector and consists of 3 cell groups wired in nun-chuck/crane/butterfly configuration. The wire length between the cells and connector is approximately 8cm and each of the 3 cells measures approximately 0.8 x 1.6 x 13 cm. 

Not all Airsoft AEGs are capable of running an 11.1V LiPo without causing damage, if you are unsure check the recommended battery section of the your gun's product description. LiPo batteries require balance charging, meaning this battery MUST be charged using a LiPo balance charger with the balance port connected. We recommend using a battery charging bag for storage and charging, and to never leave an Airsoft battery on charge while unattended. 

If you need to carry some extra rounds for your SRC SR-SP GBB Pistol, you need a couple of these! Like most Airsoft pistol magazines, it features a double-stacked design, capable of holding up to 25 rounds. Ammunition can be loaded from the front either by hand or using an Airsoft speed loader, once the BB guide has been pulled to the bottom of the magazine.

This magazine can be filled with gas via the valve on the bottom through the base plate, which is removable, allowing easier access for any maintenance and can be replaced should the magazine become damaged. On closer inspection of the magazine, subtle Raven logos have been engraved into the bottom of the base plate, a tasteful finishing touch.

So your MK23 shoots as flat as a pancake out to 50m, why not give it some glass so you can take pure advantage of that impressive performance? Introducing the Laylax Nine Ball Custom "Gungnir" slide, an optics ready replacement slide for the TM MK23 and its clones, sporting a modernised design with two sets of backup iron sights. This slide is constructed from high density polymer, keeping the weight of your pistol to a minimum whilst giving it the added flair and functionality which comes with a custom slide. If you are looking for a way to add an optic to your MK23, this is the easiest and best looking (in our opinion) option out there!

If you are looking for a helmet but want to remain light on your feet, the FMA FAST BJ Helmet Replica is definitely worth a look. This helmet is styled after the Base Jump/Bump FAST helmet and features a built-in NVG mount at the front, ARC rails on either side and a ported shell to improve airflow and comfort along with reducing the chances of goggles fogging. 

Also featured in this helmet is the game-changing OCC adjustment dial, designed to keep the helmet super snug and stable on your head no matter what you have mounted or how hard you sprint. If you're planning on running a GoPro or other action camera to record your Airsoft escapades, this is one of the most stable platforms you can mount it to!

If you're building up your Hi-Capa with speed as the objective, you need the Airsoft Masterpiece DVC Flared Magwell for Hi-Capa GBB Pistols! Styled after the real steel DVC flared magazine well, this extension to the base of your grip helps guide your magazines in during an adrenaline-fueled reload, whether you're on the skirmish field or cleaning a course of fire in an IPSC competition.

A flared magazine well extension also enables "eyes-up" reloads so you can continue to scan for the next target as you bring your pistol back into action, an essential skill to have if you aim to be the fastest shooter you can. Compatibility-wise, this magwell is for the original Tokyo Marui Hi-Capa polymer frame and should fit most similar designs but won't work with aluminium frames or alternative frame designs. For a touch of style with a side of speed, you can't ask for better than the DVC Flared Magwell for Hi-Capa GBB Pistols from Airsoft Masterpiece!

A Tactical Soft Shell Jacket from Highlander, designed to provide you with the ultimate form of environmental element protection. Featuring multi-purpose pockets and a highly breathable AB-TEX shell this Jacket is a must have for the Stylish Operator!

A Real Wood handguard for the LCT LCK74 which is made to the original spec and includes a Steel Gas Tube. This is an ideal replacement for a damaged handguard, or to convert another LCT AK74 model.

If you like the style of micro red dots and want to mount one on your rifle at a comfortable height, then you need this! The PTS Syndicate Unity Tactical Fast™ MRDS mounts on 20mm Picatinny rails and includes an MRDS Adjustable Plate that fits most micro red dot footprints. These footprints include Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

It is constructed from CNC 6000 aluminium, making it durable and lightweight, perfect for agile skirmishers who like to keep a low profile on the battlefield. If you aim best with a micro red dot and want to comfortably mount one on something other than your pistol, you need the PTS Syndicate Unity Tactical Fast™ MRDS Mount w/MRDS Adjustable Plate!